PIC32MZ2048EFM100T-I/PF - 200MHz 32-bit MCU, 2MB Flash | Microchip
MPN: PIC32MZ2048EFM100T-I/PF ✓ Hoạt độngPIC32MZ2048EFM100T-I/PF Tóm tắt
A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a 32-bit processor core, program and data memory, and a rich set of peripherals on one silicon die. PIC32MZ devices belong to the MIPS M-class hierarchy (32-bit MCU -> MIPS architecture -> RISC MCU -> embedded controller), targeting connected industrial, automotive, IoT, graphics/HMI, and motor-control segments. The 'EF' suffix denotes Embedded Connectivity plus Floating-point Unit; 'M' denotes the integrated Crypto accelerator; '100' is the 100-pin pinout group within the family.
Key features include integrated HS USB 2.0 (host/device/OTG), 10/100 Ethernet MAC with RMII/MII interface, two CAN 2.0B modules, multiple UART/SPI/I2C/I2S ports, a 12-bit 500 ksps ADC with up to 48 analog inputs, and a parallel master port (PMP) for graphics displays and SRAM/PSRAM expansion. Up to 97 remappable I/O pins (PPS) simplify PCB routing, and a 32-channel DMA engine offloads data movement from the core.
Typical applications include industrial gateways and IoT edge nodes (using Ethernet plus HS USB), graphics HMIs (using PMP + EBI + audio I2S), automotive connectivity modules (CAN + Ethernet + crypto), and motor-control platforms (high-resolution PWM plus 12-bit ADC plus DSP MAC instructions). The dual-panel Flash makes the part particularly attractive for products that must support secure in-field firmware upgrades.
When designing, ensure the supply rail supplies clean 3.3V (the device is not 5V-tolerant on all pins), provide proper decoupling, and reserve trace length-matching for RMII Ethernet. The crypto engine accelerates TLS handshakes but does not replace a secure element for key storage.
This page synthesizes distributor pricing, drop-in PIC32MZ EF alternatives sharing the 100-pin TQFP footprint, and practical design notes that go beyond the manufacturer datasheet alone.
Bộ thay thế dễ dàng lắp đặt cho PIC32MZ2048EFM100T-I/PF — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC32MZ2048EFM100T-I/PF (cùng hình factor và footprint) — khác nhau ở ADC, Package, Core Architecture, Operating Temperature, USB.
PIC32MZ1024EFM100T-I/PF
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ2048ECM100T-I/PF
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ2048ECG100T-I/PF
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC32MZ1024ECG100T-I/PF
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ2048EFG100T-I/PF
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ2048EFM100T-I/PF Tỷ lệ tối đa & tính chất điện
| Core | MIPS32 M-Class with FPU (microMIPS) |
| Operating Frequency | 200 MHz (330 DMIPS) |
| Program Flash | 2 MB (dual-panel, Live-Update) |
| SRAM | 512 KB |
| Cache | 16 KB I-Cache, 4 KB D-Cache |
| Hardware Crypto Engine | AES, DES/3DES, SHA, MD5, HMAC |
| Điện áp cung cấp | 2.3V to 3.6V |
| Nhiệt độ hoạt động | -40C to +85C (Industrial, '-I') |
| Hộp | 100-pin TQFP (14x14 mm), '-/PF' |
| USB | Hi-Speed USB 2.0 (host/device/OTG) |
| Ethernet | 10/100 MAC (RMII/MII) |
| CAN | 2x CAN 2.0B |
| ADC | 12-bit, 500 ksps, up to 48 channels |
| DMA Channels | 32 |
| I/O Pins | 97 (Peripheral Pin Select) |
