PIC24EP64MC202-I/MM - 70 MIPS Motor Control MCU | Microchip
MPN: PIC24EP64MC202-I/MM ✓ Hoạt độngPIC24EP64MC202-I/MM Tóm tắt
A motor-control MCU is a specialized microcontroller designed to regulate power converters, motor currents, speed, and position with deterministic timing. Within the embedded-control hierarchy, this device belongs to the 16-bit microcontroller class and combines a DSP-capable core with advanced analog peripherals, high-speed PWM, quad encoder interface support, and programmable event generation. That combination reduces external control hardware in motor systems while improving responsiveness.
Key features include 70 MIPS execution performance, 64 KB of Flash program memory, 8 KB of SRAM, an 8-bit data bus, three internal operational amplifiers, four comparators, MCPWM hardware, QEI support, and PTG peripherals. The 3.0 V to 3.6 V operating range suits industrial 3.3 V systems, while the -I/MM ordering designation identifies the industrial temperature and QFN packaging configuration used in this exact assembly.
The integrated analog and timing architecture allows control loops to be implemented close to the motor drive hardware. Three operational amplifiers can support current sensing, conditioning, and feedback functions, while four comparators provide fast threshold detection. MCPWM and PTG hardware complement the CPU for deterministic waveform generation and event timing, reducing interrupt overhead during high-rate motor-control operations.
Typical uses include brushless DC motor controllers, servo and stepper motor drives, industrial automation equipment, power-conversion systems, and position-control modules. The QEI capability is particularly useful for incremental encoders, while the integrated analog channels support current and voltage feedback in closed-loop systems.
The primary design consideration is package-level thermal and layout planning. A 6 x 6 mm QFN with an exposed pad requires careful land-pattern implementation, short return paths, and adequate copper for heat spreading. Firmware must also validate motor-startup, fault handling, and protective shutdown behavior rather than relying only on nominal control calculations.
This page combines device specifications, practical application guidance, package information, and engineering design notes to provide a more complete purchasing and implementation reference than a basic catalog listing.
Bộ thay thế dễ dàng lắp đặt cho PIC24EP64MC202-I/MM — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC24EP64MC202-I/MM (cùng hình factor và footprint) — khác nhau ở Package, ADC, Operating Temperature, Program Memory (Flash), RoHS Status.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếPIC24EP64MC202-I/MM Tỷ lệ tối đa & tính chất điện
| CPU Architecture | 16-bit |
| Maximum Performance | 70 MIPS |
| Maximum Clock Speed | 60 MHz |
| Bề rộng đường dữ liệu | 8 bit |
| Program Memory | 64 KB Flash (22K x 24) |
| SRAM | 8 KB |
| Supply Voltage Range | 3.0 V to 3.6 V |
| Hộp | 28-QFN-S (6 x 6 mm) |
| Package Height | 1.10 mm |
| Exposed Thermal Pad | Yes |
| Internal Operational Amplifiers | 3 |
| Internal Comparators | 4 |
| Motor-Control PWM | MCPWM |
| Encoder Interface | QEI |
| Programmable Event Generation | PTG |
| Lifecycle Stage | Active |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân PIC24EP64MC202-I/MM 1.10 mm
Cấu hình chân cho PIC24EP64MC202-I/MM (1.10 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho PIC24EP64MC202-I/MM.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PIC24EP64MC202-I/MM phù hợp cho 6 Áp dụngs: Brushless DC Motor Control, Stepper Motor Position Control, Servo Drive Control, Industrial Fan and Pump Control, Battery-Powered Portable Equipment, Power Conversion and Inverter Control.
Brushless DC Motor Control
The PIC24EP64MC202-I/MM fits brushless DC motor controllers that require deterministic commutation and compact sensing electronics. Its 70 MIPS core provides control-loop processing, while MCPWM and PTG peripherals generate timing events without relying entirely on CPU interrupts. Three internal operational amplifiers and four comparators can support current sensing, phase-voltage detection, and protection thresholds. The 64 KB Flash memory accommodates motor tables and control algorithms, while 8 KB of SRAM provides working space for state-machine and current-control variables. In a 3.3 V design, engineers must still verify motor-driver voltage levels, fault shutdown behavior, and the exposed-pad thermal path.
Được đề xuất
Stepper Motor Position Control
The PIC24EP64MC202-I/MM is appropriate for closed-loop stepper systems where position tracking must remain synchronized with commanded motion. QEI hardware can decode incremental encoder signals, while the 60 MHz maximum clock supports trajectory calculation and step-direction control. The 64 KB Flash region is suitable for motion profiles, calibration data, and state-machine firmware, and 8 KB of SRAM can hold position counters and control parameters. MCPWM can assist with excitation timing, while comparators may implement homing or overtravel detection. Actual motor-drive topology determines whether external level shifters, current-sense amplifiers, and protection circuitry are still required.
