MP1720DQ-3-LF-P - 2.7W Class-D Mono Amplifier | MPS
MPN: MP1720DQ-3-LF-P ✓ Hoạt độngMP1720DQ-3-LF-P Tóm tắt
A Class-D audio amplifier is a power-management semiconductor that converts an analog audio input into a high-frequency switching output capable of driving a loudspeaker efficiently. Within the broader hierarchy, it is an audio amplifier IC, a power-management IC, and a semiconductor. Unlike a conventional linear Class AB output stage, the MP1720 uses a switching full-bridge architecture, reducing the amount of power dissipated as heat while delivering audio energy to the speaker.
The MP1720 integrates the 250 mΩ power MOSFETs, startup and shutdown pop-elimination circuitry, and short-circuit protection. According to the Monolithic Power Systems MP1720 product result, these functions allow a compact audio-output solution with reduced external component count. The stated 90% efficiency is especially relevant in portable audio products where amplifier dissipation directly affects battery life and enclosure temperature. The exact efficiency conditions, thermal ratings, and protection thresholds require confirmation from the manufacturer datasheet.
The full-bridge output can drive a single 4 Ω speaker at up to 2.7 W. Because the output is bridge-tied, the speaker receives the differential voltage generated between the two output nodes. Designers must keep the BTL speaker wiring isolated from system ground and should use a speaker return path that satisfies the requirements of the application. Feedback and input filtering details should be implemented with the component values and topology shown in the official MP1720 documentation.
Typical uses include compact Bluetooth speakers, portable speakers, sound bars, consumer audio modules, and other low-voltage embedded audio products. The 3.3 V supply and 2.7 W output rating align well with battery-powered equipment whose speaker impedance is 4 Ω. A system requiring higher output power, a different supply voltage, stereo operation, or a different pinout should not be treated as a direct replacement without a complete electrical comparison.
The primary design considerations are exposed-pad layout, input and output filtering, speaker return routing, thermal performance, and startup behavior. Place the device close to the speaker connector to minimize switching-node trace length, and provide a continuous low-impedance ground plane around the exposed pad. Decoupling and passive-component values must be confirmed against the official datasheet and typical application circuit.
This page separates verified MP1720DQ-3-LF-P facts from unverified details. It combines the manufacturer product information, distributor packaging data, replacement-search findings, and engineering guidance without inventing pin assignments, thermal figures, compliance declarations, or prices that were not present in the supplied source data.
Bộ thay thế dễ dàng lắp đặt cho MP1720DQ-3-LF-P — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếMP1720DQ-3-LF-P Tỷ lệ tối đa & tính chất điện
| Product Type | Mono Class-D audio amplifier |
| Maximum Output Power | 2.7 W into 4 Ω |
| Cấu hình đầu ra | 1 channel (mono), full bridge |
| Output Topology | Bridge-tied load (BTL) |
| Hiệu suất | 90% |
| Integrated Power MOSFET Resistance | 250 mΩ at VIN = 3.3 V |
| Integrated Protection | Short-circuit protection |
| Startup and Shutdown Feature | Pop elimination |
| Hộp | 10-QFN, 3 mm × 3 mm |
| Kiểu lắp đặt | Surface mount |
| Exposed Pad | Present |
| Channel Count | 1 channel |
| Recommended Speaker Impedance | 4 Ω |
Hướng dẫn cấu hình chân MP1720DQ-3-LF-P 10-qfn, 3 mm × 3 mm
Cấu hình chân cho MP1720DQ-3-LF-P (10-qfn, 3 mm × 3 mm gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho MP1720DQ-3-LF-P.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MP1720DQ-3-LF-P phù hợp cho 6 Áp dụngs: Portable Bluetooth Speaker, Battery-Powered Speaker, Soundbar Speaker Channel, Consumer Audio Module, USB and Desktop Audio, Compact IoT Voice Node.
Portable Bluetooth Speaker
The MP1720DQ-3-LF-P fits a compact mono Bluetooth-speaker output stage because it can deliver 2.7 W into a 4 Ω driver from a low-voltage design. Its stated 90% efficiency can reduce amplifier heat and improve battery utilization, while the integrated 250 mΩ power MOSFETs reduce the number of external output-switching components. The 10-QFN, 3 mm by 3 mm surface-mount package also supports compact PCB layouts. Designers should place the exposed pad on a low-impedance thermal and ground plane, keep switching outputs away from sensitive input routing, and confirm the exact supply range and thermal limits in the manufacturer datasheet.
