PCM1716E/2K - 24-Bit 96kHz Stereo DAC | Texas Instruments
MPN: PCM1716E/2K ✓ Hoạt độngPCM1716E/2K Tóm tắt
A digital-to-analog converter, or DAC, is an integrated circuit that reconstructs continuous analog voltage signals from digital audio samples. Within the signal-chain hierarchy, the PCM1716E belongs to the audio DAC class, connects a digital audio source such as a USB interface, decoder, or digital mixer to an analog output stage, and ultimately feeds amplifiers, headphone drivers, or line-level circuitry. This conversion stage determines the fidelity of the analog waveform presented to the downstream audio hardware.
Key characteristics include a 24-bit resolution, a maximum stated sampling rate of 96 kHz, stereo output, CMOS construction, and an I2S serial interface. The I2S interface reduces the number of signal lines required when routing digital audio between devices, while the two-channel architecture supports conventional left-right stereo playback. The 28-SSOP package keeps the converter compact enough for consumer, multimedia, and professional audio boards.
The PCM1716E/2K uses delta-sigma conversion technology, a CMOS-based architecture commonly used in modern digital audio converters. Delta-sigma converters shape quantization noise into the out-of-band region so that a digital reconstruction filter can remove it before the analog signal reaches the output stage. The converter accepts PCM-format digital audio and provides analog stereo outputs suitable for downstream amplification and filtering.
Typical applications include CD and DVD player digital audio sections, home-theater and multimedia receivers, active speakers, digital mixing consoles, USB audio interfaces, consumer audio appliances, and sound-card designs. Its 96 kHz capability also suits professional and broadcast equipment operating at higher-than-CD sample rates when the associated system clock and reconstruction filtering are designed accordingly.
Designers should follow the pin-description table and typical application circuits in the manufacturer datasheet when assigning the I2S interface, analog output filters, supply rails, and bypass capacitors. Decoupling capacitors should be placed close to the supply pins, and the analog output network must be matched to the intended line or headphone drive stage. Verify output compliance, clock requirements, and supported data formats for the exact system configuration before layout release.
This page consolidates the device specifications, ordering details, sourcing information, and same-footprint family alternatives into a single engineering reference. It also adds application guidance, comparison parameters, and design notes that help shorten evaluation time while keeping the manufacturer datasheet as the controlling technical authority.
Bộ thay thế dễ dàng lắp đặt cho PCM1716E/2K — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PCM1716E/2K (cùng hình factor và footprint) — khác nhau ở Package.
PCM1716E/2KG4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PCM1716EG4
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PCM1716E
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PCM1716E/2K Tỷ lệ tối đa & tính chất điện
| Product Type | Stereo audio digital-to-analog converter |
| Độ phân giải | 24 bit |
| Maximum Sampling Rate | 96 kHz |
| Output Channels | 2 channels (stereo) |
| Conversion Architecture | CMOS delta-sigma |
| Digital Audio Interface | I2S |
| Hộp | 28-SSOP |
| Package Body Width | 5.30 mm (0.209 inch) |
| Package Pin Count | 28 pins |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân PCM1716E/2K 28 pins
Cấu hình chân cho PCM1716E/2K (28 pins gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho PCM1716E/2K.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PCM1716E/2K phù hợp cho 6 Áp dụngs: CD and DVD Player Audio Output, Home-Theater and Multimedia Receiver, USB Audio Interface, Digital Mixing Console and Active Speaker, Digital Audio Acquisition and Processing, Consumer Audio and Sound-Card Products.
CD and DVD Player Audio Output
The PCM1716E/2K fits the final digital-to-analog stage of a CD or DVD player because it accepts stereo I2S data, converts 24-bit samples at rates up to 96 kHz, and drives two analog output channels. The converter is positioned after the transport or decoder and before the line-level amplifier. Its 28-SSOP package keeps the analog section compact, while the 96 kHz capability provides headroom for higher-rate source material. Design the reconstruction and anti-imaging filters around the analog output specification in the Texas Instruments PCM1716E datasheet, and decouple the supply pins locally to prevent converter switching energy from coupling into the output stage.
Được đề xuất
Home-Theater and Multimedia Receiver
PCM1716E/2K is suitable for a home-theater receiver or multimedia amplifier that accepts digital audio from a decoder and produces stereo analog signals for power amplification. Its I2S interface supports a conventional digital-audio connection, and the 24-bit, 96 kHz conversion capability accommodates 48 kHz, 88.2 kHz, and 96 kHz streams when the receiver accepts them. The device should follow the decoder rather than sit at the speaker output, leaving volume control and power amplification in their dedicated stages. Use the manufacturer typical application circuits to establish filtering and grounding, and keep the analog outputs away from switching regulators and high-current amplifier inputs.