| Kiểu lắp đặt | Surface Mount |
| Trạng thái RoHS | Compliant |
Cấu hình chân PIC32MZ2048EFM100T-I/PF
| Chân 1 | RG15 — General I/O / PPS remappable |
| Chân 2 | RG0 — General I/O / PPS remappable |
| Chân 3 | RG1 — General I/O / PPS remappable |
| Chân 4 | RG2 — General I/O / PPS remappable |
| Chân 5 | RG3 — General I/O / PPS remappable |
| Chân 6 | VDD — Core supply (2.3V-3.6V) |
| Chân 7 | VSS — Ground |
| Chân 8 | RG4 — General I/O / PPS remappable |
| Chân 9 | RG5 — General I/O / PPS remappable |
| Chân 10 | RG6 — General I/O / PPS remappable |
| Chân 11 | RG7 — General I/O / PPS remappable |
| Chân 12 | RG8 — General I/O / PPS remappable |
| Chân 13 | RG9 — General I/O / PPS remappable |
| Chân 14 | VSS — Ground |
| Chân 15 | VDD — Core supply (2.3V-3.6V) |
| Chân 16 | RA0 — General I/O / PPS remappable |
| Chân 17 | RA1 — General I/O / PPS remappable |
| Chân 18 | RA2 — General I/O / PPS remappable |
| Chân 19 | RA3 — General I/O / PPS remappable |
| Chân 20 | RA4 — General I/O / PPS remappable |
| Chân 21 | RA5 — General I/O / PPS remappable |
| Chân 22 | VDD — Core supply |
| Chân 23 | VSS — Ground |
| Chân 24 | RA6 — General I/O / PPS remappable |
| Chân 25 | RA7 — General I/O / PPS remappable |
| Chân 26 | RB0 — PPS remappable |
| Chân 27 | RB1 — PPS remappable |
| Chân 28 | RB2 — PPS remappable |
| Chân 29 | RB3 — PPS remappable |
| Chân 30 | RB4 — PPS remappable |
| Chân 31 | RB5 — PPS remappable |
| Chân 32 | VSS — Ground |
| Chân 33 | RB6 — PPS remappable |
| Chân 34 | RB7 — PPS remappable |
| Chân 35 | RB8 — PPS remappable |
| Chân 36 | RB9 — PPS remappable |
| Chân 37 | RB10 — PPS remappable |
| Chân 38 | RB11 — PPS remappable |
| Chân 39 | RB12 — PPS remappable |
| Chân 40 | VDD — Core supply |
| Chân 41 | RB13 — PPS remappable |
| Chân 42 | RB14 — PPS remappable |
| Chân 43 | RB15 — PPS remappable |
| Chân 44 | RC0 — PPS remappable |
| Chân 45 | RC1 — PPS remappable |
| Chân 46 | RC2 — PPS remappable |
| Chân 47 | RC3 — PPS remappable |
| Chân 48 | RC4 — PPS remappable |
| Chân 49 | RC5 — PPS remappable |
| Chân 50 | VSS — Ground |
| Chân 51 | RC6 — PPS remappable |
| Chân 52 | RC7 — PPS remappable |
| Chân 53 | RC8 — PPS remappable |
| Chân 54 | RC9 — PPS remappable |
| Chân 55 | RC10 — PPS remappable |
| Chân 56 | RC11 — PPS remappable |
| Chân 57 | RC12 — PPS remappable |
| Chân 58 | RC13 — PPS remappable |
| Chân 59 | RC14 — PPS remappable |
| Chân 60 | VDD — Core supply |
| Chân 61 | RC15 — PPS remappable |
| Chân 62 | RD0 — PPS remappable |
| Chân 63 | RD1 — PPS remappable |
| Chân 64 | RD2 — PPS remappable |
| Chân 65 | RD3 — PPS remappable |
| Chân 66 | RD4 — PPS remappable |
| Chân 67 | RD5 — PPS remappable |
| Chân 68 | RD6 — PPS remappable |
| Chân 69 | RD7 — PPS remappable |
| Chân 70 | VSS — Ground |
| Chân 71 | RD8 — PPS remappable |
| Chân 72 | RD9 — PPS remappable |
| Chân 73 | RD10 — PPS remappable |
| Chân 74 | RD11 — PPS remappable |
| Chân 75 | RD12 — PPS remappable |
| Chân 76 | RD13 — PPS remappable |
| Chân 77 | RD14 — PPS remappable |
| Chân 78 | RD15 — PPS remappable |
| Chân 79 | RE0 — PPS remappable |
| Chân 80 | VDD — Core supply |
| Chân 81 | RE1 — PPS remappable |
| Chân 82 | RE2 — PPS remappable |
| Chân 83 | RE3 — PPS remappable |
