MPC8535EBVTAKGA - PowerPC e500 MPU 600MHz 783-FCPBGA | NXP
MPN: MPC8535EBVTAKGA ✓ Hoạt độngMPC8535EBVTAKGA Tóm tắt
A microprocessor (MPU) is the central processing unit of an embedded system, executing operating systems and application software while interfacing with external memory and peripherals. The MPC85xx family sits within NXP's Power Architecture embedded processor portfolio, a hierarchy that spans PowerPC -> Power Architecture -> embedded microprocessor -> system-on-chip-class CPU. These devices typically integrate memory controllers, local bus interfaces, and security accelerators, reducing external component count in routers, switches, and industrial gateways.
Key features of the MPC8535EBVTAKGA include a 32-bit PowerPC e500 core running at 600 MHz, integrated security acceleration logic, on-chip L1/L2 cache, and a high-bandwidth system bus for memory and I/O. The 783-FCPBGA (29 mm x 29 mm) package supports the high I/O count demanded by dual Gigabit Ethernet controllers, DDR memory interface, PCI Express, and local bus interfaces present in the family.
The MPC8535 architecture pairs the e500 core with a dedicated system interface unit, allowing the processor to issue memory transactions in parallel with DMA operations. This parallelism is critical for networking line cards where sustained packet throughput must coexist with control-plane software execution. The "EB" designator indicates the encryption-enabled security engine, used for IPsec, SSL, and other cryptographic workloads.
Typical applications include wired and wireless edge routers, industrial Ethernet gateways, networked storage controllers, and defense/aerospace secure processing platforms. Designers select this part when PowerPC software compatibility is required and integrated security is desired without external crypto coprocessors.
When designing with the MPC8535EBVTAKGA, allocate at least four PCB layers with a solid ground plane beneath the BGA to manage the 600 MHz switching currents. Decouple each power domain with bulk, mid-range, and high-frequency ceramic capacitors placed as close as possible to the package vias.
This page synthesizes distributor pricing, drop-in alternatives, package geometry, and practical design notes not duplicated on distributor product pages, giving engineers a single reference for evaluation, sourcing, and PCB-level integration.
Bộ thay thế dễ dàng lắp đặt cho MPC8535EBVTAKGA — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MPC8535EBVTAKGA (cùng hình factor và footprint) — khác nhau ở Operating Temperature, Package, Core Architecture, Memory Controller, Series.
MPC8535ECVTAKGA
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MPC8535EBVTANGA
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MPC8535EBVTAULA
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MPC8535EBVTAKGA Tỷ lệ tối đa & tính chất điện
| Manufacturer | NXP Semiconductors (formerly Freescale Semiconductor) |
| Series | MPC85xx |
| Core Processor | PowerPC e500 |
| Number of Cores | 1 |
| Bề rộng đường dữ liệu | 32-bit |
| Core Speed | 600 MHz |
| Hộp | 783-FCPBGA (29 mm x 29 mm) |
| Kiểu lắp đặt | Surface Mount |
| IC Type | Microprocessor (MPU) |
| Security/Crypto Engine | Yes (EB suffix indicates encryption-enabled variant) |
| Nhiệt độ hoạt động | 0C to +105C (industrial extended range per FCPBGA class) |
| Cấp MSL | 3 (168 hours, JEDEC J-STD-020) |
| Trạng thái RoHS | Compliant |
| Lead Free | Yes |
| Family | Power Architecture Embedded Microprocessor |
Hướng dẫn cấu hình chân MPC8535EBVTAKGA 783-fcpbga (29 mm x 29 mm)
Cấu hình chân cho MPC8535EBVTAKGA (783-fcpbga (29 mm x 29 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho MPC8535EBVTAKGA.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MPC8535EBVTAKGA phù hợp cho 6 Áp dụngs: Industrial Ethernet Switches and Gateways, Networked Attached Storage (NAS) Controllers, Secure Routers and VPN Concentrators, Defense and Aerospace Secure Processing, Smart Grid and Energy Substation Gateways, Printer and Imaging Controllers.
Industrial Ethernet Switches and Gateways
The MPC8535EBVTAKGA's dual Gigabit Ethernet MACs, hardware AES/3DES/SHA crypto engine, and 32-bit PowerPC e500 core at 600 MHz make it well matched to managed industrial Ethernet switches and protocol-conversion gateways. It runs Linux, VxWorks, or Green Hills INTEGRITY with deterministic thread scheduling for real-time control loops while accelerating IPsec tunnels for OT/IT segmentation. The 0C-to-+105C industrial-extended temperature grade supports factory-floor enclosures and outdoor telecom cabinets without active cooling. Drop it onto a 4-layer PCB with the 783-FCPBGA land pattern, and pair it with a DDR2 SODIMM or chip-down memory to keep bill-of-materials cost under USD 250 per line card.
Được đề xuất
Networked Attached Storage (NAS) Controllers
The MPC8535EBVTAKGA integrates a high-bandwidth system bus, DDR memory controller, and PCI Express connectivity that suit NAS controller boards serving small-business RAID arrays. The e500 core runs the storage-stack protocol (SMB, NFS, iSCSI) while the integrated crypto engine accelerates AES-XTS full-disk encryption at line rate, avoiding throughput bottlenecks of software-based crypto. Compared to discrete MPU + external crypto-chip designs, the EBVTAKGA reduces board area by approximately 30 percent and BOM cost by USD 15-25 per unit, while the 783-FCPBGA package remains manufacturable on standard 4-mil PCB processes.
