PIC16C710-20E/SS - 8-Bit 20MHz OTP MCU with ADC | Microchip
MPN: PIC16C710-20E/SS ✓ Hoạt độngPIC16C710-20E/SS Tóm tắt
A microcontroller (MCU) is a single integrated circuit that contains a processor core, program memory, working RAM, and multiple peripherals such as timers, communication interfaces, and analog-to-digital converters. Microcontrollers sit at the heart of embedded systems, executing firmware to control sensors, actuators, displays, and communication links. Within the broader semiconductor taxonomy, an MCU belongs to the logic/Integrated Circuits > Microcontrollers category, and more specifically to the PIC mid-range family descended from Microchip's original Harvard-architecture PIC design. The PIC16C71X series adds on-chip ADC, making it suitable for mixed-signal embedded designs where analog sensing must coexist with digital control logic.
Key features of the PIC16C710 include 36-byte general-purpose RAM, 64-byte EEPROM data memory (note: this part is OTP program + no separate EEPROM, only data EEPROM emulation in some variants), four 8-bit ADC channels with selectable reference, internal and external interrupt sources, and a programmable code-protection mechanism. The wide 2.5 V to 6.0 V operating voltage range supports both 3.3 V and 5 V system designs, and the 20 MHz clock rate provides 5 MIPS of processing throughput for real-time control loops.
Architecturally, the PIC16C710 uses a 14-bit instruction word with single-cycle execution except for branch instructions, which take two cycles. The Harvard architecture separates program and data memory buses, eliminating the fetch-decode bottleneck of von Neumann designs. The 8-bit ALU and 8-bit working register (W) handle arithmetic and logic operations, while 36 general-purpose RAM bytes serve as data storage with direct and indirect addressing modes.
Typical applications include automotive sensor signal conditioning, industrial control with analog inputs, appliance controls, battery chargers, and low-cost consumer devices. The combination of integrated ADC, ample I/O, and OTP programmability makes it well-suited for production-grade designs where code stability and small footprint are priorities. Design consideration: the OTP nature of program memory means firmware must be fully validated before production programming—once programmed, the code cannot be changed. For prototyping or field-upgradable designs, Flash-based PIC16F equivalents are typically preferred.
Bộ thay thế dễ dàng lắp đặt cho PIC16C710-20E/SS — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC16C710-20E/SS (cùng hình factor và footprint) — khác nhau ở Timers, Program Memory Size, Operating Temperature Range, Package, Core Architecture.
PIC16C710-20I/SS
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC16C710-20/SS
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC16C710-04/SS
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC16C711-20E/SS
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC16C710-20E/P
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC16F710-I/SS
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC16C710-20E/SS Tỷ lệ tối đa & tính chất điện
| Product Family | PIC 16C |
| Core Architecture | 8-bit RISC (PIC mid-range) |
| Tần số xung maksimum | 20 MHz |
| Instruction Cycle Time | 200 ns |
| Program Memory Type | OTP (One-Time Programmable) |
| Program Memory Size | 896 B (512 × 14-bit) |
| EEPROM | None (data EEPROM emulation in some variants) |
| I/O Pins | 13 |
| ADC Channels | 4 × 8-bit |
| Timers | Timer0 (8-bit with 8-bit prescaler) |
| Watchdog Timer | Yes |
| Brown-Out Reset (BOR) | Yes |
| Hộp | 20-SSOP |
| Số chân | 20 |
| Terminal Form | Gull Wing |
| Temperature Grade | Automotive (-40 °C to +125 °C) |
| Kiểu lắp đặt | Surface Mount |
Cấu hình chân PIC16C710-20E/SS
| Chân 1 | RA2/AN2 — Bidirectional I/O pin / analog channel 2 |
| Chân 2 | RA3/AN3/VREF — Bidirectional I/O / analog channel 3 / ADC reference voltage |
| Chân 3 | RA4/T0CKI — Bidirectional I/O / Timer0 clock input |
| Chân 4 | RA5/MCLR/VPP — Bidirectional I/O / Master Clear (reset) input / programming voltage |
| Chân 5 | VSS — Ground reference |
