PIC24FJ64GA202-I/SS - 16-Bit 32MHz Low-Power MCU | Microchip
MPN: PIC24FJ64GA202-I/SS ✓ Hoạt độngPIC24FJ64GA202-I/SS Tóm tắt
A microcontroller is the central programmable component in an embedded control system. It combines a processor core, nonvolatile program memory, volatile data memory, and peripherals such as timers, communication interfaces, and I/O ports. The PIC24F is a 16-bit RISC family positioned above 8-bit controllers for applications needing efficient arithmetic, greater memory capacity, and sophisticated peripheral integration without the complexity of a high-end application processor.
The PIC24FJ64GA202 combines a 32 MHz maximum operating frequency with performance rated at 16 MIPS. Its 64 KB Flash memory supports firmware storage, while 8 KB of RAM supports working data, stack operations, and communication buffers. An integrated crypto engine, key storage, and random-number generator add hardware-backed capabilities for protecting user data and supporting authenticated or encrypted communication in connected products.
The PIC24F GA2 family is structured for low-power embedded control. Low-power operation helps conserve battery energy in portable systems, while deep-sleep and clock-management features can reduce activity when the application does not require continuous processing. Its 28-pin SSOP package also supports conventional PCB assembly methods while exposing enough I/O for embedded control, communications, sensing, and actuator interfaces.
Typical uses include compact industrial controllers, battery-powered IoT equipment, secure access-control products, portable medical devices, connected sensors, and small automation modules. In these systems, the integrated crypto hardware can reduce the processing burden associated with cryptographic operations, while the 16-bit architecture and 8 KB RAM support real-time control and moderate protocol-stack workloads.
Designers should confirm the exact pin functions, peripheral assignments, clock configuration, and decoupling requirements from the manufacturer datasheet before layout. The SSOP footprint has a relatively long body compared with lead pitch, so board-space planning and solder-joint inspection deserve attention. Firmware development should also use the programming and debug interfaces specified for the PIC24FJ64GA202 device family.
This page combines the manufacturer product information with practical packaging, application, replacement, and design guidance. It helps engineers compare secure low-power MCU options by focusing on memory capacity, maximum clock rate, package compatibility, peripheral suitability, and the practical constraints of a 28-pin SSOP implementation.
Bộ thay thế dễ dàng lắp đặt cho PIC24FJ64GA202-I/SS — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC24FJ64GA202-I/SS (cùng hình factor và footprint) — khác nhau ở Package, Operating Temperature, Core Architecture, ADC, Crypto Engine.
PIC24FJ64GA002-I/SS
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC24FJ128GA202-I/SS
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC24F08KM202T-I/SS
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC24FJ64GA004-I/SS
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC24FJ64GA202-I/SS Tỷ lệ tối đa & tính chất điện
| Product Type | 16-bit Flash Microcontroller |
| Architecture | PIC24F RISC |
| Maximum CPU Frequency | 32 MHz |
| Instruction Throughput | 16 MIPS |
| Flash Memory | 64 KB |
| RAM | 8 KB |
| Program Memory Organization | 64K x 8 bits |
| Điện áp cung cấp | 2.5 V / 3.3 V |
| Hộp | 28-pin SSOP |
| Package Type | Gull-wing SSOP |
| Kiểu lắp đặt | Surface Mount |
| Package Length | 10.2 mm |
| Package Width | 5.3 mm |
| Package Height | 1.75 mm |
| Temperature Grade | Industrial |
| Crypto Engine | Integrated |
| Key Storage | Integrated |
| Random Number Generator | Integrated |
| Power Class | Low Power XLP |
Hướng dẫn cấu hình chân PIC24FJ64GA202-I/SS 1.75 mm
Cấu hình chân cho PIC24FJ64GA202-I/SS (1.75 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho PIC24FJ64GA202-I/SS.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PIC24FJ64GA202-I/SS phù hợp cho 6 Áp dụngs: Battery-Powered IoT Sensor Nodes, Secure Access-Control Terminals, Portable Medical Monitoring, Industrial Automation Modules, Connected Lighting and LED Control, Secure Portable Data Acquisition.
Battery-Powered IoT Sensor Nodes
PIC24FJ64GA202-I/SS fits compact IoT sensor nodes that need local control, secure device identity, and low standby power without a high-power application processor. Its 64 KB of Flash can hold the main firmware and protocol logic, while 8 KB of RAM supports working state and communication buffers. The integrated crypto engine, key storage, and random-number generator are useful when the design must protect data or generate secure random values. In operation, the MCU can sleep between measurements and use its low-power features to reduce energy consumption. The principal design constraint is the 28-pin SSOP footprint, which requires careful pin budgeting for sensors, communications, programming, and power.
Được đề xuất
Secure Access-Control Terminals
PIC24FJ64GA202-I/SS is suitable for access-control terminals that combine credential handling, local event logic, keypad or display interfaces, and communications with a host system. Its 64 KB of Flash provides space for protocol handlers and application logic, while 8 KB of RAM is adequate for short transaction buffers and control state. Hardware crypto, key storage, and a random-number generator provide a stronger basis for protected key operations than a software-only implementation. The MCU can manage a reader, indicators, and a communications interface concurrently through its embedded peripherals. Before final selection, confirm the exact peripheral mix and pin functions in the datasheet because security functionality alone does not guarantee compatibility with every access-control peripheral.