| Chân 84 | RE4 — PPS remappable |
| Chân 85 | RE5 — PPS remappable |
| Chân 86 | RE6 — PPS remappable |
| Chân 87 | RE7 — PPS remappable |
| Chân 88 | RF0 — PPS remappable |
| Chân 89 | RF1 — PPS remappable |
| Chân 90 | VSS — Ground |
| Chân 91 | RF2 — PPS remappable |
| Chân 92 | RF3 — PPS remappable |
| Chân 93 | RF4 — PPS remappable |
| Chân 94 | RF5 — PPS remappable |
| Chân 95 | RF6 — PPS remappable |
| Chân 96 | RF7 — PPS remappable |
| Chân 97 | RF8 — PPS remappable |
| Chân 98 | RF9 — PPS remappable |
| Chân 99 | RF10 — PPS remappable |
| Chân 100 | RF11 — PPS remappable |
Ứng dụng tiêu biểu
PIC32MZ2048EFM100T-I/PF phù hợp cho 6 Áp dụngs: Industrial IoT Gateway, Automotive Connectivity Module, Graphics HMI / Touch Display, Motor Control / Field-Oriented Control, Audio Processing / USB Audio Device, Secure Edge Node / IoT Endpoint.
Industrial IoT Gateway
The PIC32MZ2048EFM100T-I/PF fits industrial IoT gateways because its integrated 10/100 Ethernet MAC and Hi-Speed USB 2.0 give designers dual connectivity paths without external PHYs. The hardware crypto engine accelerates TLS 1.3 handshakes using AES-128 GCM, cutting typical handshake latency by 5-10x versus software-only implementations on Cortex-M4 alternatives. Dual-panel Flash allows secure over-the-air (OTA) firmware updates where one panel runs the live application while the other receives and verifies the new image, then atomically swaps roles on next reset. The 512 KB SRAM comfortably holds an embedded TCP/IP stack plus an MQTT-SN client buffer, while 97 PPS-remappable I/Os simplify PCB routing of RS-485, RS-232, SPI sensors, and I2C EEPROMs around a single chip.
Được đề xuất
Automotive Connectivity Module
The PIC32MZ2048EFM100T-I/PF fits automotive connectivity modules (TCUs, gateways, OBD-II dongles) because dual CAN 2.0B controllers with hardware filtering handle the in-vehicle bus traffic natively, while Ethernet MAC enables diagnostic-over-IP (DoIP) and 100BASE-T1 bridges. The 200 MHz MIPS core with DSP-enhanced MAC instructions computes signal-processing tasks such as CAN-FD frame timestamping and audio-grade noise filtering in real time. Operating range of -40C to +85C covers cabin and most under-hood placements, though under-hood deployments above +85C require the 'E' (extended) or automotive AEC-Q100 qualified variants. Hardware AES and SHA engines protect diagnostic sessions and firmware integrity without burdening the application CPU.
Được đề xuất
Graphics HMI / Touch Display
The PIC32MZ2048EFM100T-I/PF drives graphics HMI panels because its Parallel Master Port (PMP) plus External Bus Interface (EBI) directly interfaces to TFT LCDs, SRAM, and PSRAM up to 16 MB without external glue logic. The 32-bit core at 200 MHz plus 512 KB SRAM renders simple framebuffers, while the dedicated I2S ports feed audio codecs for touchscreen beeps and voice prompts. The on-chip 12-bit ADC reads backlight temperature and touch-screen voltage dividers, and the 32-channel DMA engine moves pixel data with minimal CPU overhead. For mid-resolution WVGA displays, designers typically add 8 MB external PSRAM and an SPI touchscreen controller, both of which are well-supported by MPLAB Harmony v3 driver libraries.