Battery-Powered Speaker
A battery-powered speaker benefits from the MP1720DQ-3-LF-P because the full-bridge Class-D topology is intended to provide high efficiency while driving a 4 Ω load. The verified 2.7 W capability is appropriate for a compact internal driver, and the manufacturer identifies integrated pop elimination for startup and shutdown, helping reduce audible transients during power-state changes. Short-circuit protection is also integrated. Battery current, charging-system compatibility, speaker impedance under its operating excursion, and the device's exact low-voltage operating limits must still be verified before production release.
Soundbar Speaker Channel
The MP1720DQ-3-LF-P can serve as a compact mono amplification channel in a soundbar or small multi-speaker system. Its verified 2.7 W into 4 Ω output rating fits low-impedance drivers, while the 10-QFN package reduces board area compared with larger discrete amplifier layouts. The integrated full-bridge switches and stated 90% efficiency make the part relevant where enclosure space and power consumption are constrained. Because a bridge-tied output has no grounded speaker terminal, system wiring must remain isolated, and the manufacturer must confirm channel interaction, EMI layout, and thermal performance in the target enclosure.
Consumer Audio Module
For a compact consumer-audio module, the MP1720DQ-3-LF-P provides a straightforward Class-D output stage with verified 2.7 W capability into 4 Ω. Integrated startup and shutdown pop elimination supports cleaner power transitions, while short-circuit protection reduces the need for separate output-stage safeguards. The exposed-pad QFN requires careful PCB land-pattern and thermal-via implementation to remove heat generated by the switching output stage. Input and feedback networks must follow the official application circuit, and the amplifier's verified electrical envelope must be checked against the module's supply, speaker, and environmental requirements.
USB and Desktop Audio
The MP1720DQ-3-LF-P can support a small USB-powered or desktop-audio speaker module when the available power and speaker loading are compatible with its verified 2.7 W into 4 Ω capability. The surface-mount 3 mm by 3 mm package is useful where a conventional Class AB output stage would occupy excessive board area. Its stated 90% efficiency can improve the relationship between input power and delivered speaker power. However, USB power-source limits, inrush behavior, EMI filtering, and continuous-output thermal conditions must be evaluated using the official datasheet rather than inferred from the headline power rating.
Compact IoT Voice Node
The MP1720DQ-3-LF-P is applicable to a compact IoT voice node that drives a local 4 Ω speaker. The 2.7 W mono output, integrated short-circuit protection, and startup and shutdown pop elimination support a small audio endpoint where board area and robustness matter. Its switching architecture operates from a 3.3 V-oriented power stage according to the verified MOSFET specification, but the complete acceptable supply range must be confirmed from the datasheet. Place the exposed pad over a solid ground region with thermal vias, route BTL outputs as a differential pair, and keep the analog input path away from switching nodes.
Dữ liệu tham khảo kỹ thuật cho MP1720DQ-3-LF-P — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Package | 10-QFN, 3 mm × 3 mm |
| Brand | Monolithic Power Systems |
| Amplifier Type | Mono Class-D audio amplifier |
| Output Configuration | Full bridge (BTL) |
| Maximum Output Power | 2.7 W into 4 Ω |
| Efficiency | 90% |
| Integrated Power MOSFET Resistance | 250 mΩ at VIN = 3.3 V |
| Short-Circuit Protection | Integrated |
Bảo phân biệt quan trọng
- Compact integrated Class-D output stage (vsMP1720DQ-3-LF)
- High-efficiency full-bridge architecture (vsDiscrete Class-AB speaker output)
- Integrated protection and click reduction (vsUnprotected discrete switching output)
Ghi chú thiết kế
Use the manufacturer land pattern for the 10-QFN, 3 mm by 3 mm package and place the exposed pad over a continuous ground copper region. Add multiple thermal vias only where the recommended pad and assembly process permit them. Keep the input and feedback traces away from the bridge-tied speaker outputs and the exposed-pad switching current path.
The stated 90% efficiency reduces dissipation relative to a linear output stage, but it does not eliminate thermal design requirements. Validate worst-case output power, supply voltage, ambient temperature, and board copper using the manufacturer thermal information. Do not treat the 2.7 W speaker-power rating as independent of supply headroom or junction-temperature limits.
The MP1720 uses a bridge-tied full-bridge output, so neither speaker terminal should be connected to system ground. Route the two output nodes as a compact differential pair to the speaker connector, keep the output loop small, and provide the input filtering and feedback components exactly as shown in the official application circuit.
Do not assume that another Class-D amplifier with a similar 2.7 W rating is a drop-in replacement. Pin numbering, exposed-pad connections, supply limits, feedback topology, gain-setting resistors, switching frequency, EMI behavior, and shutdown logic can differ even when the package dimensions match. Validate any substitution against the official MP1720 pinout and application schematic.
Thông tin tuân thủ
No specific compliance declaration was present in the supplied manufacturer or distributor snippets. The -LF ordering suffix must not be treated as proof of a particular compliance status without supporting manufacturer documentation.
