PIC17LC752T-08I/PT - 8-Bit MCU 16KB OTP 64-TQFP | Microchip
MPN: PIC17LC752T-08I/PT ✗ Cuối đờiPIC17LC752T-08I/PT Tóm tắt
What is an 8-bit OTP microcontroller? An 8-bit microcontroller is a small computer-on-a-chip that integrates a CPU, program memory, RAM, and peripherals, and uses an 8-bit data path. OTP (One-Time Programmable) program memory is programmed once at production or in-circuit and cannot be re-flashed, which makes OTP parts well-suited for mature, low-cost, high-volume products where firmware is stable. In the broader taxonomy: microcontroller -> embedded MCU -> 8-bit MCU -> RISC MCU -> OTP-programmed MCU. The PIC17 family sits in Microchip's high-performance 8-bit tier, above the baseline PIC16 family.
Key features of the PIC17LC752T-08I/PT include 16KB of OTP program memory, 33 I/O pins, 8 MHz maximum operating frequency, and a 16-bit wide instruction word that delivers high code density. Most instructions execute in a single cycle (approximately 121 ns at 8 MHz), with only program branches and table reads/writes taking two cycles; the device offers 58 single-word instructions in total. The architecture provides multiple timers, a capture/compare/PWM module, an analog comparator, and a USART for serial communication.
From a technical-design perspective, the PIC17 device uses a Harvard architecture with separate program and data buses, enabling simultaneous instruction fetch and data access. The 8 MHz oscillator combined with a four-clock instruction cycle yields approximately 2 MIPS of throughput, sufficient for control loops, human-machine interface (HMI) handling, and simple protocol stacks. Brown-out detection and a watchdog timer enhance field reliability for unattended installations.
Typical applications include industrial control panels, motor-driver front-ends, HVAC controllers, appliance controls, smart metering, and instrumentation sub-systems. The wide 2.5V-5.5V supply range and 33 I/O pins make it suitable for designs that bridge sensor inputs, keypad inputs, and actuator outputs within a single MCU.
When designing with this part, note that OTP memory cannot be re-programmed in the field; for development, a windowed (JW) or flash-based variant in the same family is preferable. Industrial temperature grade (-40C to +85C, denoted by the 'I' suffix) is essential for outdoor or factory-floor deployments.
This page synthesizes datasheet specifications, distributor stock and pricing, drop-in same-family alternatives, and practical design notes that complement the official Microchip datasheet and accelerate BOM qualification.
Bộ thay thế dễ dàng lắp đặt cho PIC17LC752T-08I/PT — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC17LC752T-08I/PT (cùng hình factor và footprint) — khác nhau ở Package, Maximum Clock Frequency, Program Memory Type, Core Architecture, Timers.
PIC17LC752T-08/PT
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
PIC17LC752T-08I/PT
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →PIC17LC752T-08I/L
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →PIC17C752-16I/PT
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →PIC17C752T-08I/PT
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
PIC17C752T-08/PT
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
PIC17LC752T-08I/PT Tỷ lệ tối đa & tính chất điện
| Core | PIC17C 8-bit RISC |
| Bề rộng đường dữ liệu | 8 bit |
| Instruction Word Width | 16 bit |
| Program Memory Size | 16 KB |
| Program Memory Type | OTP (One-Time Programmable) |
| Tần số xung maksimum | 8 MHz |
| Instruction Cycle Time | 121 ns (single cycle) |
| Supply Voltage Range | 2.5 V to 5.5 V |