Được đề xuất
Secure Routers and VPN Concentrators
Routing and VPN-concentrator appliances benefit from the MPC8535EBVTAKGA's hardware-accelerated IPsec, the e500 core's deterministic packet-processing throughput, and the integrated PCI Express root complex that links to multi-port Gigabit Ethernet PHYs. The 600 MHz clock rate sustains approximately 1 Gbps of IPsec traffic with AES-256-SHA1, while Linux/VxWorks routing stacks run on the same die without contention. The 783-FCPBGA (29x29 mm) package gives adequate thermal headroom at full crypto load and fits standard 1U appliance motherboards.
Được đề xuất
Defense and Aerospace Secure Processing
Defense system designers select the MPC8535EBVTAKGA when they need PowerPC software compatibility (legacy mission code), hardware-rooted cryptography, and an industrial-extended temperature range for ground-vehicle and avionics line-replaceable modules. The encryption engine provides FIPS-140-2 capable AES and SHA primitives, and the 783-FCPBGA package offers the long-term reliability expected in defense programs with 10-15 year field lifecycles. Designers should validate against MIL-STD-810 shock/vibration and confirm NXP's long-term supply commitment in writing.
Được đề xuất
Smart Grid and Energy Substation Gateways
Substation gateways and intelligent electronic devices (IEDs) use the MPC8535EBVTAKGA to bridge IEC 61850 process bus traffic to utility control centers. The device's hardware crypto engine secures GOOSE and MMS messages via IEC 62351, the PowerPC e500 provides real-time determinism required for protection schemes, and the 0C-to-+105C range tolerates substation ambient temperatures without fans. Pairing with isolated serial transceivers and dual Ethernet PHYs yields a robust substation-hardened gateway built around a single 783-FCPBGA MPU.
Được đề xuất
Printer and Imaging Controllers
Workgroup and production-print engines use the MPC8535EBVTAKGA as the main image-processing controller, where 600 MHz of PowerPC e500 throughput accelerates raster image processing (RIP) and page-description language interpretation (PostScript, PCL, PDF). PCI Express links to imaging ASICs, the DDR controller feeds high-resolution raster buffers at GB/s rates, and the integrated crypto engine enables secure print and pull-printing workflows. The 783-FCPBGA package's 29x29 mm footprint fits standard printer controller board footprints, enabling reuse across multiple product SKUs.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MPC8535EBVTAKGA — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MPC8535ECVTAKGA | MPC8535EBVTANGA | MPC8535EBVTAULA |
|---|---|---|---|---|
| Package | 783-FCPBGA (29x29) | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same |
| Brand | NXP Semiconductors | NXP Semiconductors (same) | NXP Semiconductors (same) | NXP Semiconductors (same) |
| Core Architecture | PowerPC e500 | PowerPC e500 (same) | PowerPC e500 (same) | PowerPC e500 (same) |
| Core Speed | 600 MHz | 600 MHz (same) | 600 MHz (same) | 600 MHz (same) |
| Operating Temperature | 0C to +105C (industrial-extended) | 0C to +70C (commercial) | 0C to +105C (same) | 0C to +105C (same) |
| Hardware Crypto Engine | Yes (EB suffix, encryption-enabled) | Yes (EC suffix, encryption-enabled) | Yes (EB suffix, encryption-enabled) | Yes (EB suffix, encryption-enabled) |
| Orderable Variant Code | AKGA (tray packaging) | AKGA (commercial temp) | ANGA (Pb-free/Green) | AULA (tape-and-reel variant) |
| RoHS Compliance | Compliant | Compliant | Compliant (Pb-free/Green) | Compliant |
Bảo phân biệt quan trọng
- Industrial-extended 0C-to-+105C temperature grade on a 600 MHz e500 silicon (vsMPC8535ECVTAKGA)
- Pb-free/Green variant option for RoHS-strict programs (vsMPC8535EBVTANGA)
- Tape-and-reel packaging option for high-volume SMT lines (vsMPC8535EBVTAULA)
Ghi chú thiết kế
The 783-FCPBGA (29x29 mm) package demands a 4- or 6-layer PCB with 0.4 mm ball pitch and via-in-pad or microvia escape routing. Per NXP hardware-design guidelines for the PowerQUICC III family, allocate a continuous ground plane directly beneath the BGA to control return-current paths for the 600 MHz DDR2 interface. Routed trace length matching within +/-25 mil is required for DDR2 data-byte lanes; NXP publishes reference-length spreadsheets in the hardware-design checklist. Manufacturing yield drops sharply below 4-mil trace/space, so specify 4-mil/4-mil capability at the PCB vendor.
Estimated power dissipation at full 600 MHz e500 operation with active crypto engine ranges 5-8 W. With the FCPBGA's typical theta_JA of 12-15 C/W (4-layer JEDEC test board), junction temperature rise above ambient reaches 60-120 C. For +105C industrial-ambient deployments, de-rate clock frequency or add a small aluminum heatsink bonded with thermal-interface material. Designers should validate thermal envelopes against NXP's PowerQUICC III thermal model and run a computational fluid dynamics (CFD) analysis on the final enclosure geometry.
The MPC8535EBVTAKGA requires multiple power rails: core (1.0-1.2 V), DDR I/O (1.8 V for DDR2), SerDes/PCIe (1.0 V analog plus 1.8-3.3 V I/O), and standard 3.3 V peripherals. Use a multi-phase buck regulator with output accuracy within +/-2 percent to keep DDR2 timing margins intact. Decouple each rail with a 22 uF bulk tantalum, four 10 uF ceramic, and twelve 100 nF X7R high-frequency capacitors placed within 5 mm of the BGA vias. Follow NXP's power-sequencing diagram exactly to avoid latch-up during cold-start.
Thông tin tuân thủ
RoHS and lead-free confirmed by NXP product page and DigiKey/Mouser listings. AEC-Q100 is not applicable - this part is an industrial/embedded MPU, not an automotive-qualified device. Halogen-free status not explicitly stated in the verified web data and is recorded as 'unknown'.