PIC32MK0512GPK064T-I/PT - 120MHz 32-bit MCU 512KB Flash TQFP-64 | Microchip
MPN: PIC32MK0512GPK064T-I/PT ✓ Hoạt độngPIC32MK0512GPK064T-I/PT Tóm tắt
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, timers, communication peripherals, and analog/digital I/O. 32-bit microcontrollers extend 8/16-bit parts with wider registers, deterministic interrupt latency, hardware floating-point and DSP engines, and larger address spaces; PIC32MK MCUs sit in the performance tier between low-power Cortex-M0+ parts and application processors, providing deterministic real-time control with on-chip op amps, high-speed ADCs and PWM modules.
Key features include 512 KB Flash with ECC, 128 KB SRAM, 4 KB EEPROM emulation, a single-precision FPU, DSP instructions, a USB 2.0 Full-Speed device/host/OTG controller, multiple UART/SPI/I2C interfaces, up to seven 16-bit timers, and a 12-bit ADC with up to 3 MSPS sampling and dedicated op amps. The 64-pin TQFP (PT) package offers 49 user I/O lines and an operating voltage of 2.3V to 3.6V, suitable for 3.3V digital systems with industrial temperature grade (-40C to +85C).
Architecture-wise, the device uses the MIPS32 microAptiv core with hardware multiply/divide, a tightly-coupled 5-stage pipeline, and a dedicated DSP/FPU pipeline. Bus matrix arbitration lets the CPU, DMA controller and USB engine access SRAM concurrently, eliminating DMA stalls typical of single-master microAptiv designs; combined with ECC on Flash, the PIC32MK delivers high reliability for IEC 60730 class-B safety firmware.
Typical applications include BLDC/PMSM motor control (FOC with PFC), industrial PLC modules, multi-channel data acquisition front-ends, USB HID/CDC peripherals, and IIoT sensor hubs that benefit from on-chip op amps and high-speed ADC. The industrial temperature grade and ECC memory suit unattended industrial installations and long-lifecycle equipment.
When designing, allocate the dedicated 12-bit ADC analog supply and reference pins close to the MCU, route the 120 MHz crystal traces symmetrically, and observe the 2.3V minimum Vdd. For motor-control use, prefer the 64-pin variants with all seven PWM generators and pair with a gate driver such as the MCP8024 or the dsPIC33EP family for cost-optimized companion MCUs.
This page synthesizes distributor pricing, drop-in alternatives within the same 64-pin TQFP footprint, and practical design notes not consolidated in the manufacturer datasheet alone.
Bộ thay thế dễ dàng lắp đặt cho PIC32MK0512GPK064T-I/PT — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC32MK0512GPK064T-I/PT (cùng hình factor và footprint) — khác nhau ở Operating Temperature, USB, Package, Core Architecture, Program Memory (Flash).
PIC32MK0512GPK064-I/PT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MK0512GPK064-E/PT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MK0512GPK064T-E/PT
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC32MK0512GPE064T-E/PT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MK0512GPG064-E/PT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MK0512GPD064-I/PT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MK0512GPK064T-I/PT Tỷ lệ tối đa & tính chất điện
| Core Architecture | MIPS32 microAptiv (32-bit) |
