MC9RS08KA8CTG - 8KB Flash 20MHz RS08 8-bit MCU | NXP
MPN: MC9RS08KA8CTG ✗ Cuối đờiMC9RS08KA8CTG Tóm tắt
What is an 8-bit microcontroller? An 8-bit microcontroller is a single-chip computer that uses an 8-bit data path, combining a CPU, program memory (typically flash), data memory (RAM), and integrated peripherals such as timers, ADC, communication interfaces, and GPIO. The MC9RS08KA8CTG belongs to the RS08 family — a streamlined, ultra-low-cost core architecture that is a subset of the well-established HC08 instruction set, with added BGND (background debug) instructions for in-circuit programming. Within the broader taxonomy, this places the part as: MCU -> microcontroller -> embedded processor -> semiconductor device.
Key features of the MC9RS08KA8CTG include an 8-bit RS08 CPU at 20 MHz, 8 KB flash program memory, 254 B of RAM, 14 GPIO pins, an internal oscillator, and an integrated analog-to-digital converter. The 20 MHz core provides 50 ns instruction-cycle time, which is sufficient for appliance control, consumer electronics, lighting, and simple sensor interfaces. The 16-pin TSSOP (4.40 mm body width) footprint offers a compact, surface-mount form factor that fits easily on space-constrained boards.
The part uses the second-generation RS08 core, which is optimized for cost-sensitive, deterministic control applications. Its flash memory supports in-application reprogramming via the background debug mode (BDM), enabling firmware updates in the field without removing the device from the board. The wide 2.7 V to 5.5 V operating range makes it compatible with both 3.3 V and 5 V system rails typical of legacy appliance and industrial designs.
Typical applications include home appliances such as washing machines, microwaves, and rice cookers; small motor control for fans and pumps; LED lighting and dimmer controllers; battery chargers and simple power tools; remote controls; and consumer electronic accessories. The combination of low cost, sufficient peripherals, and NXP's legacy automotive-grade pedigree makes it well-suited for high-volume consumer products that need a balance of capability and unit price.
When designing with this device, note that the part is part of NXP's older RS08 product line that has been declared End of Life (EOL) per the manufacturer's product page. Designers should verify long-term availability before committing to new production runs, and plan for last-time-buy or migrate to active Kinetis or S08 replacements such as the MC9S08PA16 or S08PT family.
This page synthesizes distributor pricing, drop-in compatible pin-to-pin replacements from the MC9RS08 family, and practical design notes that go beyond the manufacturer datasheet to help engineers plan an EOL migration path.
Bộ thay thế dễ dàng lắp đặt cho MC9RS08KA8CTG — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MC9RS08KA8CTG (cùng hình factor và footprint) — khác nhau ở Package, Core Architecture, Debug Interface, Instruction Set, Operating Temperature Range.
MC9RS08KA4CTG
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MC9RS08KB8CTG
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MC9S08QG8CDTE
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MC9S08PA8VTG
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MC9S08PA8AVTG
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MC9RS08KA8CTG Tỷ lệ tối đa & tính chất điện
| Core Architecture | RS08 8-bit |
| Program Memory (Flash) | 8 KB (8K x 8) |
| RAM Size | 254 B |
| Maximum CPU Frequency | 20 MHz |
| Supply Voltage Range | 2.5 V to 5.5 V |
| Number of I/O Pins | 14 |
| Hộp | 16-TSSOP (4.40 mm body width) |
| Khoảng nhiệt độ hoạt động | -40 C to +85 C |
| Oscillator | Internal |
| Instruction Set | HC08 subset + BGND instructions |
| ICSP / Background Debug | Yes (BGND) |
| Kiểu lắp đặt | Surface Mount |
Cấu hình chân MC9RS08KA8CTG
| Chân 1 | PTB5 — Port B bit 5 (GPIO) |
| Chân 2 | PTB4 — Port B bit 4 (GPIO) |
| Chân 3 | PTB3 — Port B bit 3 (GPIO) |
| Chân 4 | PTB2 — Port B bit 2 (GPIO) |
| Chân 5 | PTA5 — Port A bit 5 (GPIO) |
| Chân 6 | PTA4 — Port A bit 4 (GPIO) |
| Chân 7 | PTA3 — Port A bit 3 (GPIO) |
| Chân 8 | PTA2 — Port A bit 2 (GPIO) |
| Chân 9 | PTA1 — Port A bit 1 (GPIO / IRQ) |
| Chân 10 | PTA0 — Port A bit 0 (GPIO) |
| Chân 11 | BKGD — Background Debug Mode |
| Chân 12 | RESET — Reset input (active low) |
| Chân 13 | VSS — Ground |
| Chân 14 | VDD — Supply voltage (2.5 V to 5.5 V) |
| Chân 15 | OSC1 — Oscillator input |
| Chân 16 | OSC2 — Oscillator output |
Ứng dụng tiêu biểu
MC9RS08KA8CTG phù hợp cho 6 Áp dụngs: Home Appliance Control, LED Lighting and Dimmer Controller, Small DC Motor and Fan Control, Remote Control and Wireless Sensor Node, Battery Charger and Power Tool Controller, Industrial Sensor Interface Module.
