MCF5485CVR200 - ColdFire V4e 200MHz MPU | NXP | 388-PBGA
MPN: MCF5485CVR200 ✗ Cuối đờiMCF5485CVR200 Tóm tắt
A microprocessor unit (MPU) is a general-purpose processor IC that executes application firmware from external memory, as distinct from a microcontroller (MCU) which integrates program flash on-chip. The MCF5485CVR200 is ROMless, meaning it requires external boot memory, and sits within the NXP (formerly Freescale) embedded processor hierarchy: ColdFire V4e core -> MCF548x family -> 32-bit embedded MPU -> microprocessor.
Key features include the limited superscalar ColdFire V4e core with Harvard architecture, an MMU for virtual memory management, an FPU for floating-point math, and multiple connectivity peripherals including 10/100 Ethernet MAC, CAN, PCI, and other serial interfaces. The on-chip encryption accelerator targets secure communications in network-connected control applications.
The MCF548x architecture pairs the V4e core with a multi-function peripheral subsystem over an internal bus, allowing deterministic I/O throughput for industrial networking. The 200 MHz grade balances processing headroom against power consumption, and the 388-PBGA footprint is shared across the MCF547x/MCF548x families, enabling frequency-grade migration without PCB redesign.
Typical applications include industrial network controllers, secure gateways and routers, building automation, and medical instrumentation - anywhere Ethernet, CAN, and PCI connectivity with cryptographic offload is required.
Design consideration: because the device is ROMless, plan external NOR/NAND flash and SDRAM on the 32-bit bus and verify boot-time initialization against the manufacturer reference manual.
This page synthesizes distributor availability, MCF547x/MCF548x drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet. Note: this part is NRND (Not Recommended for New Designs) per NXP.
Bộ thay thế dễ dàng lắp đặt cho MCF5485CVR200 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MCF5485CVR200 (cùng hình factor và footprint) — khác nhau ở Encryption Accelerator, Package, FPU, Core Architecture, Ethernet.
MCF5484CVR200
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MCF5485CZP200
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MCF5475VR200
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MCF5474VR200
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MCF5472ZP200
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MCF5471VR200
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MCF5485CVR200 Tỷ lệ tối đa & tính chất điện
| Core Processor | ColdFire V4e (limited superscalar) |
| Core Size | 32-Bit |
| Speed | 200 MHz |
| Performance | 308 MIPS (Dhrystone @ 200 MHz) |
| Architecture | Harvard |
| MMU | Yes |
| FPU | Yes |
| Program Memory | ROMless (external memory required) |
| Bề rộng đường dữ liệu | 32 bit |
| Peripherals | Ethernet, CAN, PCI, encryption accelerator |
| Series | MCF548x ColdFire |
| Kiểu lắp đặt | Surface Mount |
| Hộp | 388-PBGA (27 x 27 mm) |
| Pin Compatibility | Pin-compatible with MCF547x family |
| Trạng thái RoHS | Details per NXP environmental page |
Hướng dẫn cấu hình chân MCF5485CVR200 388-pbga (27 x 27 mm)
Cấu hình chân cho MCF5485CVR200 (388-pbga (27 x 27 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho MCF5485CVR200.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MCF5485CVR200 phù hợp cho 6 Áp dụngs: Industrial Network Controllers, Secure Network Gateways and Routers, Building Automation Controllers, Medical Instrumentation Control, Embedded PCI / CompactPCI Boards, Legacy Sustaining Engineering (EOL Buffer).
Industrial Network Controllers
The MCF5485CVR200 fits industrial network controllers because its 200 MHz ColdFire V4e core (308 MIPS) with MMU can run a full TCP/IP stack while dedicated 10/100 Ethernet MAC, CAN, and PCI peripherals move fieldbus and backplane traffic without CPU intervention. Its hardware encryption accelerator secures industrial communication links, a growing requirement in Industry 4.0 retrofits. Typical topology places the MPU at the center of a controller card with external NOR flash for firmware and SDRAM for run-time data over the 32-bit bus. The determinism of the Harvard-architecture core supports cyclic control tasks, and the pin-compatible family allows cost-reduced variants (MCF5471/5472) for derivative products without PCB respin.
Được đề xuất
Secure Network Gateways and Routers
For secure gateways, the MCF5485CVR200 offers the combination that software-only solutions struggle with: Ethernet MAC plus a hardware encryption accelerator that offloads cryptographic processing from the 200 MHz V4e core. The MMU supports full embedded Linux or RTOS memory protection needed for multi-service gateway firmware, while 308 MIPS of Dhrystone throughput handles routing, firewall, and tunneling workloads at industrial data rates. PCI connectivity allows additional network interface expansion, and CAN covers management-plane communication. Because the device is NRND, new gateway designs should consider this part only for sustaining existing platforms; its drop-in family (MCF5484, MCF5475) enables BOM optimization of fielded gateway hardware.
Được đề xuất
Building Automation Controllers
Building automation controllers benefit from the MCF5485CVR200's blend of connectivity and control: Ethernet for BACnet/IP backbones, CAN for device-level fieldbuses, and sufficient 200 MHz processing for scheduling, HVAC control loops, and protocol translation. The MMU permits protected multitasking where tenant-facing and management firmware are isolated. The FPU accelerates floating-point control algorithms such as PID loops common in HVAC applications. The 388-PBGA footprint supports dense multi-port controller cards, and the pin-compatible MCF547x derivatives let product families span entry (MCF5472ZP200, on XAIPART) to premium (MCF5485) tiers from one PCB platform - reducing development and qualification cost across a controller lineup.