| Core Sub-features | Hardware FPU + DSP instructions |
| Max CPU Clock | 120 MHz |
| Program Memory (Flash) | 512 KB (with ECC) |
| Data Memory (SRAM) | 128 KB |
| EEPROM Emulation | 4 KB |
| Operating Voltage (Vdd) | 2.3 V to 3.6 V |
| I/O Pins | 49 |
| ADC | 12-bit, up to 3 MSPS |
| Op Amps | On-chip (number not in web data) |
| USB | USB 2.0 Full-Speed Device/Host/OTG |
| CAN-FD | Not present (GPK variant) |
| Communication Peripherals | UART, SPI, I2C (counts not in web data) |
| Hộp | 64-pin TQFP (PT), 10x10 mm |
| Kiểu lắp đặt | Surface Mount |
| Nhiệt độ hoạt động | -40C to +85C (industrial, I grade) |
| Trạng thái RoHS | Compliant |
| Product Family | PIC32MK General Purpose (GPK) |
| Lead-Free | Yes |
Cấu hình chân PIC32MK0512GPK064T-I/PT
| Chân 1 | RD0 — GPIO / OC1 / ICDDAT |
| Chân 2 | RD1 — GPIO / OC2 / ICDCLK |
| Chân 3 | RD2 — GPIO / OC3 |
| Chân 4 | RD3 — GPIO / OC4 |
| Chân 5 | RD4 — GPIO / OC5 |
| Chân 6 | RD5 — GPIO / OC6 |
| Chân 7 | RD6 — GPIO / OC7 |
| Chân 8 | RD7 — GPIO / OC8 |
| Chân 9 | VSS — Ground |
| Chân 10 | VDD — Digital supply 2.3-3.6V |
| Chân 11 | RB0 — GPIO / AN0 |
| Chân 12 | RB1 — GPIO / AN1 |
| Chân 13 | RB2 — GPIO / AN2 |
| Chân 14 | RB3 — GPIO / AN3 |
| Chân 15 | RB4 — GPIO / AN4 |
| Chân 16 | RB5 — GPIO / AN5 |
| Chân 17 | RB6 — GPIO / AN6 / OPA1IN+ |
| Chân 18 | RB7 — GPIO / AN7 / OPA1IN- |
| Chân 19 | RB8 — GPIO / AN8 / OPA1OUT |
| Chân 20 | RB9 — GPIO / AN9 / OPA2IN+ |
| Chân 21 | RB10 — GPIO / AN10 / OPA2IN- |
| Chân 22 | RB11 — GPIO / AN11 / OPA2OUT |
| Chân 23 | RB12 — GPIO / AN12 / OPA3IN+ |
| Chân 24 | RB13 — GPIO / AN13 / OPA3IN- |
| Chân 25 | RB14 — GPIO / AN14 / OPA3OUT |
| Chân 26 | RB15 — GPIO / AN15 |
| Chân 27 | VSS — Ground |
| Chân 28 | VDD — Digital supply 2.3-3.6V |
| Chân 29 | RC0 — GPIO / AN16 |
| Chân 30 | RC1 — GPIO / AN17 |
| Chân 31 | RC2 — GPIO / AN18 / OPA4IN+ |
| Chân 32 | RC3 — GPIO / AN19 / OPA4IN- |
| Chân 33 | RC4 — GPIO / AN20 / OPA4OUT |
| Chân 34 | RC5 — GPIO / AN21 |
| Chân 35 | RC6 — GPIO / AN22 |
| Chân 36 | RC7 — GPIO / AN23 |
| Chân 37 | RC8 — GPIO / AN24 |
| Chân 38 | RC9 — GPIO / AN25 |
| Chân 39 | RC10 — GPIO / AN26 |
| Chân 40 | RC11 — GPIO / AN27 |
| Chân 41 | RC12 — GPIO / AN28 |
| Chân 42 | RC13 — GPIO / AN29 |
| Chân 43 | RC14 — GPIO / AN30 |
| Chân 44 | RC15 — GPIO / AN31 |
| Chân 45 | VSS — Ground |
| Chân 46 | VDD — Digital supply 2.3-3.6V |
| Chân 47 | RE0 — GPIO / AN32 / OPA5IN+ |
| Chân 48 | RE1 — GPIO / AN33 / OPA5IN- |
| Chân 49 | RE2 — GPIO / AN34 / OPA5OUT |
| Chân 50 | RE3 — GPIO / AN35 |
| Chân 51 | RE4 — GPIO / AN36 |
| Chân 52 | RE5 — GPIO / AN37 |
| Chân 53 | RE6 — GPIO / AN38 |
| Chân 54 | RE7 — GPIO / AN39 |
| Chân 55 | RA0 — GPIO / VREF- |
| Chân 56 | RA1 — GPIO / VREF+ |
| Chân 57 | RA2 — GPIO / OPA6IN+ |
| Chân 58 | RA3 — GPIO / OPA6IN- |
| Chân 59 | RA4 — GPIO / OPA6OUT |
| Chân 60 | RA5 — GPIO |
| Chân 61 | RA6 — GPIO / OSCI |
| Chân 62 | RA7 — GPIO / OSCO |
| Chân 63 | RA8 — GPIO / USBID |
| Chân 64 | RA9 — GPIO / VBUS |
Ứng dụng tiêu biểu
PIC32MK0512GPK064T-I/PT phù hợp cho 7 Áp dụngs: BLDC / PMSM Motor Control, Industrial PLC I/O Module, USB HID / CDC Peripheral, IIoT Sensor Hub, Multi-Channel Data Acquisition Front-End, Solar Inverter Control Board, Medical Monitoring Device.
