MC74F169D - 4-Bit Synchronous Binary Counter | onsemi
MPN: MC74F169D ✗ Cuối đờiMC74F169D Tóm tắt
A synchronous counter is a logic IC whose internal counting stages update on the active clock edge. Compared with an asynchronous ripple counter, a synchronous design simplifies the relationship between clock and output transitions because the counter stages are driven together. The MC74F169D is based on the Fast Schottky TTL MC54/74F168 and MC54/74F169 family, whose documented operating characteristics are suited to high-speed digital systems.
The primary functional characteristics visible for MC74F169D include a 4-bit counter, positive-edge triggering, binary counting behavior, and a 16-SO package. The package suffix D identifies the lead configuration used in the ordering information. Exact propagation-delay, operating-voltage, current, and environmental limits should be taken from the manufacturer datasheet before release, rather than inferred from distributor catalog descriptions.
MC74F169D can be used in digital control systems where a compact modulo-16 counter is needed. Typical uses include sequencing multiple operating phases, dividing an incoming clock into slower timing intervals, generating repeatable four-bit state values, and advancing a small state machine. Positive-edge triggering allows the count to change on a selected rising transition instead of every transition of the input clock.
Circuit design should account for the unused control functions and asynchronous preset or clear inputs described by the manufacturer. The count outputs should be treated as ordinary CMOS or TTL-compatible logic signals within the device's specified voltage and fanout limits. A clean clock connection, adequate trace routing, and controlled grounding help preserve reliable operation at the switching rates intended for the Fast Schottky TTL family.
For new and legacy counter designs, MC74F169D offers a focused four-stage counting solution in a standard 16-pin SOIC footprint. This page combines the confirmed catalog specifications, package information, sourcing guidance, and practical considerations needed to evaluate the MC74F169D against other 4-bit synchronous counter implementations.
Bộ thay thế dễ dàng lắp đặt cho MC74F169D — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếMC74F169D Tỷ lệ tối đa & tính chất điện
| Counter Type | 4-stage synchronous binary counter |
| Counter Width | 4 bit |
| Counting Mode | Modulo-16 binary |
| Clock Edge | Positive edge |
| Logic Family | Fast Schottky TTL |
| Number of Count Stages | 4 stages |
| Hộp | 16-SO, 16-pin SOIC |
| Kiểu lắp đặt | Surface mount |
| Trạng thái RoHS | Not applicable |
| Device Classification | Counter IC |
| Chức năng | BCD counter, binary counter and decade counter functions |
| Supplier Packaging | Bulk |
Hướng dẫn cấu hình chân MC74F169D 16-so, 16-pin soic
Cấu hình chân cho MC74F169D (16-so, 16-pin soic gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho MC74F169D.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MC74F169D phù hợp cho 6 Áp dụngs: Digital State Sequencing, Frequency Division and Timing, Four-Bit Event Counter, Control-System Phase Sequencer, Legacy TTL Logic Repair, Pulse and Event Window Generator.
Digital State Sequencing
MC74F169D is suitable for a compact four-bit state-sequencing circuit because it provides four synchronous counter stages, positive-edge operation, and modulo-16 binary counting in a 16-pin SOIC package. A clock signal can advance the count through 16 defined states, allowing a controller to select one of 16 operating phases. Synchronous counter behavior helps keep state transitions aligned to the clock. Before implementation, confirm the numbered pin assignments, control-input polarity, voltage limits, and timing values in the manufacturer datasheet, then ensure that each output remains within the load requirements of the driven logic.
Frequency Division and Timing
The 4-bit modulo-16 architecture of MC74F169D makes it appropriate for generating a divided timing reference from an incoming clock. Connecting a selected count output back as the next-stage clock produces a slower periodic signal whose relationship to the source is determined by the counter sequence. Positive-edge triggering provides a defined update event for downstream logic. The design must provide a clean clock source, respect the device's specified operating voltage and maximum frequency, and account for propagation delay when the divided signal is chained into another timing stage.
Four-Bit Event Counter
MC74F169D can count a bounded sequence of external events and present the current count on four outputs. The positive-edge input allows a pulse train to be sampled on a selected transition, while the modulo-16 operation causes the count to roll over after the sixteenth event. This arrangement is useful for batch counting, event-window generation, and simple cyclic control. Designers should verify pulse width, edge-rate, setup timing, and output-load requirements against the manufacturer timing tables and include reset or preset control in the surrounding logic where required.
Control-System Phase Sequencer
The four counter outputs of MC74F169D can represent successive phases in a small control sequence. As the counter advances on the positive clock edge, the output combination can enable one stage at a time among up to 16 states. Because the device is fully synchronous, the counting stages are handled together, simplifying timing interpretation in a controller built around a common clock. Use the state outputs with suitable isolation or decoding logic, verify active levels of the preset and clear functions, and ensure the power supply and ground arrangement satisfy the device's operating requirements.
Legacy TTL Logic Repair
MC74F169D is particularly relevant to repair and replication of equipment built around the MC54/74F168 and MC54/74F169 Fast Schottky TTL family. Its confirmed 4-bit, positive-edge, modulo-16 behavior allows a technician to restore the original counting function without introducing a different logic family into an existing board. Compatibility still depends on the original schematic, supply voltage, input levels, output loading, and timing budget. Inspect the installed package markings and compare the complete manufacturer pin table before replacing the device or adapting the board.
Pulse and Event Window Generator
MC74F169D can serve as the basis of an event-window generator by combining its modulo-16 count with decoding logic. Each count state can represent a fixed portion of a timing cycle, and one decoded state can trigger or inhibit an external load. The positive-edge counter behavior provides a defined sampling instant for incoming activity, while the four outputs expose multiple phase positions. Validate input pulse duration, clock stability, reset timing, and decoded-output delay in the manufacturer datasheet. Add suitable output buffering when driving loads beyond the counter's specified fanout.
Dữ liệu tham khảo kỹ thuật cho MC74F169D — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
Ghi chú thiết kế
Do not treat every 4-bit counter as an MC74F169D replacement. The replacement must preserve the 16-lead footprint, positive-edge clocking, modulo-16 count behavior, and the active levels and timing of the preset and clear inputs. Compare the complete manufacturer pin table and timing characteristics with the original circuit before approving a substitute.
Route the clock as a controlled digital net and keep it away from switching power nodes and high-current outputs. The positive clock edge is the event that advances the four counting stages, so clock ringing or an unintended edge can shift the count sequence. Use a stable source, maintain a continuous return path, and observe the device's specified setup, hold, and maximum-frequency limits.
Place the counter close to the logic that consumes its four outputs, and place decoupling capacitance at the device's supply and ground pins using the layout and capacitance guidance in the manufacturer datasheet. Avoid routing count outputs into long paths adjacent to clock or preset traces. This reduces susceptibility to edge degradation, crosstalk, and supply disturbance in the 16-SO footprint.
Thông tin tuân thủ
One catalog listing reports RoHS status as not applicable. No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was confirmed for the exact MC74F169D device.