MCP616-I/MS - 190kHz Micropower Op Amp | Microchip
MPN: MCP616-I/MS ✓ Hoạt độngMCP616-I/MS Tóm tắt
An operational amplifier, or op amp, is a voltage-feedback analog amplifier that provides high open-loop gain and is commonly configured with external components for amplification, filtering, buffering, comparison, and signal-conditioning functions. The op amp belongs to the linear amplifier hierarchy and ultimately supports analog signal-chain, instrumentation, industrial-control, and embedded-system designs.
The MCP616 combines low power consumption with rail-to-rail output swing. Its 190 kHz gain-bandwidth product supports signal processing at relatively low frequencies, while the typical 19 uA operating current is suitable for battery-operated and loop-powered equipment. The offset voltage below 150 uV helps minimize input-stage imbalance, and Microchip's advanced CMOS process provides low bias current, high open-loop gain, and high-speed operation.
The MCP616 uses a Bi-CMOS architecture and accepts a 2.3 V to 5.5 V supply. Its general-purpose design makes it suitable for portable measurements, low-end audio, industrial process control, data acquisition, test equipment, and sensors. The single-amplifier configuration minimizes board area where only one analog channel is required, although multi-channel systems may benefit from a dual or quad amplifier.
The -I suffix identifies the industrial temperature grade, while the /MS package code denotes the MSOP package variant. Surface-mount construction simplifies automated assembly but requires careful control of exposed-pad or lead soldering, copper thermal relief, and analog-signal routing. Review the manufacturer's pin-description and ordering tables before assigning PCB nets.
When designing around the MCP616-I/MS, verify the required input and output common-mode range for the selected gain configuration. Keep feedback-loop routing compact, provide stable bypass capacitance near the supply pins, and avoid placing high-current digital paths beneath sensitive analog inputs. The 190 kHz bandwidth makes it more appropriate for slow sensor and instrumentation signals than for wideband communications or video.
This product page combines manufacturer specifications, package details, practical application guidance, and same-family drop-in comparisons. It is designed to help engineers evaluate the MCP616-I/MS against alternative amplifiers while keeping the decisions tied to supply voltage, current consumption, gain-bandwidth product, offset voltage, and package compatibility.
Bộ thay thế dễ dàng lắp đặt cho MCP616-I/MS — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MCP616-I/MS (cùng hình factor và footprint) — khác nhau ở Amplifier Type, Input Offset Voltage, Number of Circuits, Package, Slew Rate.
MCP617-I/MS
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →MCP618-I/MS
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MCP619-I/MS
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MCP616-I/MS Tỷ lệ tối đa & tính chất điện
| Amplifier Type | General Purpose |
| Number of Circuits | 1 circuit |
| Supply Voltage Range | 2.3 V to 5.5 V |
| Gain-Bandwidth Product | 190 kHz |
| Typical Operating Current | 19 uA |
| Input Offset Voltage | <150 uV |
| Slew Rate | 0.08 V/us |
| Output Swing | Rail-to-rail |
| Process Technology | Advanced CMOS |
| Architecture | Bi-CMOS |
| Temperature Grade | Industrial |
| Hộp | 8-MSOP |
| Number of Terminals | 8 terminals |
| Package Width | 3.00 mm |
| Package Length | 0.118 inch |
| Kiểu lắp đặt | Surface Mount |
Hướng dẫn cấu hình chân MCP616-I/MS 0.118 inch
Cấu hình chân cho MCP616-I/MS (0.118 inch gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho MCP616-I/MS.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MCP616-I/MS phù hợp cho 6 Áp dụngs: Battery-Powered Sensor Conditioning, Portable Data Acquisition, Industrial Process Control, Low-End Audio Signal Path, Portable Test and Measurement, Loop-Powered Instrumentation.
Battery-Powered Sensor Conditioning
The MCP616-I/MS fits battery-powered sensor interfaces because it operates from 2.3 V to 5.5 V and consumes only 19 uA typical operating current. Its 190 kHz gain-bandwidth product is ample for common temperature, pressure, humidity, and level sensors that produce slowly changing analog voltages. The amplifier can provide gain or buffering ahead of an ADC while limiting battery drain. The 190 kHz bandwidth also leaves sufficient loop bandwidth for modest compensation networks, although capacitor selection and sensor-source impedance must be evaluated to prevent instability. Because the output is rail-to-rail, the circuit can use more of a low supply range, but input common-mode limits remain a separate design consideration near the rails.
Được đề xuất
Portable Data Acquisition
The MCP616-I/MS is appropriate for portable data-acquisition front ends requiring modest bandwidth and low operating current. A 190 kHz gain-bandwidth product can amplify sensor, transducer, and diagnostic signals without introducing the power cost of a high-speed amplifier, while offset voltage below 150 uV supports low-level measurements. Use the amplifier in a non-inverting or differential conditioning stage and select the external resistor values for the required closed-loop gain. Pay attention to source impedance because high source resistance combined with input capacitance can reduce phase margin. The 8-MSOP package supports compact instrument boards while retaining gull-wing leads that are inspectable after assembly.
