MC9S08DN60CLH - 8-Bit 40MHz 60KB Flash MCU | NXP
MPN: MC9S08DN60CLH ✓ Hoạt độngMC9S08DN60CLH Tóm tắt
A microcontroller is a programmable integrated circuit that combines a CPU core, memory, peripherals, and I/O in one device. The MC9S08DN60 family belongs to the 8-bit MCU hierarchy and includes mixed-signal and control resources for embedded systems. Flash memory retains programmed firmware without continuous power, while RAM supports working variables, stack operations, and peripheral data handling.
The verified data identifies a 16-channel, 12-bit ADC with a stated 2.5-second conversion time. The device supports up to 32 interrupt or reset sources, giving firmware multiple event-driven control paths. It uses an external oscillator according to the distributor specification summary. Its 53 available I/O pins provide substantial connectivity for sensors, actuators, displays, communications, and industrial control signals within a single package.
The 40MHz CPU operates with a 20MHz bus, balancing processing throughput against bus bandwidth and system requirements. The 60K x 8 Flash organization is suitable for firmware, tables, and boot or application code, while the 2K x 8 RAM organization provides 2KB of volatile storage. Because this is an MCU rather than a power semiconductor, a Safe Operating Area is not applicable.
Typical uses include industrial controllers, sensor acquisition systems, motor and relay control, keypad interfaces, embedded instrumentation, and compact control platforms. The broad pin count allows several peripheral functions to coexist, but final design selection requires the complete manufacturer datasheet for electrical limits, pin multiplexing, clocking, ADC behavior, and programming details.
When laying out a board, preserve the package pin assignments and expose programming, clock, reset, power, ground, and selected I/O functions correctly. Confirm the external clock requirements and ADC settling behavior against the manufacturer datasheet rather than relying only on distributor summaries. This page combines verified specifications, sourcing links, design guidance, and selection criteria for engineering review.
Bộ thay thế dễ dàng lắp đặt cho MC9S08DN60CLH — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MC9S08DN60CLH (cùng hình factor và footprint) — khác nhau ở Package, Number of I/O, Program Memory Size, RAM Size.
MC9S08DN48
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MC9S08DN32CLF
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MC9S08DN16CLC
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MC9S08DN60CLH Tỷ lệ tối đa & tính chất điện
| Product Type | 8-bit HCS08 microcontroller |
| Program Memory Size | 60KB (60K x 8) Flash |
| RAM Size | 2K x 8 bytes (2KB) |
| Number of I/O | 53 |
| CPU Speed | 40MHz |
| Bus Speed | 20MHz |
| CPU Architecture | HCS08 instruction set |
| Additional CPU Instruction | BGND |
| Interrupt and Reset Sources | Up to 32 sources |
| ADC Resolution | 12-bit |
| ADC Channels | 16 channels |
| ADC Conversion Time | 2.5 s |
| Oscillator Type | External |
| Hộp | 64-LQFP (10mm x 10mm) |
| Terminal Count | 64 terminals |
| Terminal Form | Gull wing |
| Package Code | LFQFP |
| Temperature Grade | Industrial |
| Kiểu lắp đặt | Surface mount |
| Packaging | Tray |
| Datasheet Flash Coverage | MC9S08DN60, MC9S08DN48, MC9S08DN32, MC9S08DN16 |
| Flash Operation Coverage | Full operating voltage and temperature |
Hướng dẫn cấu hình chân MC9S08DN60CLH lfqfp
Cấu hình chân cho MC9S08DN60CLH (lfqfp gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho MC9S08DN60CLH.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MC9S08DN60CLH phù hợp cho 6 Áp dụngs: Industrial Sensor Acquisition, Motor and Relay Control, Embedded Instrumentation Panel, Data Logger and Environmental Monitor, HMI and Keypad Interface, Communication Gateway.
Industrial Sensor Acquisition
The MC9S08DN60CLH fits industrial sensor acquisition where multiple analog channels and moderate control logic are required. Its verified 16-channel, 12-bit ADC provides a defined measurement resolution, while 60KB Flash accommodates acquisition routines, calibration tables, communications handlers, and diagnostics. The 53 I/O pins leave capacity for digital sensors, status indicators, alarms, and actuator-control signals. Designers should confirm analog input limits, sample timing, reference voltage, and external signal conditioning in the NXP datasheet before finalizing the front end.
Được đề xuất
Motor and Relay Control
The MC9S08DN60CLH is suitable as the supervisory controller in a motor or relay system because it combines a 40MHz CPU, 20MHz bus operation, 60KB Flash, and 53 I/O pins. Firmware can sequence outputs, monitor limit switches, debounce inputs, and implement safety interlocks while retaining enough memory for diagnostic logic. The MCU itself is not a power driver, so transistor, gate-driver, flyback, and protection components must be selected separately. Verify voltage levels, timing, and output current against the complete datasheet.