Được đề xuất
Medical Instrumentation Control
Medical instruments such as laboratory analyzers and patient-data concentrators require the MCF5485CVR200's mix of deterministic control, Ethernet for hospital network integration, and FPU-accelerated signal processing at 200 MHz. The MMU provides the memory protection valuable in software-validation regimes, isolating measurement firmware from communication stacks. The encryption accelerator supports patient-data security requirements for networked devices. The 32-bit external bus supports the substantial SDRAM needed by acquisition buffers. Note for new medical designs: the NRND status means this MPU is appropriate for sustaining validated legacy platforms where requalification of a new processor would be costly, while new instrument projects should select a current-generation processor with long-term availability commitments.
Được đề xuất
Embedded PCI / CompactPCI Boards
The MCF5485CVR200's integrated PCI controller makes it a natural CPU for embedded PCI and CompactPCI processor boards, historically common in industrial PCs and telecom line cards. The 200 MHz V4e core with 308 MIPS executes board management firmware and protocol stacks while the PCI block bridges to host systems at full bus bandwidth. Ethernet MAC enables management ports, and the MMU supports robust multitasking firmware. The ROMless design gives OEMs full control of boot firmware on their own flash devices - important for security-customized boards. Within the pin-compatible family, board vendors can populate MCF5471/5472 (lower cost) or MCF5484/5485 (full feature) on identical PCBs, simplifying product-tier management and end-of-life substitutions.
Được đề xuất
Legacy Sustaining Engineering (EOL Buffer)
A distinctive application of the MCF5485CVR200 today is sustaining engineering: keeping fielded ColdFire platforms alive after NXP moved the family to NRND. Design teams use its pin-compatible family members (MCF5484CVR200, MCF5475VR200, MCF5474VR200) as firmware-compatible spares for production lines, matching speed grade (200 MHz) and package (388-PBGA, 27 x 27 mm) exactly. The encryption accelerator and peripheral set of the MCF5485 preserve full functionality, while reduced variants serve where firmware does not touch the omitted blocks. This page consolidates family cross-compatibility and distributor sourcing to support last-time-buy planning and authorized/excess channel qualification - information not found in any single datasheet.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MCF5485CVR200 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MCF5484CVR200 | MCF5485CZP200 | MCF5475VR200 | MCF5474VR200 | MCF5472ZP200 | MCF5471VR200 |
|---|---|---|---|---|---|---|---|
| Package | 388-PBGA (27 x 27 mm) | 388-PBGA - same | 388-PBGA - same | 388-PBGA - same | 388-PBGA - same | 388-PBGA - same | 388-PBGA - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core / Speed | ColdFire V4e, 200 MHz | ColdFire V4e, 200 MHz | ColdFire V4e, 200 MHz | ColdFire V4e, 200 MHz | ColdFire V4e, 200 MHz | ColdFire V4e, 200 MHz | ColdFire V4e, 200 MHz |
| Performance | 308 MIPS @ 200 MHz | 308 MIPS | 308 MIPS | 308 MIPS | 308 MIPS | 308 MIPS | 308 MIPS |
| MMU / FPU | Yes / Yes | Yes / Yes | Yes / Yes | Yes / Yes | Yes / Yes | Yes / Yes | Yes / Yes |
| Peripheral Set | Full (Ethernet, CAN, PCI, serial) | Reduced | Full - same | Reduced | Reduced | Reduced | Most reduced |
Bảo phân biệt quan trọng
- Full peripheral complement in the MCF548x family (vsMCF5484CVR200)
- Hardware encryption accelerator (vsMCF5471VR200)
- Highest-feature variant for one PCB platform (vsMCF5472ZP200)
Ghi chú thiết kế
The MCF5485CVR200 is NRND per NXP. Any new design-in carries discontinuation risk; existing designs should secure stock through authorized distributors (DigiKey, Mouser, Newark) or XAIPART quote before the last-time-buy window is announced. Confirm the full peripheral set of any MCF547x/MCF548x substitute against your firmware's actual peripheral usage - the families are pin-compatible but peripheral loading differs, so a hardware drop-in can still fail if firmware accesses a block absent on the substitute.
Estimated: a 200 MHz ColdFire V4e with PCI, Ethernet, and encryption blocks typically dissipates on the order of 1-2 W; exact figures are not in the verified data, so consult the MCF548x datasheet power tables. The 388-PBGA dissipates through the PCB - use solid ground-plane copper coverage under the 27 x 27 mm ball field and thermal vias to inner layers. Verify junction temperature against the datasheet maximum for your enclosure ambient before finalizing airflow.
The ROMless architecture mandates external NOR flash and SDRAM on the 32-bit bus. Match trace lengths within the datasheet skew budget, terminate address/control lines per the reference manual, and keep the 27 x 27 mm BGA breakout to via-in-pad or dog-bone patterns with at least one solid via farm per power ball. Follow the MCF548x reference manual's boot-configuration pin strapping exactly; incorrect boot-mode strapping is a common first-bring-up failure on this family.
Thông tin tuân thủ
NXP provides a material declaration PDF (nxp.com/mcds/MCF5485CVR200.pdf) listing constituent materials; RoHS/REACH compliance status should be confirmed from that declaration or the NXP environmental quality page. No explicit compliance claims appear in the verified snippets.