P82B96P - 2-Channel 400kHz I2C Buffer | Texas Instruments
MPN: P82B96P ✓ Hoạt độngP82B96P Tóm tắt
An I2C bus buffer is a signal-conditioning semiconductor that isolates or extends bus nodes, reduces loading, and can translate between logic domains. In the interface hierarchy, the P82B96 belongs to the I2C controller/buffer and extender class, then to bus-interface ICs and interface semiconductors. Its purpose is to improve compatibility among I2C master and slave devices operating across logic levels from 2 V to 15 V.
Key features include two bidirectional channels, a 2 V to 15 V operating power-supply range, and a stated 400 kHz operating frequency. The device supports bidirectional data transfer and can connect buses with different voltage and current levels. The PDIP package is suitable for conventional through-hole assembly and prototyping, while its non-latching design avoids requiring an explicit direction-control signal.
Technically, the P82B96 uses slightly different logic-low voltage levels on the Sx/Sy side to prevent latching in bidirectional operation. The manufacturer states that two or more Sx or Sy I/O nodes must not be connected together on the same node because the design does not support that configuration. Bus capacitance, rise time, pull-up resistance, and logic-level limits must therefore be checked during implementation.
Typical uses include isolating I2C subsystems, connecting devices operating at 2 V through 15 V logic levels, interfacing with SMBus-style systems, and improving electrical loading on longer bus segments. The P82B96 is also appropriate when a standard bus needs an intermediate buffer node rather than a directional translator.
For PCB implementation, preserve the manufacturer-recommended pull-ups on each bus side, keep the buffer close to the bus split, and route each side as a continuous bidirectional node. Do not combine multiple Sx or Sy outputs on one node. Confirm timing, voltage, capacitance, and logic-level compatibility before treating the 400 kHz rating as guaranteed for a particular bus.
This page consolidates manufacturer and distributor information, replacement assessment, timing considerations, and practical design guidance for engineers evaluating the P82B96P.
Bộ thay thế dễ dàng lắp đặt cho P82B96P — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với P82B96P (cùng hình factor và footprint) — khác nhau ở Package, Mounting Type, Number of Channels, Operating Temperature Range, Product Type.
P82B96P
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →P82B96TD
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →P82B96PN
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PCA9557D
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →P82B96P Thông số kỹ thuật
| Product Type | 2-bit bidirectional I2C/SMBus buffer and cable extender |
| Number of Channels | 2 channels |
| Operating Supply Voltage Range | 2 V to 15 V |
| Maximum Stated Operating Frequency | 400 kHz |
| Bus Compatibility | I2C and SMBus |
| Data Direction | Bidirectional |
| Interface Architecture | Non-latching bidirectional bus interface |
| Direction Control Input | None |
| Supported Logic Levels | 2 V to 15 V |
| Sx/Sy Same-Node Connection | Not supported |
| Hộp | 8-pin PDIP |
| Kiểu lắp đặt | Through-hole |
Hướng dẫn cấu hình chân P82B96P 8-pin pdip
Cấu hình chân cho P82B96P (8-pin pdip gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho P82B96P.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
P82B96P phù hợp cho 6 Áp dụngs: Bidirectional I2C Bus Isolation, Mixed-Voltage I2C Interfacing, SMBus-Compatible Buffering, I2C Bus Extension, Legacy-to-Modern Bus Bridging, Noisy or Long I2C Traces.
Bidirectional I2C Bus Isolation
The P82B96P fits between two I2C segments that must exchange SDA and SCL data in both directions without a separate enable or direction-control signal. Its two channels match the two-wire bus, while the verified 2 V to 15 V operating range supports interfaces spanning traditional low-voltage I2C and higher-voltage bus devices. Install pull-ups on both sides, keep each Sx/Sy node isolated from other buffer outputs, and verify that propagation delay and capacitance remain inside the system timing budget at the selected frequency.
Được đề xuất
Mixed-Voltage I2C Interfacing
The P82B96P is appropriate when SDA and SCL devices use logic levels within different parts of the verified 2 V to 15 V range. It creates a non-latching interface between buses with different voltage and current levels rather than applying a fixed one-way translation rule. The engineer must still confirm each side’s input thresholds, output-low behavior, pull-up voltage, bus capacitance, and timing in the complete datasheet. This arrangement is useful for isolating legacy or higher-voltage nodes from a modern low-voltage controller.
