PIC32CM5164LS60100T-I/PF - 512KB Flash Cortex-M23 MCU | Microchip
MPN: PIC32CM5164LS60100T-I/PF ✓ Hoạt độngPIC32CM5164LS60100T-I/PF Tóm tắt
Key features include an integrated Trust Platform ATECC608 secure element, Arm TrustZone for Cortex-M technology, immutable secure boot, and up to 48 MHz CPU clock with SleepWalking peripherals that keep sensors active while the CPU sleeps. The device also integrates a 12-bit ADC, op-amps, DACs, comparators, and a Cryptographic Accelerator supporting AES, SHA, and RSA operations alongside a true random number generator (TRNG).
A microcontroller (MCU) is a compact integrated circuit containing a CPU core, program memory, RAM, and programmable peripherals in a single chip. The PIC32CM LS60 family positions itself within the hierarchy of: microcontroller -> 32-bit MCU -> Cortex-M class MCU -> secure low-power MCU -> IoT/edge security MCU -> semiconductor. Compared to legacy PIC24/PIC32MX parts, Cortex-M23 cores execute the Thumb-2 instruction set and deliver higher code density per MHz.
The LS60 family is designed for hardened-security IoT endpoints, smart-home hubs, industrial sensor nodes, and touch-enabled human-machine interfaces. Sleep currents in the microamp range and active mode below 100 uA/MHz make it suitable for battery-powered edge devices that must remain in the field for years. The 100-pin TQFP provides abundant GPIO for parallel displays, capacitive touch matrices, and multiple serial interfaces including SERCOM, I2C, SPI, and CAN-FD.
Typical applications include secure IoT nodes with certificate-based authentication, industrial HMI panels with touch and TFT support, low-power wireless sensor nodes, smart meters, and home automation gateways. When designing with this device, reserve adequate PCB area for the TQFP-100 footprint and follow the QSPI/SERCOM routing guidance in the Microchip application notes for best EMC performance.
Bộ thay thế dễ dàng lắp đặt cho PIC32CM5164LS60100T-I/PF — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC32CM5164LS60100T-I/PF (cùng hình factor và footprint) — khác nhau ở Package, ADC, Operating Temperature, SRAM, Integrated Secure Element.
PIC32CM5164LS60100-I/PF
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32CM2532LS60100-I/PF
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32CM5164LE00100
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC32CM5164LS60048T-I/U5B
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32CM5164LS60100T-I/PF Tỷ lệ tối đa & tính chất điện
| Core Architecture | Arm Cortex-M23 |
| Tần số xung maksimum | 48 MHz |
| Program Memory (Flash) | 512 KB |
| Data Memory (SRAM) | 64 KB |
| Supply Voltage Range | 2.0 V to 3.63 V |
| Khoảng nhiệt độ hoạt động | -40C to +85C (Industrial) |
| Hộp | TQFP-100 (PF) |
| Kiểu lắp đặt | Surface Mount |
| Security | Arm TrustZone, ATECC608 Trust Platform, secure boot, TRNG |
| Touch Support | Yes (Capacitive Touch with Driven Shield+) |
| ADC | 12-bit |
| Communication Interfaces | SERCOM, I2C, SPI, UART, CAN-FD |
| Trạng thái RoHS | Compliant |
| Lead-Free | Yes |
| Tape & Reel Suffix | T (Tape and Reel) |
Cấu hình chân PIC32CM5164LS60100T-I/PF
| Chân 1 | PA00 — GPIO / SERCOM / ADC input |
| Chân 10 | PA09 — GPIO / SERCOM |
| Chân 20 | PA18 — GPIO / SERCOM |
| Chân 30 | PB03 — GPIO / SERCOM |
| Chân 40 | PB13 — GPIO / SERCOM |
| Chân 50 | PC03 — GPIO / SERCOM |
| Chân 60 | PC13 — GPIO / SERCOM |
| Chân 70 | PD03 — GPIO / SERCOM |
| Chân 80 | PD13 — GPIO / SERCOM |
| Chân 90 | GND — Ground |
| Chân 100 | VDD — Power supply |
Ứng dụng tiêu biểu
PIC32CM5164LS60100T-I/PF phù hợp cho 6 Áp dụngs: Secure IoT Edge Node, Industrial HMI with Touch, Smart Metering, Battery-Powered Wireless Sensor, Home Automation Gateway, Automotive Body and Comfort Module.
Secure IoT Edge Node
The PIC32CM5164LS60100T-I/PF suits secure IoT edge nodes because of its integrated ATECC608 Trust Platform, Arm TrustZone hardware isolation, and true random number generator. The 512 KB Flash stores TLS stacks and signed firmware images, while the Cortex-M23 at 48 MHz handles MQTT or CoAP communication. TrustZone enforces secure boot and isolates keys from the application, satisfying Matter and PSA Certified level 1 requirements for connected home and industrial sensor deployments.