Được đề xuất
Industrial Process Control
The MCP616-I/MS suits industrial process-control modules that monitor slow pressure, temperature, or valve-position signals. Its 19 uA typical operating current minimizes auxiliary power demand, while the industrial-temperature grade supports use across a wider ambient range than a consumer-grade amplifier. The device can buffer a transmitter output, amplify a scaled sensor signal, or form an active filter ahead of an ADC. Keep the feedback loop short on the PCB and avoid routing it alongside motor-control or relay-switching nodes. Because the gain-bandwidth product is 190 kHz, exceptionally fast loops, wideband isolation amplifiers, and video signals are better served by higher-bandwidth devices.
Được đề xuất
Low-End Audio Signal Path
The MCP616-I/MS can be used in low-end audio and microphone preamplifier circuits where low power and low cost are more important than wideband audio performance. The 190 kHz gain-bandwidth product provides substantially more bandwidth than typical human-audio frequencies, and the rail-to-rail output swing can improve utilization of a 2.5 V or 3.3 V supply. Input bias current and noise are important in microphone applications, so the manufacturer characteristic limits should be checked against the transducer source impedance. Add input filtering as required for RF immunity, keep the feedback components close to the device, and verify output headroom for the intended signal amplitude.
Được đề xuất
Portable Test and Measurement
The MCP616-I/MS is well matched to handheld meters and compact test instruments that need accurate low-level signal conditioning with low battery consumption. Its offset voltage below 150 uV is helpful when amplifying small transducer outputs, and the 190 kHz gain-bandwidth product supports meter-band and general-purpose diagnostic signals rather than high-speed waveform capture. The single amplifier in an 8-MSOP package leaves board area for measurement circuitry, power management, and an interface controller. Layout should isolate the analog input from display, switching, and reference-node drive paths. Stable feedback compensation and adequately decoupled supply rails are essential when a precision measurement is performed at low supply voltages.
Được đề xuất
Loop-Powered Instrumentation
The MCP616-I/MS is appropriate for loop-powered instrumentation because its 2.3 V minimum supply and 19 uA typical operating current support operation from constrained power budgets. The amplifier can buffer a sensor or transmitter at the input of a current-loop interface while the 190 kHz bandwidth comfortably covers conventional process-control bandwidth. The 8-MSOP package is useful in compact field transmitters. Nevertheless, the complete loop still needs adequate compliance voltage and current budget, and protection against polarity reversal or surge must be designed separately. Review the amplifier's input and output ranges at the lowest loop voltage to ensure the signal remains valid throughout startup and load changes.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MCP616-I/MS — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MCP617-I/MS | MCP618-I/MS | MCP619-I/MS |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-MSOP | 8-MSOP | 8-MSOP | 8-MSOP |
| Number of Circuits | 1 circuit | 1 circuit | 1 circuit | 1 circuit |
| Gain-Bandwidth Product | 190 kHz | 300 kHz | 500 kHz | 1.2 MHz |
| Supply Voltage Range | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V |
| Output Swing | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Temperature Grade | Industrial | Industrial | Industrial | Industrial |
Bảo phân biệt quan trọng
- Lower operating current supports battery and loop-powered designs (vsMCP619-I/MS)
- A 190 kHz response is optimized for slow precision signals rather than high-speed waveforms (vsMCP619-I/MS)
- Low offset voltage supports low-level measurement (vsMCP618-I/MS)
Ghi chú thiết kế
Place the input, output, feedback, and compensation components close to the MCP616-I/MS pins to minimize parasitic capacitance and feedback-loop area. Keep sensitive input traces away from switching-regulator outputs, relay contacts, high-current LED drivers, and digital clock lines. A solid ground plane and short ground-return paths help preserve accuracy when the amplifier is used with a high-impedance sensor.
Use local supply bypass capacitance close to the amplifier and follow the manufacturer recommendations for capacitor type, voltage rating, and effective capacitance across temperature. The MCP616-I/MS accepts a 2.3 V to 5.5 V supply, but its usable input and output range is narrower than the full supply in some operating conditions. Verify common-mode limits, output swing, and load current at the minimum system voltage before finalizing the power architecture.
Do not assume that rail-to-rail output means the input can also swing rail to rail. Review the MCP616 input common-mode range and the effects of output saturation on the feedback loop. Likewise, check stability with the actual sensor capacitance, cable length, and gain-setting resistors. A nominal 190 kHz gain-bandwidth product does not guarantee stability for every externally compensated configuration.
Thông tin tuân thủ
The industrial MCP616-I/MS ordering code identifies the temperature grade, but RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated in the cited product information.
