MKL24Z64VFT4 - 48MHz Cortex-M0+ 64KB MCU | NXP
MPN: MKL24Z64VFT4 ✓ Hoạt độngMKL24Z64VFT4 Tóm tắt
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The MKL24Z64VFT4 belongs to the Kinetis KL2x family, combining an Arm Cortex-M0+ core with USB 2.0 connectivity. This places it within the hierarchy of embedded processor, microcontroller, Kinetis L-series MCU, and low-power semiconductor, making it suitable for systems that require compact control and USB communication without a separate USB interface device.
The device operates at up to 48 MHz and includes 64 KB of flash for firmware and 8 KB of SRAM for working memory. Its full-speed USB 2.0 capability supports USB device or OTG-oriented designs, while the Kinetis L-series integration includes analog and timing peripherals for embedded measurement and control. The 48-QFN package also exposes a compact land pattern for space-constrained PCB layouts.
The Arm Cortex-M0+ architecture provides a straightforward low-complexity software platform for control loops, human-interface devices, portable instruments, and connected accessories. NXP describes the Kinetis KL2x family as pin, software, and tool compatible with other Kinetis L-series MCU families, supporting migration between related Kinetis designs. Firmware development therefore benefits from the broader Kinetis software ecosystem and reusable peripheral-driver patterns.
Typical uses include low-power USB data loggers, compact sensor interfaces, USB-connected test equipment, and portable measurement instruments. A designer can place the MCU beside a sensor or transducer, run control and sampling routines from flash and SRAM, and use the integrated USB controller for configuration, data transfer, or firmware updates. The exact USB operating mode and peripheral allocation must be confirmed against the selected device configuration in the manufacturer datasheet.
PCB implementation requires careful treatment of the exposed pad, power rails, decoupling, and USB signal routing. Keep the USB D+ and D- traces short and impedance-controlled, provide the decoupling network specified by the datasheet, and use a thermal-via pattern beneath the exposed pad when required by the PCB stack-up. Confirm all VDD, VDDUSB, VDDIO, ground, reset, and programming pins against the package drawing before fabrication.
This page combines the exact MKL24Z64VFT4 identity and package information with lifecycle, pricing, sourcing, and interface details. It also organizes verified same-brand alternatives and practical implementation guidance for engineers comparing the KL2x family with adjacent Kinetis L-series devices.
Bộ thay thế dễ dàng lắp đặt cho MKL24Z64VFT4 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
MKL25Z64VFT4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MKL26Z64VFT4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MKL24Z64VFT4 Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit microcontroller |
| Processor Core | Arm Cortex-M0+ |
| Maximum Core Frequency | 48 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| SRAM | 8 KB |
| USB Interface | Full-speed USB 2.0 |
| USB Controller Type | USB device or OTG controller |
| Hộp | 48-QFN, 7 x 7 mm |
| Total Pins | 48 pins |
| Điện áp cung cấp hoạt động | 1.71 V to 3.6 V |
| Core Architecture | ARM 32-bit |
| Family | Kinetis KL2x |
| Series | Kinetis KL2 |
| Power Management | Ultra-low-power MCU with integrated low-voltage regulator |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân MKL24Z64VFT4 48-qfn, 7 x 7 mm
Cấu hình chân cho MKL24Z64VFT4 (48-qfn, 7 x 7 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho MKL24Z64VFT4.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MKL24Z64VFT4 phù hợp cho 6 Áp dụngs: USB-connected sensor interface, Portable data logger, USB test and measurement instrument, Human-interface accessory, Industrial control module, USB firmware-update controller.
USB-connected sensor interface
The MKL24Z64VFT4 fits compact USB sensor interfaces because its 48 MHz Arm Cortex-M0+ core can execute sampling, filtering, and control routines while the integrated full-speed USB 2.0 controller handles data transfer. Its 64 KB flash provides room for device firmware, and 8 KB of SRAM supports short acquisition and processing buffers. Place the MCU near the sensor circuitry, connect USB D+ and D- to controlled-impedance routing, and confirm that the selected USB role and pin assignments match the board-level connector and power design.
Được đề xuất
Portable data logger
A portable data logger can use the MKL24Z64VFT4 for low-power acquisition, local control, and USB export. The 48 MHz Cortex-M0+ processor provides enough performance for sensor polling and buffered data processing, while 64 KB of flash holds firmware and 8 KB of SRAM handles short working windows. The ultra-low-power Kinetis KL2x positioning supports compact instrument designs, but sleep-mode current, data-retention behavior, and wake-up time must be evaluated for the intended duty cycle before finalizing the battery budget.