Được đề xuất
Embedded Instrumentation Panel
The MC9S08DN60CLH can serve as the controller in a compact instrumentation panel with local sensing, display control, keypad input, and status reporting. Its 60KB Flash provides room for menus, calibration data, conversion routines, and communication protocols, while the 53 I/O pins support display and keypad multiplexing. The 16-channel ADC can accept multiple analog inputs when the signal-conditioning network is designed carefully. Because panel environments may introduce electrical noise, use the manufacturer’s grounding, filtering, and layout recommendations.
Được đề xuất
Data Logger and Environmental Monitor
The MC9S08DN60CLH is appropriate for a data logger that periodically records sensor readings and stores or transmits them. Sixty kilobytes of Flash can hold firmware, event tables, and configuration data, while the 16-channel ADC supports a multi-sensor input plan. The 40MHz CPU supports filtering and control tasks, although actual logging throughput depends on the external storage interface and communication method. Confirm the ADC conversion timing, oscillator requirements, memory map, and available I/O functions in the datasheet before choosing storage and sensor components.
Được đề xuất
HMI and Keypad Interface
The MC9S08DN60CLH can coordinate a human-machine interface consisting of a display, keypad, LEDs, and local control outputs. Its 53 I/O pins provide more interface capacity than a small microcontroller, and 60KB Flash leaves space for screen state management, debounce logic, menu tables, and diagnostic messages. The 40MHz CPU gives adequate headroom for asynchronous serial or parallel display updates, but interface timing and pin multiplexing must be checked against the exact package data. Use suitable drivers for display current, voltage levels, and protection.
Được đề xuất
Communication Gateway
The MC9S08DN60CLH can serve as a low-power embedded gateway between local digital I/O and a communications interface when firmware size and control responsiveness are important. Its 40MHz CPU and 60KB Flash can support protocol framing, buffering, status reporting, and configuration, while 53 I/O pins allow multiple peripheral connections. The supplied data does not specify a dedicated UART, SPI, USB, or CAN peripheral, so protocol capability must be verified in the complete datasheet. Select external transceivers only after confirming electrical standards and pin multiplexing.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MC9S08DN60CLH — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MC9S08DN48 | MC9S08DN32 | MC9S08DN16 |
|---|---|---|---|---|
| Package | 64-LQFP (10mm x 10mm) | 64-LQFP package family candidate; exact package confirmation needed | 64-LQFP package family candidate; exact package confirmation needed | 64-LQFP package family candidate; exact package confirmation needed |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Program Memory | 60KB Flash | 48KB Flash | 32KB Flash | 16KB Flash |
Bảo phân biệt quan trọng
- Largest verified Flash capacity among the listed DN family comparison candidates (vsMC9S08DN48)
- Higher Flash capacity than the smaller DN family variants (vsMC9S08DN32)
- Substantially larger Flash allocation than the smallest listed family variant (vsMC9S08DN16)
- High-speed 8-bit control with 53 I/O (vsMC9S08DN48)
Ghi chú thiết kế
The supplied data does not provide the MC9S08DN60CLH supply-voltage range, absolute maximum ratings, or current limits. Before schematic design, consult the NXP datasheet for the permitted supply range and derive the bypass network from those limits. Do not assume that a 40MHz CPU rating permits a specific voltage or that the external oscillator can be connected directly without checking clock amplitude, frequency, and startup requirements.
Route the 64-LQFP footprint and all exposed programming, clock, reset, power, and ground connections exactly as specified by the NXP package drawing. Because the supplied data confirms a 64-terminal gull-wing package but not the complete pin map, do not release a PCB footprint from distributor summaries alone. Validate pin numbering, power pins, ground pins, and programming access against the manufacturer datasheet and package drawing.
The verified distributor summary states 2.5-second ADC conversion time, which may be unsuitable for applications expecting millisecond-scale or faster sampling. Confirm whether the figure applies to a specific mode, sample network, clock configuration, or the complete conversion sequence in the datasheet. Design filtering and acquisition timing around the verified ADC behavior rather than assuming a generic 12-bit ADC throughput.
Separate analog sensor inputs from high-current switching and digital timing paths, and follow the manufacturer’s grounding and decoupling recommendations. The 16-channel ADC and 53 I/O pins support a wide range of mixed-signal functions, but poor grounding or long analog traces can degrade measurements even when nominal resolution is 12-bit. Validate the complete signal path with the selected sensor impedance, reference source, filters, and operating clock.
Thông tin tuân thủ
The supplied verified data does not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Industrial temperature grade is stated by the distributor result, but that does not establish compliance certification.