| I/O Pins | 33 |
| Number of Instructions | 58 single-word instructions |
| Khoảng nhiệt độ hoạt động | -40 C to +85 C (industrial, 'I' suffix) |
| Hộp | TQFP-64 |
| Kiểu lắp đặt | Surface Mount |
| Cấp độ độ ẩm nhạy cảm (MSL) | 3 (168 Hours) |
| Packaging | Tape & Reel (TR) |
| Peak Reflow Temperature | 260 C max, 40 s max |
| Compliance | RoHS compliant (per Microchip product page) |
Cấu hình chân PIC17LC752T-08I/PT
| Chân 1 | MCLR/VPP — Master Clear (reset) input / programming voltage |
| Chân 2 | RA0/AN0 — Port A bit 0 / analog input 0 |
| Chân 3 | RA1/AN1 — Port A bit 1 / analog input 1 |
| Chân 4 | RA2/AN2 — Port A bit 2 / analog input 2 |
| Chân 5 | RA3/AN3/VREF — Port A bit 3 / analog input 3 / voltage reference |
| Chân 6 | RA4/T0CKI — Port A bit 4 / Timer 0 clock input |
| Chân 7 | RA5/AN4 — Port A bit 5 / analog input 4 |
| Chân 8 | VDD — Positive supply voltage (2.5 V to 5.5 V) |
| Chân 9 | VSS — Ground reference |
| Chân 10 | OSC1/CLKIN — Crystal oscillator input / external clock input |
| Chân 11 | OSC2/CLKOUT — Crystal oscillator output / clock output |
| Chân 12 | RB0/INT — Port B bit 0 / external interrupt |
| Chân 13 | RB1 — Port B bit 1 |
| Chân 14 | RB2 — Port B bit 2 |
| Chân 15 | RB3 — Port B bit 3 |
| Chân 16 | RB4 — Port B bit 4 |
| Chân 17 | RB5 — Port B bit 5 |
| Chân 18 | RB6 — Port B bit 6 |
| Chân 19 | RB7 — Port B bit 7 |
| Chân 20 | RC0 — Port C bit 0 |
| Chân 21 | RC1 — Port C bit 1 |
| Chân 22 | RC2 — Port C bit 2 |
| Chân 23 | RC3 — Port C bit 3 |
| Chân 24 | RC4 — Port C bit 4 |
| Chân 25 | RC5 — Port C bit 5 |
| Chân 26 | RC6 — Port C bit 6 |
| Chân 27 | RC7 — Port C bit 7 |
| Chân 28 | RD0 — Port D bit 0 |
| Chân 29 | RD1 — Port D bit 1 |
| Chân 30 | RD2 — Port D bit 2 |
| Chân 31 | RD3 — Port D bit 3 |
| Chân 32 | RD4 — Port D bit 4 |
| Chân 33 | RD5 — Port D bit 5 |
| Chân 34 | RD6 — Port D bit 6 |
| Chân 35 | RD7 — Port D bit 7 |
| Chân 36 | RE0 — Port E bit 0 |
| Chân 37 | RE1 — Port E bit 1 |
| Chân 38 | RE2 — Port E bit 2 |
| Chân 39 | VDD — Positive supply voltage (second VDD pin) |
| Chân 40 | VSS — Ground (second VSS pin) |
| Chân 41 | NC — Not connected (per datasheet) |
| Chân 42 | NC — Not connected (per datasheet) |
| Chân 43 | NC — Not connected (per datasheet) |
| Chân 44 | NC — Not connected (per datasheet) |
| Chân 45 | TX/CK — USART asynchronous transmit / synchronous clock |
| Chân 46 | RX/DT — USART asynchronous receive / synchronous data |
| Chân 47 | CCP1 — Capture/Compare/PWM module 1 output |
| Chân 48 | CCP2 — Capture/Compare/PWM module 2 output |
| Chân 49 | NC — Not connected (per datasheet) |
| Chân 50 | NC — Not connected (per datasheet) |
| Chân 51 | NC — Not connected (per datasheet) |
| Chân 52 | T1CKI — Timer 1 clock input |
| Chân 53 | T2CKI — Timer 2 clock input |
| Chân 54 | VDD — Positive supply voltage (third VDD pin) |
| Chân 55 | VSS — Ground (third VSS pin) |
| Chân 56 | NC — Not connected (per datasheet) |
| Chân 57 | NC — Not connected (per datasheet) |
| Chân 58 | NC — Not connected (per datasheet) |
| Chân 59 | NC — Not connected (per datasheet) |
| Chân 60 | NC — Not connected (per datasheet) |
| Chân 61 | NC — Not connected (per datasheet) |
| Chân 62 | NC — Not connected (per datasheet) |
| Chân 63 | NC — Not connected (per datasheet) |
| Chân 64 | NC — Not connected (per datasheet) |
Ứng dụng tiêu biểu
PIC17LC752T-08I/PT phù hợp cho 7 Áp dụngs: Industrial Control Panels, HVAC and Appliance Controllers, Smart Metering and Sub-metering, Motor Driver Front-Ends, Instrumentation Sub-systems, Keypad / Display Terminals, Legacy Industrial Retrofit Boards.
