PIC24FJ64GB202-I/SP - 32MHz USB Crypto MCU | Microchip
MPN: PIC24FJ64GB202-I/SP ✓ Hoạt độngPIC24FJ64GB202-I/SP Tóm tắt
A microcontroller is a programmable semiconductor that integrates a processor core, memory, digital peripherals, and input/output circuitry on one package. The PIC24FJ64GB202 belongs to the PIC24F family of 16-bit flash microcontrollers and the broader embedded-control hierarchy. It is intended for low-power embedded systems that need more computation and communications capability than an 8-bit controller without moving to a larger 32-bit platform.
Core features include 64 KB of Flash program memory, 8 KB of RAM, operation up to 32 MHz, 16 MIPS performance, USB connectivity, and an integrated crypto engine. The manufacturer identifies key storage and a random number generator as additional security resources. These functions allow a design to retain compact firmware storage while supporting protected data handling and communication between a peripheral device and a host.
The device combines a 16-bit PIC architecture with dedicated serial, timing, and communication peripherals. Its 28-pin SPDIP format supports through-hole assembly and prototyping, while the 3.3 V operating supply suits compact embedded equipment. Because the exact pin assignments, memory organization, peripheral count, and electrical limits are defined in the Microchip datasheet, designers should use its pin-description table and electrical-characteristics section when finalizing the PCB and power design.
Typical applications include USB-connected low-power embedded controllers, secure key-management accessories, data-protection systems, portable instrumentation, and connected industrial modules. USB can simplify host connectivity, while the cryptographic resources reduce the need for a separate secure controller when the required protection is supported by the integrated hardware.
The principal design consideration is package-level PCB compatibility. The 28-pin SPDIP footprint is convenient for prototyping but unsuitable for compact production assemblies without a conversion to another manufacturer package option. Confirm the exact pin names, USB requirements, decoupling values, and peripheral assignments against the manufacturer datasheet before schematic capture.
This page consolidates the verified device identity, memory and connectivity characteristics, package details, qualified drop-in alternatives, and practical design guidance. It also distinguishes documented functions from characteristics that still require confirmation from the datasheet, helping engineers plan the hardware without copying unsupported assumptions.
Bộ thay thế dễ dàng lắp đặt cho PIC24FJ64GB202-I/SP — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC24FJ64GB202-I/SP (cùng hình factor và footprint) — khác nhau ở Package, Mounting Type, ADC, Core Architecture, Program Memory (Flash).
PIC24FJ64GB202-E/SP
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC24FJ64GB002-I/SP
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC24FJ64GB202-I/SP Tỷ lệ tối đa & tính chất điện
| Product Type | 16-bit Flash microcontroller |
| Series | PIC24F |
| Tần số xung maksimum | 32 MHz |
| Instruction Throughput | 16 MIPS |
| Flash Program Memory | 64 KB |
| RAM | 8 KB |
| Điện áp cung cấp hoạt động | 3.3 V |
| USB Connectivity | Yes |
| Cryptographic Engine | Yes |
| Key Storage | Yes |
| Random Number Generator | Yes |
| Hộp | 28-pin SPDIP |
| Package Pin Count | 28 pins |
| Kiểu lắp đặt | Through-hole |
| Industrial Temperature Grade | -40 °C to +85 °C |
| Packaging | Tube |
| Architecture | 16-bit PIC RISC |
Hướng dẫn cấu hình chân PIC24FJ64GB202-I/SP 28 pins
Cấu hình chân cho PIC24FJ64GB202-I/SP (28 pins gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho PIC24FJ64GB202-I/SP.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PIC24FJ64GB202-I/SP phù hợp cho 6 Áp dụngs: USB Low-Power Embedded Controller, Secure Data-Protection Accessory, Portable Instrumentation Module, Industrial Connected Control Module, Battery-Powered Sensor Node, User-Authentication Token.
USB Low-Power Embedded Controller
The PIC24FJ64GB202-I/SP fits a USB-connected peripheral that must run embedded control firmware without a separate host computer. Its 32 MHz clock and 16 MIPS throughput provide capacity for protocol handling and control tasks, while 64 KB of Flash stores firmware and 8 KB of RAM supports working state. USB connectivity simplifies the physical interface to a host. The design should allocate the USB data and power pins exactly as shown in the manufacturer datasheet, provide the specified decoupling, and validate suspended-current behavior when battery life is important.
Được đề xuất
Secure Data-Protection Accessory
The integrated cryptographic capabilities make PIC24FJ64GB202-I/SP suitable for a USB accessory that stores keys or processes protected data. Microchip identifies the crypto engine, key storage, and random number generator as integrated resources for security-oriented embedded systems. The 16-bit processor at 32 MHz can coordinate USB traffic and control functions while 8 KB of RAM handles transient data. Firmware should use the supported cryptographic workflows and key-handling procedures described by Microchip rather than assuming general-purpose MCU instructions provide equivalent protection.
