PIC16F1827-E/P - 8-Bit 32MHz XLP Flash MCU | Microchip
MPN: PIC16F1827-E/P ✓ Hoạt độngPIC16F1827-E/P Tóm tắt
A flash microcontroller is a type of microcontroller that stores its program in electrically rewritable Flash memory rather than one-time-programmable or mask-programmed memory. PIC16 devices combine an 8-bit RISC core, digital I/O, timers, serial interfaces, and analog peripherals in a single integrated circuit. The PIC16F1827 family is also associated with PIC XLP technology and mTouch capacitive-sensing support, allowing low-power and touch-oriented designs to be implemented with relatively few external components.
The supplied data identifies 7KB of Flash memory, organized as 4K by 14 bits, 384 bytes of SRAM, 12 I/O ports, and an internal oscillator rated to 32MHz in the distributor descriptions. It also identifies an 18-PDIP package. The E/P package code denotes the manufacturer packaging and temperature designation family, while the exact operating-temperature limits, supply-voltage range, ADC details, timer resources, and pin-level electrical characteristics require confirmation from the manufacturer datasheet.
PIC16F1827-E/P can be used as a low-cost embedded controller in consumer products, industrial instruments, environmental monitors, touch interfaces, small motor-control boards, and communication-enabled sensor nodes. Its Flash program memory supports field reprogramming through the supported programming interfaces, while the 18-pin DIP package simplifies prototyping, breadboarding, and through-hole assembly.
Designers should use the official PIC16F1826/27 datasheet for the exact pinout, programming requirements, oscillator options, peripheral configuration, electrical limits, and package drawings. A PIC16F1827-E/P board should provide appropriate decoupling, a valid programming connection, and a power source that satisfies the selected PIC16F1827 variant. Firmware and development-tool compatibility should also be verified before production release.
This product page consolidates the verified manufacturer and distributor identity, memory, speed, package, pricing, and comparison information. It also distinguishes verified facts from parameters that still need datasheet confirmation, helping engineers make a more reliable procurement and design decision.
Bộ thay thế dễ dàng lắp đặt cho PIC16F1827-E/P — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC16F1827-E/P (cùng hình factor và footprint) — khác nhau ở Package, Internal Oscillator, Mounting Type, RoHS Status, ADC.
PIC16F1827-I/P
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC16F1826-E/P
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC16F1826-I/P
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC16F1827-E/P Tỷ lệ tối đa & tính chất điện
| Product Type | 8-bit Flash Microcontroller |
| Manufacturer | Microchip Technology |
| MPN | PIC16F1827-E/P |
| Architecture | PIC16 8-bit RISC |
| Tần số xung maksimum | 32 MHz |
| Program Memory | 7 KB Flash (4K x 14) |
| Data Memory | 384 bytes |
| I/O Ports | 12 |
| Hộp | 18-PDIP |
| Kiểu lắp đặt | Through-hole |
| Technology | PIC XLP |
| Programming Memory | Flash |
| Programming Method | In-Circuit Serial Programming (ICSP) |
| Internal Oscillator | Yes, 32 MHz maximum stated |
| Trạng thái vòng đời | Active; manufacturer status: In Production |
| Pinout | 18-pin through-hole DIP; consult manufacturer datasheet |
| Trạng thái RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
Hướng dẫn cấu hình chân PIC16F1827-E/P 18-pdip
Cấu hình chân cho PIC16F1827-E/P (18-pdip gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho PIC16F1827-E/P.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PIC16F1827-E/P phù hợp cho 7 Áp dụngs: Embedded Sensor Node, Capacitive Touch Interface, Industrial Control Board, Consumer Appliance Controller, Data Acquisition Module, Educational Electronics Platform, Battery-Powered Monitoring Device.
Embedded Sensor Node
PIC16F1827-E/P fits a compact sensor node where an 8-bit MCU must read inputs, run control logic, and manage low-power states. Its verified 32MHz clock capability and 384 bytes of SRAM provide a practical control platform for periodic sampling, digital filtering, and local decisions. The 18-PDIP package also simplifies prototype assembly and replacement. Confirm the exact ADC, timer, and sleep-current specifications in the official datasheet before defining battery life.