Được đề xuất
Portable Medical Monitoring
PIC24FJ64GA202-I/SS can serve as the control MCU in portable medical-monitoring equipment where low power, compactness, and secure data handling are important. Its 16-bit architecture executes at up to 32 MHz and 16 MIPS, providing enough control bandwidth for sensor sampling, signal conditioning supervision, and user-interface management. The 64 KB Flash and 8 KB RAM capacities support compact firmware and data buffering without an external memory bus. Keeping sensitive operations in a device with integrated key storage and a random-number generator can simplify the security architecture. Medical designs still require separate review of applicable device qualification, regulatory requirements, isolation, and the exact analog front end; the MCU rating alone does not establish medical certification.
Được đề xuất
Industrial Automation Modules
PIC24FJ64GA202-I/SS is appropriate for small industrial automation modules that coordinate sensors, discrete outputs, and local serial communications. At 32 MHz and 16 MIPS, the device can handle deterministic control tasks while its 64 KB of Flash accommodates application logic, diagnostics, and communication routines. The 8 KB RAM supports state variables and protocol buffers, while low-power operation benefits modules that spend substantial time idle. The device can be placed between a sensor interface and a communications transceiver, using embedded timers and I/O for control. The industrial temperature grade makes it a sensible starting point for typical factory equipment, although the design should verify maximum operating temperature, I/O limits, clock tolerance, and package-specific pin assignments for its enclosure and supply system.
Được đề xuất
Connected Lighting and LED Control
PIC24FJ64GA202-I/SS can coordinate connected LED lighting modules that require sequencing, status feedback, local controls, and secure network participation. Its 64 KB of Flash is suitable for firmware, lighting tables, and communication protocols, while the 16-bit processing core handles PWM and timing tasks more effectively than a basic 8-bit controller. The integrated crypto capabilities can help protect commands or device credentials in networked lighting systems. The MCU can update outputs through its embedded peripherals and monitor feedback from current or voltage sensing circuitry. The 28-pin SSOP package reduces board width compared with larger leaded packages, but every available pin must be budgeted for LED drivers, communications, programming, and decoupling. Thermal performance of the LED driver remains a separate board-level concern.
Được đề xuất
Secure Portable Data Acquisition
PIC24FJ64GA202-I/SS is well matched to compact data-acquisition devices that log sensor information, communicate with a host, and protect locally stored or transmitted records. The 64 KB Flash provides space for configuration, firmware, and calibration tables, while 8 KB RAM supports acquisition buffering and protocol state. At 32 MHz, the MCU can service multiple timers, communications tasks, and control operations while maintaining low-power behavior between samples. Its crypto engine, key storage, and random-number generator add hardware resources for authenticated data collection. A typical design would place a precision ADC upstream and use the MCU to configure the converter, timestamp samples, apply calibration, and manage the communications link. Verify ADC timing, interrupt resources, and required I/O against the selected 28-pin pinout.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC24FJ64GA202-I/SS — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC24FJ64GA002-I/SS | PIC24FJ128GA202-I/SS | PIC24F08KM202T-I/SS | PIC24FJ64GA004-I/SS |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP |
| Flash Memory | 64 KB | 64 KB | 128 KB | 8 KB | 64 KB |
| CPU Architecture | 16-bit PIC24F RISC | 16-bit PIC24F RISC | 16-bit PIC24F RISC | 16-bit PIC24F RISC | 16-bit PIC24F RISC |
| Temperature Grade | Industrial | Industrial | Industrial | Extended | Industrial |
Bảo phân biệt quan trọng
- Integrated security hardware within the same 28-pin SSOP footprint (vsPIC24FJ64GA002-I/SS)
- Larger firmware option in the same package family (vsPIC24FJ128GA202-I/SS)
- Balanced performance and memory for control-oriented designs (vsPIC24F08KM202T-I/SS)
- Clear GA2 security-feature positioning (vsPIC24FJ64GA004-I/SS)
Ghi chú thiết kế
Route the 28-pin SSOP footprint exactly to the manufacturer package drawing and confirm pin 1 orientation against the PCB silkscreen before fabrication. The listed body dimensions are 10.2 mm long, 5.3 mm wide, and 1.75 mm high, so the footprint must include adequate lead and courtyard clearance. Check every power, ground, programming, clock, and I/O connection in the datasheet pin table rather than inferring functions from adjacent pins.
Decouple each applicable supply pin near the device and route return current through a low-impedance ground plane. Because the supported operating points include 2.5 V and 3.3 V, verify the complete board supply range, sensor and transceiver levels, and any required level translation before layout. Use the manufacturer power-pin and decoupling recommendations for the exact GA202 package; changing package variants can alter which pins supply core and peripheral voltage domains.
Do not treat a same-package candidate as a secure drop-in replacement without checking peripheral mapping, interrupt resources, timing, boot behavior, and firmware support. PIC24FJ64GA002-I/SS matches the visible memory and package characteristics but lacks the GA202's identified crypto engine, key storage, and random-number generator. The 128 KB and 8 KB Flash alternatives retain the SSOP format but change firmware-memory headroom, while the 8 KB Flash alternative substantially reduces available program space.
Estimated: the MCU dissipation is approximately VDD times total operating current minus internal switching losses, but no device-specific operating-current or thermal-resistance values were established for this ordering code. Therefore, no junction-temperature estimate is presented. Validate thermal margin using the actual clock, I/O loading, ambient temperature, PCB copper, and the manufacturer thermal data. Do not infer safe dissipation from the industrial temperature grade alone.
Programming and debugging are part of the design constraint, not an afterthought. Reserve the pins required by the selected programming and debug interface, ensure that reset and boot behavior are compatible with the board's startup sequence, and test programming after final PCB assembly. The individual pin functions were not exposed in the accessible product listing, so use the manufacturer pin-description table when allocating these signals.
Thông tin tuân thủ
The available product information identifies the industrial-temperature ordering option but does not establish the target device's RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is treated as not applicable because this is an industrial MCU rather than an explicitly automotive-qualified ordering code.