Được đề xuất
SMBus-Compatible Buffering
The P82B96P can buffer an SMBus-compatible connection when both SDA-equivalent and SCL-equivalent nodes require bidirectional isolation or different voltage and current domains. The two-channel topology follows the non-latching bus-buffer concept described by the manufacturer, avoiding a separate direction pin. Because SMBus timing and transaction requirements can differ from ordinary I2C, confirm rise and fall times, pull-up values, timeout behavior, and the device’s exact logic thresholds before deployment. The 400 kHz rating should be validated against the assembled bus.
Được đề xuất
I2C Bus Extension
The P82B96P can divide an I2C system into separate buffered nodes, reducing the electrical loading presented when several peripheral branches would otherwise share one long bus. Each buffered channel provides a distinct bidirectional path for SDA and SCL, and the manufacturer identifies the device as a bus extender. Actual extension distance is not fixed by the 2 V to 15 V and 400 kHz ratings; it depends on cable capacitance, pull-up resistance, rise time, noise, and peripheral loading. Measure the final physical bus rather than selecting distance from the frequency rating alone.
Được đề xuất
Legacy-to-Modern Bus Bridging
The P82B96P can bridge two bidirectional two-wire nodes when legacy equipment uses a higher logic voltage and a modern controller uses a lower one. The verified 2 V to 15 V range provides the broad interface envelope, while separate Tx/Rx and Sx/Sy sides allow the level relationship to be evaluated on each channel. This is not a general-purpose protocol translator: clock stretching, arbitration behavior, rise time, and the manufacturer prohibition on joining multiple Sx or Sy nodes must be checked. Bench validation is essential in equipment with undocumented bus behavior.
Được đề xuất
Noisy or Long I2C Traces
The P82B96P can split SDA and SCL into separate buffered nodes when routing through a long PCB or cable run makes loading and signal integrity harder to control. Buffering may help isolate capacitance and noise sources, but it does not replace correct pull-ups, short return paths, or impedance-aware routing. Keep each side’s pull-ups physically close to that side’s devices and use continuous bidirectional nodes. If operation near the stated 400 kHz maximum is required, verify rise time and propagation delay with an oscilloscope under worst-case loading.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho P82B96P — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
The verified data does not identify five independent same-footdrop-in replacements. P82B96 family ordering codes should be checked with TI before substitution, while P82B96DGKR and PCA9557D are not substitutes for an existing P82B96P board despite functional or package-family proximity. For an existing PDIP PCB, retain P82B96P or obtain a manufacturer-confirmed orderable equivalent with the same eight-pin footprint and pinout. For a new board, package choice can be revisited, but electrical timing and logic thresholds remain more important than distributor availability.
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | P82B96P | P82B96 | P82B96PN | PCA9557D |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | PDIP-8 | PDIP-8 | PDIP-8 | PDIP-8 | PDIP-8 |
| Function | 2-bit bidirectional I2C/SMBus buffer | 2-bit bidirectional I2C/SMBus buffer | 2-bit bidirectional I2C/SMBus buffer | 2-bit bidirectional I2C/SMBus buffer | 8-bit I/O expander |
| Channel Count | 2 channels | 2 channels | 2 channels | 2 channels | 8-bit port |
Bảo phân biệt quan trọng
- Purpose-built two-channel bus buffering (vsPCA9557D)
- Broad verified operating range (vsPCA9557D)
- Non-latching bidirectional operation (vsPCA9557D)
Ghi chú thiết kế
Do not connect two or more Sx or Sy I/O nodes to the same physical node. The TI datasheet explicitly states that the P82B96 does not support this configuration. Treat every Sx/Sy channel as a separate bidirectional interface between its corresponding Tx/Rx and bus side. This prevents accidental contention and preserves the non-latching operation that distinguishes the device from a conventional directional level translator.
Validate the complete two-wire bus at the intended 400 kHz operating point. Check pull-up resistance against each side’s capacitance, verify SDA and SCL rise and fall times, and include buffer propagation delay in the timing budget. The verified manufacturer excerpt cites a 425 ns worst-case I2C rise-time allowance. A 400 kHz device rating does not guarantee a particular system result when cable capacitance, weak pull-ups, noise, or slow peripheral inputs are present.
Place pull-up resistors on the bus side they serve and keep each side electrically continuous; do not route SDA or SCL through uncontrolled junctions. Preserve the 8-pin PDIP footprint and verify orientation from the official pin table because the supplied verified excerpts do not include the complete pinout. Provide a direct ground return and keep the buffer near the bus split so stub branches remain short and their added capacitance does not degrade rise time.
Thông tin tuân thủ
The supplied verified excerpts do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is marked not applicable because the product is an interface buffer rather than an automotive-qualified device, but no automotive qualification claim was provided.