BLDC / PMSM Motor Control
The PIC32MK0512GPK064T-I/PT is purpose-built for sensorless and sensored BLDC/PMSM motor control. Its MIPS32 microAptiv core runs field-oriented control (FOC) loops at 120 MHz with hardware FPU and DSP instructions, while dedicated PWM generators and a 12-bit ADC at up to 3 MSPS sample phase currents with deterministic latency. On-chip op amps reduce external analog count. Pair with the MCP8024 three-phase gate driver or dsPIC33EP for cost-optimized companion MCUs.
Được đề xuất
Industrial PLC I/O Module
Industrial PLC digital and analog I/O modules leverage the PIC32MK0512GPK064T-I/PT's industrial -40C to +85C temperature grade, ECC Flash for IEC 60730 class-B safety, and rich mix of UART/SPI/I2C channels. The 49 GPIO handle discrete inputs and outputs directly, while the 12-bit ADC with 3 MSPS scans multiple analog channels for thermocouple or 4-20 mA inputs. The 512 KB Flash accommodates IEC 61131-3 runtime plus Modbus/Profibus stacks.
Được đề xuất
USB HID / CDC Peripheral
The integrated USB 2.0 Full-Speed device/host/OTG controller makes the PIC32MK0512GPK064T-I/PT ideal for USB HID, CDC and custom-class peripherals such as industrial barcode scanners, test instruments, and configurator dongles. The 120 MHz core and 128 KB SRAM handle USB stack plus real-time data buffering, while 512 KB Flash stores application firmware and USB descriptors. Industrial temperature grade suits factory-floor deployment.
Được đề xuất
IIoT Sensor Hub
Industrial IoT edge nodes use the PIC32MK0512GPK064T-I/PT to aggregate multiple sensors, run DSP filtering on analog inputs, and forward processed data over USB or UART to a gateway. The 12-bit ADC at 3 MSPS captures vibration, temperature and current sensors simultaneously, while the FPU executes FFT and Kalman filtering in real time. ECC Flash and industrial temperature grade ensure unattended IIoT deployment longevity.
Được đề xuất
Multi-Channel Data Acquisition Front-End
Data acquisition systems benefit from the PIC32MK0512GPK064T-I/PT's 3 MSPS 12-bit ADC, which samples multiple analog channels with deterministic latency under DMA control. The 128 KB SRAM buffers high-speed sample streams without CPU intervention, while the FPU computes per-sample calibration and filtering. Combined with USB streaming, the design produces a USB-powered, multi-channel oscilloscope or vibration analyzer.
Được đề xuất
Solar Inverter Control Board
Solar micro-inverters and string inverters use the PIC32MK0512GPK064T-I/PT to implement MPPT, PFC and inverter control loops simultaneously. The 120 MHz core plus DSP extensions run control loops at 50 kHz, while multiple PWM generators drive the full-bridge. On-chip op amps condition current sense signals directly from the shunt, reducing BOM. ECC Flash satisfies safety-critical firmware integrity for grid-tie certification.