Được đề xuất
Portable Instrumentation Module
A compact portable instrument can use the PIC24FJ64GB202-I/SP as its local control and communications MCU when it needs USB connectivity and secure storage of configuration data. The 32 MHz operating speed and 16 MIPS execution rate support responsive peripheral control, while 64 KB of Flash accommodates application firmware and 8 KB of RAM supports active measurement workflows. USB offers a practical connection to a host for configuration or data transfer. For battery-operated equipment, use the low-power modes and clock arrangements specified in the manufacturer datasheet and measure average current across realistic operating states.
Được đề xuất
Industrial Connected Control Module
The PIC24FJ64GB202-I/SP is suitable for an industrial control module that combines local peripheral management with a USB service interface. Its 16-bit PIC architecture executes at up to 16 MIPS, providing more headroom than basic 8-bit control for communication stacks and supervisory logic. The 64 KB Flash and 8 KB RAM capacities are appropriate for moderate embedded workloads, and the -I/SP ordering code targets industrial-temperature use. Engineers should verify the precise peripheral set, I/O availability, and extended-temperature limits in the Microchip datasheet before freezing the schematic.
Được đề xuất
Battery-Powered Sensor Node
A battery-powered sensor node can employ the PIC24FJ64GB202-I/SP when the design benefits from USB service connectivity and hardware-assisted security without requiring a larger processor. The microcontroller consolidates 32 MHz control performance, 64 KB of program storage, and 8 KB of RAM in one device, reducing the number of external components. Its low-power product positioning supports energy-conscious designs, although actual battery life depends on sensor duty cycle, USB attachment time, and selected sleep modes. Review the device's power-consumption characteristics and peripheral clock requirements in the manufacturer datasheet.
Được đề xuất
User-Authentication Token
PIC24FJ64GB202-I/SP can serve as the controller in a hardware authentication token that exchanges protected information over USB. The integrated crypto engine, key storage, and random number generator provide resources for security-focused implementations, while 64 KB of Flash accommodates firmware for command handling and key workflows. The 8 KB RAM supports packet assembly and transient processing, and the 32 MHz clock supports responsive interaction with a USB host. Secure firmware development should follow Microchip's cryptographic guidance and avoid exposing sensitive material through debug or programming interfaces.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC24FJ64GB202-I/SP — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC24FJ64GB202-E/SP | PIC24FJ64GB002-I/SP |
|---|---|---|---|
| Package | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Product Series | PIC24F | PIC24F | PIC24F |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz |
| Instruction Throughput | 16 MIPS | 16 MIPS | 16 MIPS |
| Flash Memory | 64 KB | 64 KB | 64 KB |
| RAM | 8 KB | 8 KB | 8 KB |
| USB Connectivity | Yes | Yes | Yes |
| Operating Supply Voltage | 3.3 V | 3.3 V | 3.3 V |
Bảo phân biệt quan trọng
- Integrated cryptographic resources in the same 28-pin SPDIP controller (vsPIC24FJ64GB002-I/SP)
- Direct same-package temperature-grade alternative (vsPIC24FJ64GB202-E/SP)
- 16 MIPS control performance with integrated USB (vsPIC24FJ64GB002-I/SP)
Ghi chú thiết kế
Begin the layout by assigning every 28-pin SPDIP position directly from the Microchip pin-description table and package drawing. Preserve the orientation of pin 1, keep USB differential routing as short and symmetric as practical, and place required input and output capacitors close to their associated pins. Because the pin names and exact decoupling values were not available in the product information, use the manufacturer datasheet rather than copying a generic PIC24F schematic.
Design the 3.3 V rail for both ordinary processing and USB transceiver requirements. Verify the device's recommended supply range, decoupling network, USB bus-powered current behavior, and startup sequencing in the Microchip datasheet. Battery-powered products should also quantify active current, idle current, and sleep current under the intended clock and USB attachment conditions; the final regulator choice must accommodate the measured peak load without violating the MCU limits.
Do not assume that a same-package MCU is a drop-in replacement at the firmware level. PIC24FJ64GB202-I/SP and PIC24FJ64GB002-I/SP share principal memory and USB attributes, but the GB202 adds cryptographic hardware, key storage, and a random number generator. Review peripheral assignments, interrupt vectors, register definitions, startup code, and security requirements before substituting one device for the other.
Thông tin tuân thủ
The manufacturer product information identifies the PIC24FJ64GB202 as a low-power 16-bit microcontroller with USB and integrated cryptographic hardware, but it does not state component-specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status.