Được đề xuất
Industrial HMI with Touch
The PIC32CM5164LS60100T-I/PF integrates the Driven Shield+ capacitive touch hardware and a 12-bit ADC that scans up to several hundred touch channels, replacing dedicated touch ICs in industrial HMI panels. The 100-pin TQFP exposes enough GPIO to drive TFT LCDs with parallel RGB or SPI interfaces, while SleepWalking peripherals poll sensors without waking the Cortex-M23 core, reducing system power in factory-floor operator panels.
Được đề xuất
Smart Metering
For smart electricity, gas, and water meters, the PIC32CM5164LS60100T-I/PF provides Cortex-M23 performance with hardware crypto to authenticate billing data and prevent tampering. The 64 KB SRAM buffers metering samples before transmitting over PLC, M-Bus, or wireless M-Bus, and the -40C to +85C industrial range covers outdoor meter enclosures. Secure boot with the integrated ATECC608 anchors the root of trust for signed firmware updates mandated by IEC 62056 and DLMS/COSEM protocols.
Được đề xuất
Battery-Powered Wireless Sensor
The PIC32CM5164LS60100T-I/PF drops into coin-cell-powered wireless sensor designs thanks to SleepWalking peripherals, microamp-range sleep current, and Cortex-M23 efficiency. Its 2.0 V to 3.63 V supply range accepts direct Li-coin or two AA cells, and TrustZone lets the radio stack update keys securely without exposing them to the application layer. Engineers pair it with sub-GHz or BLE modules and rely on AES hardware acceleration for encrypted payloads.
Được đề xuất
Home Automation Gateway
In Matter, Thread, or Zigbee home automation gateways, the PIC32CM5164LS60100T-I/PF runs the commissioning logic and PSA Certified crypto stack with its integrated Trust Platform. The 100-pin TQFP delivers ample GPIO for keypad scanning, status LEDs, and dual radio coexistence control. Hardware AES/SHA acceleration reduces time spent in TLS handshakes, while secure boot prevents unauthorized firmware from joining the home network.
Được đề xuất
Automotive Body and Comfort Module
Although not AEC-Q100 qualified, the PIC32CM5164LS60100T-I/PF serves non-safety automotive body modules such as door-zone controllers, ambient lighting nodes, and HVAC user interfaces. CAN-FD peripheral handles communication with the vehicle bus, the 12-bit ADC reads thermistors and potentiometers, and capacitive touch supports backlit switch panels. Designers select this MCU when hardware crypto is needed for secure diagnostics over CAN but full AEC-Q100 is not required.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC32CM5164LS60100T-I/PF — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC32CM5164LS60100-I/PF | PIC32CM2532LS60100-I/PF | PIC32CM5164LE00100 | PIC32CM5164LS60048T-I/U5B |
|---|---|---|---|---|---|
| Package | TQFP-100 (PF) | TQFP-100 (PF) - same | TQFP-100 (PF) - same | TQFP-100 (PF) - same | TQFP-100 (PF) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 512 KB | 512 KB | 256 KB | 512 KB | 48 KB |
| SRAM | 64 KB | 64 KB | 32 KB | 64 KB | 16 KB |
| Integrated Crypto (ATECC608) | Yes | Yes | Yes | No | Yes |
| Maximum Clock | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| Capacitive Touch Support | Yes (Driven Shield+) | Yes | Yes | Yes | Yes |
Bảo phân biệt quan trọng
- Integrated ATECC608 Trust Platform secure element (vsPIC32CM5164LE00100)
- Largest Flash density in the LS60 family (vsPIC32CM2532LS60100-I/PF)
- Full TrustZone hardware isolation (vsPIC32CM5164LS60064T-I/PT)
Ghi chú thiết kế
The PIC32CM5164LS60100T-I/PF operates from a single 2.0 V to 3.63 V supply; place a 1 uF X7R bypass capacitor within 5 mm of each VDD pin pair and a 10 uF bulk capacitor near the package. Decouple VDDCORE separately with a 1 uF low-ESR ceramic to suppress switching transients when the Cortex-M23 core wakes from Sleep. Follow Microchip AN-DS00002653 guidance for multi-rail sequencing.
Route SERCOM differential pairs (SPI, I2C) with matched lengths and a ground reference plane to maintain signal integrity up to the supported 48 MHz peripheral rates. Keep QSPI traces to 50 ohm controlled impedance and isolate them from analog ADC traces. Exposed pad variants of the TQFP-100 share a thermal pad that must be soldered to a continuous ground copper pour for heat dissipation and mechanical reliability.
Do not configure PA00/PA01 as GPIO if the debugger needs the SWD interface for production programming; reserve those pins for SWDIO and SWCLK. Verify the TrustZone NSC configuration before locking the device - misconfigured secure regions can brick the MCU and require a full mass-erase via SWD to recover. Disable unused peripherals in the PMUX register to avoid phantom current draw in deep-sleep modes.
Thông tin tuân thủ
RoHS and lead-free status from Microchip product page as of 2026-09-30. Not AEC-Q100 qualified - choose automotive-qualified PIC32CK or dsPIC33A parts for vehicle applications. REACH compliance declared on Microchip substance declarations.