Được đề xuất
USB test and measurement instrument
The MKL24Z64VFT4 is appropriate for USB-connected test and measurement equipment that requires local computation and peripheral control. Its 48 MHz Cortex-M0+ core can supervise instrument functions, while the integrated full-speed USB 2.0 interface supports command exchange or captured-data transfer. The 8 KB SRAM can support real-time buffers, and the 48-QFN 7 x 7 mm package preserves board area in handheld or bench instruments. Use the datasheet pin and reference-circuit guidance for analog, clock, and USB implementation.
Được đề xuất
Human-interface accessory
Compact human-interface accessories can use the MKL24Z64VFT4 to combine control logic, status indication, and USB connectivity in one device. Its 64 KB flash supports embedded firmware, the 8 KB SRAM accommodates short interaction buffers, and the 48 MHz Cortex-M0+ core provides responsive peripheral handling. The 48-QFN 7 x 7 mm footprint also allows the controller to sit close to the connector and user-interface circuitry. Designers should budget USB connection-state handling, ESD protection, power sequencing, and firmware update behavior according to the product requirements.
Được đề xuất
Industrial control module
The MKL24Z64VFT4 can serve as the control processor in a compact industrial module that monitors inputs and communicates through USB. Its 48 MHz Cortex-M0+ core handles deterministic control tasks, while integrated analog and timing peripherals support measurement and event processing. The 1.71 V to 3.6 V operating range supports low-voltage embedded rails, and the 48-QFN package simplifies dense module construction. Industrial qualification requirements, isolation boundaries, environmental limits, and applicable sector standards must be evaluated independently of the MCU's general-purpose feature set.
Được đề xuất
USB firmware-update controller
The MKL24Z64VFT4 can manage firmware storage and USB firmware-update workflows in a connected embedded product. Its 64 KB flash provides a defined code and update-buffer budget, while the integrated full-speed USB 2.0 controller supports a direct host-to-device update path. The Cortex-M0+ architecture is suitable for simple command parsing, image validation, and status reporting. Implement a robust bootloader, verify image integrity before activation, protect unauthorized writes as appropriate, and separate USB activity from critical real-time control functions.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MKL24Z64VFT4 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MKL25Z64VFT4 | MKL26Z64VFT4 |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 48-QFN (7x7) | 48-QFN (7x7) | 48-QFN (7x7) |
| Maximum Frequency | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB |
| Special Features | Full-speed USB 2.0, ultra-low-power operation, analog and timing peripherals | Related Kinetis KL2x feature set | Related Kinetis KL2x connectivity feature set |
Bảo phân biệt quan trọng
- Direct KL2 full-speed USB positioning (vsMKL25Z64VFT4)
- 64 KB flash and 48 MHz processing in a compact package (vsMKL26Z64VFT4)
- Low-voltage embedded operating range (vsMKL25Z64VFT4)
Ghi chú thiết kế
Treat the 48-QFN exposed pad as both a thermal and electrical land. Follow the manufacturer package drawing for pad dimensions, solder-mask opening, and paste geometry. Place VDD, VDDUSB, VDDIO, and ground decoupling capacitors close to their assigned pins, with each capacitor return routed directly into the ground plane. Avoid placing long traces beneath USB pairs or splitting return paths in the connector-to-MCU region.
Route USB D+ and D- as a tightly coupled, impedance-controlled pair with a continuous reference plane and no unnecessary stubs. Match the trace geometry to the PCB stack-up and connector requirements, and keep switching or high-current paths away from the pair. Provide the USB transceiver support components shown in the manufacturer reference circuit, and validate differential impedance, skew, and ESD protection before production release.
Create a clean supply network for VDD, VDDUSB, and VDDIO rather than treating them as interchangeable rails. Follow the manufacturer pin table and reference circuit for which supplies may be tied together, their permitted voltage combinations, and decoupling values. Confirm the regulator startup sequence, USB attach behavior, and current limits in the selected configuration. This is especially important when a device must enumerate reliably while remaining in a low-power state.
Do not treat compatibility within the Kinetis KL2x family as proof that every peripheral and pin can be substituted without review. Check the individual device pin table, USB controller role, alternate-function mapping, clock sources, analog channels, and startup behavior. When moving from MKL24Z64VFT4 to MKL25Z64VFT4 or MKL26Z64VFT4, review the compiler project configuration and startup code as well as the PCB because firmware abstractions can hide peripheral differences.
Thông tin tuân thủ
The exact package, memory, processor, USB, voltage, lifecycle, and environmental information for MKL24Z64VFT4 is listed by NXP, while specific compliance declarations are not stated in the referenced product result.