| Chân 6 | RB0/INT — Bidirectional I/O / external interrupt input |
| Chân 7 | RB1 — Bidirectional I/O |
| Chân 8 | RB2 — Bidirectional I/O |
| Chân 9 | RB3 — Bidirectional I/O |
| Chân 10 | RB4 — Bidirectional I/O |
| Chân 11 | RB5 — Bidirectional I/O |
| Chân 12 | RB6 — Bidirectional I/O |
| Chân 13 | RB7 — Bidirectional I/O |
| Chân 14 | VDD — Positive supply voltage |
| Chân 15 | OSC2/CLKOUT — Oscillator crystal output / clock output |
| Chân 16 | OSC1/CLKIN — Oscillator crystal input / external clock input |
| Chân 17 | RA0/AN0 — Bidirectional I/O / analog channel 0 |
| Chân 18 | RA1/AN1 — Bidirectional I/O / analog channel 1 |
| Chân 19 | NC — Not connected (per datasheet) |
| Chân 20 | NC — Not connected (per datasheet) |
Ứng dụng tiêu biểu
PIC16C710-20E/SS phù hợp cho 6 Áp dụngs: Automotive Sensor Signal Conditioning, Industrial Process Control, White Goods and Appliance Control, Battery-Powered Portable Instruments, Smart Home Sensor Hubs, Consumer Electronics Sub-system Controller.
Automotive Sensor Signal Conditioning
The PIC16C710-20E/SS fits automotive sensor signal conditioning with its 4-channel 8-bit ADC and automotive-grade -40°C to +125°C operating range. It samples analog signals from temperature, pressure, or position sensors and converts them to digital values for system-level control. The 20MHz/5MIPS throughput is sufficient for periodic sensor reads at sub-millisecond cadence. Placed on a small PCB near the sensor harness, it provides local digitization and CAN/LIN-ready digital outputs while meeting AEC-Q100-style thermal endurance. Unlike higher-pin-count PICs, the 20-SSOP footprint keeps the BOM compact for under-hood modules.
Được đề xuất
Industrial Process Control
Industrial process control applications benefit from the PIC16C710-20E/SS's integrated ADC, watchdog timer, and brown-out reset features that provide robust unattended operation in factory environments. The device monitors analog process variables such as tank level, flow rate, or pressure via its 4 ADC channels and drives digital outputs for relays, valves, or indicators. Its 36-byte RAM supports modest control loops while the OTP memory locks firmware to prevent field tampering. Compared with discrete analog circuitry, the integrated ADC and 5MIPS CPU reduce board area and improve noise immunity on long analog runs.
Được đề xuất
White Goods and Appliance Control
White goods such as washing machines, dishwashers, and microwave ovens use the PIC16C710-20E/SS for front-panel control, sensor acquisition, and motor/relay timing. The 13 GPIO pins drive multiplexed LED or LCD displays, keypad scanning, and discrete actuator outputs while the 4-channel ADC reads temperature, water level, or humidity sensors. The automotive temperature grade (E suffix) supports the high thermal environment of appliance cabinets. Compared with mechanical timers, MCU-based control enables energy-efficient variable-speed operation and adaptive cycles that improve user satisfaction.
Được đề xuất
Battery-Powered Portable Instruments
Battery-powered portable instruments leverage the PIC16C710-20E/SS's wide 2.5V to 6.0V operating range to run from a single Li-ion cell (3.0-4.2V) or two AA cells (3.0V). The integrated ADC digitizes sensor data and the 5MIPS throughput handles user interface and data logging. Brown-out reset protects against low-battery corruption of volatile state. The 20-SSOP package consumes minimal PCB area, important for handheld form factors. The PIC16C710-04/SS variant at 4MHz further extends battery life for applications that can tolerate reduced throughput.
Được đề xuất
Smart Home Sensor Hubs
Smart home sensor hubs use the PIC16C710-20E/SS to aggregate analog signals from multiple sensors (motion, light, temperature, gas) and forward processed data to a higher-level gateway. The 4-channel 8-bit ADC reads analog sensors directly while the GPIO pins interface to digital sensors or drive status LEDs. The OTP program memory locks production firmware to prevent unauthorized modification in deployed units. Compared with Wi-Fi/BLE SoCs, the bare PIC16C710 reduces BOM cost and power consumption in battery or energy-harvested nodes that only need local analog conditioning.