Được đề xuất
Servo Drive Control
The PIC24EP64MC202-I/MM suits compact servo drives that combine position feedback, real-time current regulation, and coordinated PWM output. Its 70 MIPS processing capability supports the control mathematics required in higher-performance servo loops, while QEI provides a dedicated path for incremental encoder feedback. Four comparators can assist with fast overcurrent, fault, and limit detection, and three internal operational amplifiers can condition sensed feedback signals. The device operates from 3.0 V to 3.6 V, simplifying integration with a 3.3 V logic domain. Designers should confirm that analog bandwidth, PWM timing, and thermal performance meet the servo bandwidth and power-stage requirements.
Được đề xuất
Industrial Fan and Pump Control
The PIC24EP64MC202-I/MM can implement efficient BLDC fan or pump controllers where precise speed regulation is more important than using a general-purpose MCU with discrete timing logic. MCPWM supports deterministic power-stage control, QEI can accept rotor-position feedback, and PTG can coordinate repetitive events across multiple control channels. The three internal operational amplifiers provide useful resources for current or pressure-sensor signal conditioning, while four comparators support threshold-based fault detection. With 64 KB of Flash and 8 KB of SRAM, the controller can store start-up profiles, calibration constants, and diagnostic logic. Qualification testing should cover fan or pump inertia, electrical noise, sensor accuracy, and protection behavior over the intended operating range.
Được đề xuất
Battery-Powered Portable Equipment
The PIC24EP64MC202-I/MM is suitable for compact battery-powered equipment requiring precise actuator or pump control within a 3.3 V power budget. The 70 MIPS core allows sophisticated control algorithms to execute without moving computation to an external processor, and PTG can reduce repetitive timing overhead. MCPWM and QEI support efficient energy conversion and rotor-position tracking, which is valuable in portable blower, pump, and haptic systems. Three internal op amps and four comparators can reduce the analog component count around sensing and protection circuits. Because the exact operating-temperature limits are not stated on the product page, portable and automotive-grade requirements must be checked against the manufacturer datasheet before environmental qualification.
Được đề xuất
Power Conversion and Inverter Control
The PIC24EP64MC202-I/MM can serve as the supervisory controller for a compact inverter or power-conversion subsystem. MCPWM provides deterministic switch-command timing, QEI can acquire rotor or position information, and the integrated op amps and comparators support current sensing, threshold detection, and protection sequencing. The 16-bit, 70 MIPS architecture is well suited to real-time control tasks, while 64 KB of Flash provides room for control laws and fault-handling routines. The 3.0 V to 3.6 V range places the controller in a conventional 3.3 V logic domain, allowing direct interfacing with suitable gate drivers and sensing stages. Power-stage switching frequencies, isolation requirements, ADC performance, and layout creepage must be evaluated independently of the MCU specifications.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC24EP64MC202-I/MM — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
Ghi chú thiết kế
Implement the 28-QFN-S footprint from the manufacturer land-pattern guidance and reserve adequate copper for the exposed thermal pad. Place input decoupling and analog-ground connections close to their associated pins, keep switching-node copper away from sensitive feedback traces, and route high-current power-stage paths separately from the MCU and analog sections.
Operate the PIC24EP64MC202-I/MM from the specified 3.0 V to 3.6 V supply range. Include local bulk and high-frequency decoupling at the device, verify power-source startup behavior, and ensure motor-driver transients do not pull the MCU rail outside its limits. Separate noisy switching returns from analog references where the board stack-up permits.
Do not treat the related PIC24EP64MC202-I/SO configuration as a board-level replacement for the QFN-S target. Its SOIC footprint differs from the 6 x 6 mm QFN-S land pattern. Likewise, confirm MCPWM channel assignments, QEI signals, comparator inputs, and analog-channel multiplexing in the exact pin-description table before assigning PCB functions.
Use the exposed pad as both an electrical connection, generally to ground according to the manufacturer pin guidance, and a thermal spreader. Avoid thermally isolating it with an unintended solder mask opening or via field. Validate junction and ambient conditions under worst-case motor activity because PWM switching and power-supply losses can heat the package even when the MCU itself has a modest load.
Preserve the timing margin of encoder and control signals by keeping QEI and digital command routes short and away from motor-switching nodes. Provide a defined return path beneath high-speed traces and use appropriate filtering at analog inputs. Validate the complete control loop with realistic motor cables, because reflected edges and common-mode transients can affect encoder and current-sense accuracy.
Thông tin tuân thủ
Compliance status was not stated in the product-page and distributor results and requires confirmation from the manufacturer product documentation.