Được đề xuất
USB Audio Interface
The PCM1716E/2K can provide the stereo analog output stage of a USB audio interface when a USB controller or dedicated audio interface IC delivers I2S data. The converter handles 24-bit digital samples at up to 96 kHz, making it appropriate for playback designs that must support high-resolution music. Place the DAC close to the analog output connector or balanced line driver while keeping the digital interface away from sensitive analog nodes. Clock jitter, ground separation, and output-filter selection influence the final audible and measured performance, so these items should be designed with the datasheet timing and application guidance rather than copied from a generic codec layout.
Được đề xuất
Digital Mixing Console and Active Speaker
PCM1716E/2K is applicable to digital mixing equipment and active-speaker control boards that require a compact two-channel DAC for monitoring or auxiliary output. Its I2S input can receive stereo PCM audio from a mixer or DSP, while the analog outputs feed line amplifiers or volume-controlled speaker stages. The 24-bit resolution and 96 kHz maximum rate align with professional digital-audio workflows, although the complete system must support the selected rate. Keep the converter's analog return path within the manufacturer's grounding guidance, and design the output filters for the load presented by the following amplifier stage to avoid degrading the available signal headroom.
Được đề xuất
Digital Audio Acquisition and Processing
PCM1716E/2K is suitable for the playback and monitoring side of a digital audio acquisition system where captured or processed PCM data must be converted for analog review. Its stereo I2S interface accepts two digital channels, and the 24-bit, 96 kHz specification provides a suitable target format for high-resolution processing chains. The converter may sit after a DSP, editor, or interface controller and before calibrated line outputs or measurement equipment. For instrumentation-grade results, evaluate the analog output noise and distortion against the required accuracy, isolate analog and digital return currents, and use the manufacturer reference configuration for supply bypassing and output filtering.
Được đề xuất
Consumer Audio and Sound-Card Products
PCM1716E/2K supports compact consumer audio products and sound-card designs that need a two-channel DAC without a large converter footprint. The 28-SSOP package provides a manageable land pattern, while the 24-bit resolution and 96 kHz sampling capability cover CD-quality playback and higher-rate sources. Position the device near the analog output stage and route its digital interface away from the output connector and power stages. Analog output compliance, filter component selection, and channel-balance performance remain board-level design considerations, so prototype the complete output network and verify it against the manufacturer typical application circuit before production release.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PCM1716E/2K — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PCM1716E/2KG4 | PCM1716EG4 | PCM1716E |
|---|---|---|---|---|
| Package | 28-SSOP | 28-SSOP - same footprint | 28-SSOP - same footprint | 28-SSOP - same footprint |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Converter Function | 24-bit stereo audio DAC | 24-bit stereo audio DAC | 24-bit stereo audio DAC | 24-bit stereo audio DAC |
| Maximum Sampling Rate | 96 kHz | 96 kHz | 96 kHz | 96 kHz |
| Digital Audio Interface | I2S | I2S | I2S | I2S |
| Conversion Architecture | CMOS delta-sigma | CMOS delta-sigma | CMOS delta-sigma | CMOS delta-sigma |
| Output Channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Ordering Code | PCM1716E/2K | G4 suffix variant | EG4 ordering code | Base ordering code |
Bảo phân biệt quan trọng
- Maintains the exact PCM1716 audio conversion positioning (vsPCM1716E/2KG4)
- Supports a directly comparable 96 kHz stereo output path (vsPCM1716EG4)
- Retains the 28-SSOP footprint used by the PCM1716 family (vsPCM1716E)
Ghi chú thiết kế
Route the I2S data, bit-clock, and master-clock signals as a compact digital group, and keep them away from the analog output traces. Place the device close to the output connector or line driver so the analog path remains short. Maintain a continuous ground reference beneath the converter and return analog output currents directly to the device ground region without passing through digital return paths.
Follow the manufacturer power-supply configuration and place the required bypass capacitors at the device pins with very short ground connections. The analog and digital sections may share a supply source, but the routing should prevent converter current transients from appearing across the analog output reference. Verify voltage tolerance and decoupling values against the released Texas Instruments PCM1716E datasheet before layout release.
Use the manufacturer timing diagrams to establish the relationships among the bit clock, master clock, and I2S data. Avoid long parallel digital traces and unnecessary vias near the clock inputs because they can increase timing uncertainty and radiated noise. The analog reconstruction network should be calculated for the intended output load, and its grounding should be evaluated together with the analog output compliance of the device.
Do not substitute a similar PCM1716 ordering code without comparing the full suffix and qualification markings. Confirm the supported sample rate, data format, master-clock requirement, supply level, temperature grade, and output configuration against the exact device datasheet. A suffix change can appear minor on a BOM while affecting purchasing traceability, environmental documentation, or the permitted package variant.
Thông tin tuân thủ
The G4 ordering suffix appears in the same-family cross-reference results, but explicit RoHS, REACH, halogen-free, and conflict-minerals declarations were not identified. Confirm current compliance documentation with the manufacturer or the supplier handling the purchase.