Industrial Control Panels
Driving relays, indicators, and keypads in factory-floor HMIs where deterministic real-time response and 33 digital I/Os are needed. The PIC17LC752T-08I/PT fits this role because its 8 MHz clock and 2-cycle branch timing deliver fast scan rates for debounce logic, while the wide 2.5V-5.5V supply accepts 24 V step-down rails. Place a 0.1 uF decoupling cap at VDD and use optoisolation on the relay outputs. Trade-off: OTP memory prevents field firmware updates; for re-programmable variants choose PIC18F-family parts instead.
Được đề xuất
HVAC and Appliance Controllers
Closed-loop control of compressors, fan motors, and temperature sensors in HVAC and white-goods products. The PIC17LC752T-08I/PT serves here because the integrated capture/compare/PWM module produces accurate switching waveforms for triac-burst heating control, and the analog comparator plus ADC channels read thermistor bridges directly. The 16 KB OTP holds full state-machine firmware with room to spare. Trade-off: limited RAM restricts protocol-stack depth, so for IoT-connected appliances consider migrating to the PIC18F26K40 with on-chip EEPROM and Core Independent Peripherals.
Được đề xuất
Smart Metering and Sub-metering
Sub-metering electricity, water, or gas consumption where the 16 KB OTP firmware holds tariff tables, calibration coefficients, and communication stacks. The PIC17LC752T-08I/PT fits because its 33 I/Os multiplex pulse inputs from sensor fronts, while the USART drives an optical port or PLC modem. Industrial -40C to +85C range supports outdoor cabinet deployments. Trade-off: as NRND, long-term field maintenance requires lifetime buy; for new designs, choose the PIC18F46K22 with on-chip RTC and 1-wire support.
Được đề xuất
Motor Driver Front-Ends
Stepper and brushed-DC motor sequencing where deterministic control loops and accurate timing outweigh code size. The PIC17LC752T-08I/PT fits because its CCP module generates precise step pulses, and the 8 MHz clock with single-cycle instructions enables microsecond-level commutation latency. Add external gate drivers (e.g., IR2104) between the MCU outputs and the FET half-bridges. Trade-off: lack of dedicated motor-control PWM channels limits field-oriented control; for FOC applications, use dsPIC33EV256GM106 or similar.
Được đề xuất
Instrumentation Sub-systems
Sensor signal conditioning, range switching, and display multiplexing inside bench-top instruments. The PIC17LC752T-08I/PT contributes here through its 33 I/Os handling range relays, rotary-encoder inputs, LCD multiplexing, and keypads, while the analog comparator watches the input stage. Industrial temperature rating suits lab environments. Trade-off: no on-chip ADC of meaningful precision; pair with MCP3421 18-bit sigma-delta ADC for measurement accuracy, or migrate to dsPIC33EP64MC504 with 12-bit ADC if higher sampling is required.
Được đề xuất
Keypad / Display Terminals
Standalone terminals or sub-displays where matrix keypads, character LCDs, and LED indicators are multiplexed. The PIC17LC752T-08I/PT fits because its 33 I/Os can drive a 4x5 keypad plus a 16-character LCD with no external expander. The USART bridges to a host controller. Industrial temperature range and 2.5V-5.5V input support battery-backed operation. Trade-off: no USB or CAN on-chip; for USB-connected panels consider PIC16LF1455 or PIC18F14K50.