Được đề xuất
Consumer Electronics Sub-system Controller
Consumer electronics sub-systems such as remote controls, toys, and educational kits use the PIC16C710-20E/SS as a cost-effective local controller. The 13 GPIO pins drive LEDs, keypads, piezo buzzers, and IR transmitters while the ADC reads analog joysticks or battery voltage. The 20 MHz clock and 5 MIPS throughput support basic pulse-width modulation for LED dimming or motor speed control. Compared with multi-core SoCs, the PIC16C710 minimizes per-unit cost in consumer goods where the MCU is a small fraction of total BOM.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC16C710-20E/SS — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC16C710-20I/SS | PIC16C710-20/SS | PIC16C710-04/SS | PIC16C711-20E/SS | PIC16F710-I/SS |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-SSOP | 20-SSOP - same | 20-SSOP - same | 20-SSOP - same | 20-SSOP - same | 20-SSOP - same |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 4 MHz (-80%) | 20 MHz | 20 MHz |
| Program Memory Type | OTP (896 B) | OTP (896 B) | OTP (896 B) | OTP (896 B) | OTP (1 KB, +14%) | Flash (field-upgradeable) |
| ADC Resolution | 8-bit | 8-bit | 8-bit | 8-bit | 14-bit (+75% resolution) | 8-bit |
| ADC Channels | 4 | 4 | 4 | 4 | 4 | 4 |
| Temperature Grade | Automotive (-40 to +125 °C) | Industrial (-40 to +85 °C) | Commercial (0 to +70 °C) | Automotive (-40 to +125 °C) | Automotive (-40 to +125 °C) | Industrial (-40 to +85 °C) |
| I/O Pins | 13 | 13 | 13 | 13 | 13 | 13 |
Bảo phân biệt quan trọng
- Automotive temperature grade in compact SSOP-20 footprint (vsPIC16C710-20I/SS)
- Drop-in SSOP-20 upgrade path to 14-bit ADC precision (vsPIC16C711-20E/SS)
- OTP cost optimization for high-volume production (vsPIC16F710-I/SS)
Ghi chú thiết kế
Estimated: at VDD=5V and 20MHz with all peripherals active, the PIC16C710-20E/SS typical IDD is in the 5-15mA range. For battery-powered designs, switch to the 4MHz grade (PIC16C710-04/SS) or use sleep mode aggressively. Place a 100nF decoupling capacitor within 5mm of the VDD pin and a 10uF bulk capacitor on the supply rail. Brown-out reset (BOR) is enabled by configuration bits—keep it enabled to prevent code corruption during supply droops.
The OTP program memory cannot be erased or rewritten after programming, unlike Flash PIC16F variants. Validate firmware on a PIC16F710-I/SS development platform before committing to OTP production programming. The MCLR/VPP pin (pin 4) is shared with RA5—ensure the MCLR circuit does not conflict with RA5 digital I/O usage if both functions are needed. The ADC requires a stable reference voltage on RA3/VREF; noise on this pin degrades conversion accuracy by several LSBs.
Route the analog inputs (AN0-AN3, RA0-RA3) away from digital switching traces to minimize ADC coupling noise. Use a ground plane under the SSOP-20 footprint to provide low-impedance return paths. Keep the OSC1/OSC2 crystal traces short and symmetric, surrounded by ground pour, to reduce EMI radiation and clock jitter. Place a 1MΩ parallel resistor across OSC1/OSC2 if using a crystal, or use a ceramic resonator with internal capacitors for cost-sensitive designs.
Thông tin tuân thủ
RoHS and REACH compliance per Microchip product environmental documentation. The automotive temperature grade (E suffix, –40 °C to +125 °C) supports automotive-style thermal endurance but is not formally AEC-Q100 qualified per the data provided. Engineers integrating into AEC-Q100 systems should verify the latest Microchip qualification status.