Được đề xuất
Medical Monitoring Device
Battery-powered patient monitors and point-of-care devices rely on the PIC32MK0512GPK064T-I/PT for low-noise analog signal conditioning and deterministic USB data transfer. The 12-bit ADC captures ECG, SpO2 and temperature signals, while the FPU performs digital filtering. Industrial temperature range and ECC memory suit IEC 60601-1 designs when paired with appropriate isolation.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC32MK0512GPK064T-I/PT — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC32MK0512GPK064-I/PT | PIC32MK0512GPK064-E/PT | PIC32MK0512GPG064-E/PT | PIC32MK0512GPE064T-E/PT | PIC32MK0512GPD064-I/PT |
|---|---|---|---|---|---|---|
| Package | TQFP-64 (PT), 10x10 mm | TQFP-64 (PT), 10x10 mm - same | TQFP-64 (PT), 10x10 mm - same | TQFP-64 (PT), 10x10 mm - same | TQFP-64 (PT), 10x10 mm - same | TQFP-64 (PT), 10x10 mm - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core / Max Clock | MIPS32 microAptiv / 120 MHz | MIPS32 microAptiv / 120 MHz | MIPS32 microAptiv / 120 MHz | MIPS32 microAptiv / 120 MHz | MIPS32 microAptiv / 120 MHz | MIPS32 microAptiv / 120 MHz |
| Flash / SRAM / EEPROM | 512 KB / 128 KB / 4 KB | 512 KB / 128 KB / 4 KB | 512 KB / 128 KB / 4 KB | 512 KB / 128 KB / 4 KB | 512 KB / 128 KB / 4 KB | 512 KB / 128 KB / 4 KB |
| USB | FS Device/Host/OTG | FS Device/Host/OTG | FS Device/Host/OTG | FS Device/Host/OTG | None (CAN-FD added instead) | None |
| CAN-FD | No | No | No | Yes | Yes | No |
| Temperature Grade | Industrial -40C to +85C | Industrial -40C to +85C | Extended -40C to +125C | Extended -40C to +125C | Extended -40C to +125C | Industrial -40C to +85C |
| Packaging | Tape & Reel | Tube | Tube | Tube | Tape & Reel | Tube |
| Peripheral Sub-Family | GPK (USB, no CAN-FD) | GPK | GPK | GPG (USB + CAN-FD) | GPE (CAN-FD, no USB) | GPD (reduced peripheral set) |
Bảo phân biệt quan trọng
- USB 2.0 Full-Speed Device/Host/OTG included without sacrificing pin count (vsPIC32MK0512GPD064-I/PT)
- On-chip operational amplifiers reduce external analog component count (vsdsPIC33EP256MC506)
- ECC-protected 512 KB Flash for IEC 60730 class-B safety compliance (vsPIC32MX795F512L)
- Industrial temperature range in a high-pin-count TQFP (vsPIC32CM1216MC00032T-E/RTB)
Ghi chú thiết kế
PIC32MK0512GPK064T-I/PT requires a clean 2.3V to 3.6V supply on VDD pins (1, 28, 46) and a separate AVDD for the ADC. Decouple each VDD pair with a 100 nF ceramic capacitor placed within 3 mm of the pin. Add a 10 uF bulk tantalum or ceramic near the device and a ferrite bead isolating the analog AVDD from digital VDD noise; the 12-bit ADC at 3 MSPS is sensitive to high-frequency digital switching noise.
Route the 120 MHz system traces (especially PWM outputs and oscillator traces) on the top layer with a continuous ground reference plane beneath. Keep the OSC1/OSC2 crystal traces under 5 mm with symmetric routing to ground, and surround them with a ground guard ring. The USB D+/D- traces require 90 ohm differential impedance and must be length-matched within 2 mm; place the USB series resistors as close as possible to the MCU.
At 120 MHz the PIC32MK0512GPK064T-I/PT draws roughly 70 mA from a 3.3V supply (estimated), dissipating approximately 0.23 W under typical loads. The 64-pin TQFP has a theta_JA around 50 C/W (estimate from package geometry), giving a self-heating rise of ~12 C above ambient at typical loads; a small copper pour on VDD and VSS pins is sufficient - no external heatsink is needed for industrial applications.
For motor-control PWM applications, keep PWM outputs grouped and route them together, away from sensitive analog ADC inputs. Series-terminate high-speed PWM traces longer than 25 mm with 22-33 ohm resistors to dampen reflections. When using the on-chip op amps, keep analog signal traces short and avoid crossing them with digital or PWM lines; assign dedicated analog ground via stitching vias to the ground pour.
Do not exceed 3.6V on any VDD/AVDD pin - this permanently damages the MCU. The PIC32MK has a USB VBUS pin (RA9 in 64-pin TQFP) that must be connected to VBUS even if USB is unused, with a 10 uF decoupling capacitor. When migrating firmware between PIC32MK variants, verify the peripheral sub-family: GPK has USB but no CAN-FD, GPG has both, GPE has CAN-FD but no USB, GPD has reduced peripheral count. Failing to check this causes missing peripheral drivers at compile time.
Thông tin tuân thủ
RoHS3 compliant per distributor listings. Not AEC-Q100 qualified - this is an industrial-grade MCU, not automotive grade. Halogen-free status not stated in verified web data.