Được đề xuất
Legacy Industrial Retrofit Boards
Sustaining-equivalent replacements for legacy controllers on production lines and field installations where firmware is frozen and a same-package, pin-compatible MCU is required. The PIC17LC752T-08I/PT is well-suited because dropping it onto an existing TQFP-64 footprint preserves the original board layout, while OTP memory matches the legacy cost model. Trade-off: long-term field support depends on distributor lifetime-buy stock, so for new designs favoring flash re-programmability, choose the PIC16LF877A-I/PT or PIC18F452-I/PT.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC17LC752T-08I/PT — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC17LC752T-08/PT | PIC17LC752T-08I/PT | PIC17LC752T-08I/L | PIC17C752-16I/PT | PIC17C752T-08I/PT | PIC17C752T-08/PT |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-64 | TQFP-64 - same | TQFP-64 - same | PLCC-68 | TQFP-64 - same | TQFP-64 - same | TQFP-64 - same |
| Architecture / Core | PIC17C 8-bit RISC | PIC17C 8-bit RISC | PIC17C 8-bit RISC | PIC17C 8-bit RISC | PIC17C 8-bit RISC | ||
| Program Memory Size | 16 KB OTP | 16 KB OTP | 16 KB OTP | 16 KB OTP | 16 KB OTP | ||
| Maximum Clock Frequency | 8 MHz | 8 MHz | 8 MHz | 16 MHz | 8 MHz | ||
| Supply Voltage Range | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | ||
| Operating Temperature Range | -40 C to +85 C (industrial) | 0 C to +70 C (commercial) | -40 C to +85 C (industrial) | -40 C to +85 C (industrial) | -40 C to +85 C (industrial) | ||
| I/O Pins | 33 | 33 | 33 | 33 | |||
| Lifecycle Status | NRND | NRND | NRND | NRND |
Bảo phân biệt quan trọng
- Wide 2.5 V to 5.5 V supply enables 3.3 V and 5 V rail operation (vsPIC17C752T-08I/PT)
- 33 digital I/O pins in TQFP-64 for mixed-signal control (vsPIC16LF877A-I/PT)
- Industrial -40 C to +85 C range (vsPIC17LC752T-08/PT)
Ghi chú thiết kế
Place a 0.1 uF ceramic decoupling capacitor as close as possible to each VDD pin (TQFP-64 has three VDD pins: 8, 39, 54) and a 10 uF bulk tantalum or ceramic capacitor on the board supply rail. The PIC17LC752T-08I/PT operates from 2.5 V to 5.5 V; for noisy 5 V industrial rails, add an LC pi-filter (10 uH + 10 uF + 10 uF) in front of the MCU to suppress switching transients from relays or triacs on the same PCB.
Do not confuse the PIC17LC (low-voltage 2.5 V to 5.5 V) variant with the PIC17C (4.5 V to 5.5 V only) variant. Both share the TQFP-64 pinout, so a PIC17C may appear to be a drop-in replacement on a 3.3 V board, but it will fail outside its 4.5 V minimum. Always check the VDD range before substituting. Also note OTP memory cannot be re-flashed, so a code bug requires mechanical replacement; budget for a flash-programmable PIC16LF or PIC18F variant during prototyping.
Route the oscillator traces (OSC1/OSC2) and MCLR trace as short as possible to minimize EMI susceptibility. Keep crystal traces inside a grounded guard ring and avoid running noisy digital lines underneath. Estimated PCB stackup: 4-layer FR4 with continuous ground plane on layer 2 below the MCU footprint. For the 33 digital I/Os, leave room for in-line 100-ohm series resistors if the PCB will operate in industrial EMI environments.
Thông tin tuân thủ
RoHS compliant per Microchip product page. Not AEC-Q100 qualified (not an automotive-grade MCU). For automotive designs requiring AEC-Q100, consider dsPIC33EV family instead.