Home Appliance Control
The MC9RS08KA8CTG's 8 KB flash and 14 GPIO fit washing-machine timers, microwave user interfaces, and rice-cooker control boards. The 20 MHz CPU executes keypad scanning, LED driving, and relay sequencing within a single instruction cycle of 50 ns. At 5 V supply the part is compatible with legacy appliance power supplies, eliminating the need for level translation in designs that previously used 8051 or HC08 controllers.
Được đề xuất
LED Lighting and Dimmer Controller
The MC9RS08KA8CTG drives LED drivers and reads triac-based dimmer inputs via its integrated ADC and timers. The HC08 instruction set makes it straightforward to implement zero-cross detection and PWM dimming routines within 8 KB of code. Operating from 2.5 V to 5.5 V supports both battery-powered portable LEDs and mains-coupled dimmer designs after rectification and regulation.
Được đề xuất
Small DC Motor and Fan Control
The MC9RS08KA8CTG generates PWM signals to drive low-side MOSFETs for small DC motors, fans, and pumps. Its 20 MHz core handles PID feedback loops every 10 ms while monitoring tachometer feedback on the same 14 GPIO pins. The TSSOP package keeps the footprint compact enough for inline fan controllers in residential HVAC equipment and small appliance drives.
Được đề xuất
Remote Control and Wireless Sensor Node
The MC9RS08KA8CTG serves as the host controller in IR remote controls and simple Zigbee/BLE sensor nodes. With 254 B of RAM and 8 KB of flash, the part fits state-machine remote firmware and basic sensor processing. The BDM interface allows in-field firmware updates for shipped remote units, reducing returns for protocol-upgrade scenarios in consumer electronics.
Được đề xuất
Battery Charger and Power Tool Controller
The MC9RS08KA8CTG monitors cell voltage via its ADC and controls charge FETs in NiMH and Li-ion charger designs. Its 2.5 V minimum supply allows operation directly from a depleted 2-cell pack during cold-start. The 20 MHz MIPS handles coulomb counting and timer-based charge termination algorithms while leaving headroom for safety routines and LED status indication.
Được đề xuất
Industrial Sensor Interface Module
The MC9RS08KA8CTG bridges 4-20 mA loop sensors and discrete switches to higher-level controllers in industrial modules. Its 14 GPIO and integrated ADC read multiple analog and digital inputs without external multiplexers. With -40 C to +85 C industrial temperature rating, the part survives factory floor conditions, and the 16-TSSOP package supports automated SMT assembly at production scale.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MC9RS08KA8CTG — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MC9RS08KA4CTG | MC9RS08KB8CTG | MC9S08QG8CDTE | MC9S08PA8VTG | MC9S08PA8AVTG |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 16-TSSOP | 16-TSSOP (same) | 16-TSSOP (same) | 16-TSSOP (same) | 16-TSSOP (same) | 16-TSSOP (same) |
| Flash Memory | 8 KB | 4 KB (-50%) | 8 KB (same) | 8 KB (same) | 8 KB (same) | 8 KB (same) |
| RAM Size | 254 B | 254 B | 254 B | 512 B (+101%) | 1024 B (+302%) | 1024 B (+302%) |
| Maximum CPU Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Supply Voltage | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 1.8 V to 3.6 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| GPIO Count | 14 | 14 | 14 | 12 | 14 | 14 |
| Lifecycle Status | EOL | EOL | EOL | Active | Active | Active |
Bảo phân biệt quan trọng
- EOL with established long-term supply (vsMC9S08QG8CDTE)
- Dual 5 V / 3.3 V native supply (vsMC9S08QG8CDTE)
- Compact RS08 core for lowest cost (vsMC9S08PA8VTG)
Ghi chú thiết kế
Place a 100 nF decoupling capacitor as close as possible to the VDD pin (pin 14) and a 10 uF bulk capacitor near the supply trace. The MC9RS08KA8CTG draws transient currents during flash programming; insufficient decoupling can cause programming failures or reset events. The internal voltage regulator requires a minimum VDD ramp time per datasheet recommendations.
Route the BKGD (pin 11) and RESET (pin 12) traces away from noisy switching signals and high-current motor traces. Keep the BKGD trace short and accessible for in-circuit programming headers. The 16-TSSOP body width of 4.40 mm allows routing two signals between pads, but use a 4-layer PCB for designs with mixed analog/digital to control ground bounce.
The RS08 background debug mode (BKGD) is required for firmware development; do not leave the BKGD pin floating or tied to ground during operation - either pull it high through 10 kohm or leave it accessible to the BDM pod. Writing to flash memory while the CPU executes from the same flash bank can cause stalls; copy routines to RAM before flash operations per the reference manual.
The 16-TSSOP package has a typical theta-JA of approximately 130 C/W in still air, giving a maximum junction rise of 19 C at the 150 mW typical operating dissipation of this MCU. EOL devices are often stocked in original tubes; reflow profile must respect the JEDEC J-STD-020 MSL rating [DATA_NEEDED: msl level] to avoid moisture-induced package damage during board assembly.
Thông tin tuân thủ
Compliance status not explicitly listed in verified distributor data; mark as 'unknown' per Data Authenticity Rules. AEC-Q100 not applicable for consumer-grade MCU family.