Được đề xuất
Capacitive Touch Interface
The PIC XLP and mTouch positioning of the PIC16F1827 family makes PIC16F1827-E/P a candidate for simple capacitive-touch user interfaces. An 18-pin through-hole controller can evaluate touch inputs, drive indicator LEDs, and implement debouncing or product-specific behavior in firmware. Electrode geometry, acquisition timing, noise immunity, and channel availability are design-critical, so validate them against the exact PIC16F1827-E/P datasheet and a physical prototype.
Được đề xuất
Industrial Control Board
PIC16F1827-E/P can serve as the central controller of a small industrial control board when the design needs Flash programmability, 12 I/O ports, and a 32MHz-class MCU. Possible tasks include supervisory logic, relay control, status monitoring, and communication bridging. Industrial deployment still requires checking the exact temperature grade, supply limits, isolation strategy, ESD requirements, and any required regulatory approvals; those values are not supplied here.
Được đề xuất
Consumer Appliance Controller
The PIC16F1827-E/P is suitable for a compact appliance controller that coordinates button inputs, indicators, timers, and simple actuators. Its Flash memory permits field updates, while the through-hole DIP package simplifies assembly in low-volume products and test fixtures. Firmware should include debounce, watchdog and brownout strategies, safe actuator shutdown, and fault reporting. Exact I/O mappings and peripheral limits must be confirmed before release.
Được đề xuất
Data Acquisition Module
PIC16F1827-E/P can be evaluated for a small data-acquisition module that samples analog or digital inputs and transfers summarized results to a host. The MCU's 32MHz maximum stated clock and 384 bytes of SRAM support timing and buffering tasks, while Flash stores configuration and firmware. The supplied data does not specify ADC resolution, sample rate, input count, or serial interface details, so these must be obtained from the datasheet before claiming suitability.
Được đề xuất
Educational Electronics Platform
PIC16F1827-E/P is well suited to educational and maker platforms because it combines a familiar PIC16 programming model with Flash memory, 12 I/O ports, and a through-hole DIP package. Students can build LED indicators, button controls, timers, sensor interfaces, and communication experiments without relying on a fine-pitch surface-mount footprint. The package simplifies breadboard prototyping, while the datasheet remains the authority for programming voltage, pin functions, and peripheral configuration.
Được đề xuất
Battery-Powered Monitoring Device
PIC16F1827-E/P may be used in a battery-powered monitoring device when firmware can exploit the PIC16 XLP feature set and the device operates within its verified voltage and temperature limits. Typical functions include wake-up timing, sensor reading, threshold comparison, and short data transmissions. The supplied data does not provide exact sleep current, active current, or wake-up timing, so battery-life calculations must remain provisional until those datasheet values are available.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC16F1827-E/P — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC16F1827-I/P | PIC16F1826-E/P | PIC16F1826-I/P |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 18-PDIP | 18-PDIP | 18-PDIP | 18-PDIP |
Bảo phân biệt quan trọng
- Verified 18-PDIP through-hole package (vsPIC16F1826-E/P)
- 7KB Flash and 384-byte RAM in the verified target specification (vsPIC16F1827-I/P)
- 32MHz maximum clock stated for the target (vsPIC16F1826-E/P)
Ghi chú thiết kế
Estimated power budgeting should begin only after the exact PIC16F1827-E/P operating-current and voltage figures are confirmed from the official datasheet. Estimated: Pdevice = VDD × Iactive plus PIO, where Iactive and PIO are taken from the selected operating mode and I/O loading. Do not use the $2.9479 distributor price or the 32MHz headline specification as a substitute for electrical data; validate startup, brownout, sleep, and I/O current in the intended configuration.
Place the device-specific decoupling capacitor close to VDD and VSS pins according to the manufacturer recommended layout. The verified data confirms an 18-PDIP package but does not provide the pin names or capacitor value, so do not assign a capacitor value or connection from generic assumptions. In a through-hole prototype, minimize long power-loop traces, provide a clean ground return, and leave the programming connector accessible.
The most important design risk is treating related PIC16 order codes as automatically interchangeable. PIC16F1827-I/P, PIC16F1826-E/P, and PIC16F1826-I/P appear in the cross-reference results, but the supplied data does not establish identical memory, peripherals, temperature grades, or pin compatibility. Before substitution, compare the official datasheets, package drawings, programming configuration words, electrical limits, and device identifier.
Thông tin tuân thủ
No verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was included in the supplied manufacturer or distributor data. Compliance fields remain unknown rather than inferred.