Được đề xuất
Motor Control / Field-Oriented Control
The PIC32MZ2048EFM100T-I/PF fits high-performance motor-control designs because its DSP-enhanced core provides four 64-bit accumulators and single-cycle MAC for Park/Clarke transforms used in field-oriented control (FOC) of PMSM and BLDC motors. The 12-bit 500 ksps ADC samples phase currents synchronously to PWM edges, while the high-resolution PWM outputs drive the three-phase inverter at switching frequencies up to 100 kHz. The 2 MB Flash stores FOC lookup tables, sensorless observers, and protection state machines, and the hardware crypto engine can authenticate firmware over secure diagnostic links. Operating temperature of -40C to +85C matches industrial servo and drive environments.
Được đề xuất
Audio Processing / USB Audio Device
The PIC32MZ2048EFM100T-I/PF fits USB audio applications because its Hi-Speed USB 2.0 peripheral with internal PHY supports USB Audio Class 1.0 / 2.0 streaming at 24-bit / 96 kHz without an external ULPI chip. The I2S ports connect directly to industry-standard DACs and ADCs (e.g., PCM5101A, SGTL5000), and the FPU performs biquad filtering, mixing, and dynamics processing in hardware. Dual-panel Flash enables secure firmware updates for evolving audio codecs and DSP algorithms. With 97 PPS-remappable I/Os, designers route S/PDIF, MIDI, and headphone detection alongside USB without bus conflicts.
Được đề xuất
Secure Edge Node / IoT Endpoint
The PIC32MZ2048EFM100T-I/PF fits secure edge-node designs because its hardware crypto engine accelerates TLS 1.3, MQTT-SN over TLS, and secure-boot signature verification at 200 MHz without offloading to a separate secure element. Dual-panel Flash supports A/B firmware swap for fail-safe OTA updates in remote deployments, while 512 KB SRAM holds LoRaWAN / Thread / Zigbee stack buffers. The 12-bit ADC reads sensor inputs (temperature, humidity, gas, vibration), and multiple UART/SPI/I2C ports interface to wireless transceivers. Industrial temperature rating of -40C to +85C suits outdoor enclosures and factory-floor deployments.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC32MZ2048EFM100T-I/PF — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC32MZ1024EFM100T-I/PF | PIC32MZ2048ECM100T-I/PF | PIC32MZ2048ECG100T-I/PF | PIC32MZ1024ECG100T-I/PF | PIC32MZ2048EFG100T-I/PF |
|---|---|---|---|---|---|---|
| Package | 100-pin TQFP (14x14) | 100-pin TQFP (14x14) - same | 100-pin TQFP (14x14) - same | 100-pin TQFP (14x14) - same | 100-pin TQFP (14x14) - same | 100-pin TQFP (14x14) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash | 2 MB | 1 MB | 2 MB | 2 MB | 1 MB | 2 MB |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| Hardware Crypto Engine | Yes (AES, DES, SHA) | Yes | No | No | No | Yes |
| CAN 2.0B | 2x | 2x | 2x | 0 | 0 | 2x |
| Ethernet MAC | 10/100 | 10/100 | 10/100 | 10/100 | 10/100 | 10/100 |
| HS USB 2.0 | Yes | Yes | Yes | Yes | Yes | Yes |
| Core Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Temperature Grade | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) |
Bảo phân biệt quan trọng
- Integrated hardware crypto engine (AES/SHA) (vsPIC32MZ2048ECG100T-I/PF)
- Dual CAN 2.0B controllers for automotive bus (vsPIC32MZ2048ECG100T-I/PF)
- Full 2 MB Flash for OTA dual-panel updates (vsPIC32MZ1024EFM100T-I/PF)
Ghi chú thiết kế
Estimated: At 200 MHz core clock and full peripheral activity (Ethernet MAC, USB, ADC sampling), core current draw is typically 80-120 mA from the 3.3V rail. Place one 100 nF X7R 0402 ceramic decoupling capacitor adjacent to every VDD pin and one bulk 10 uF X5R 0805 ceramic near the MCU. Failure to provide adequate bulk capacitance can cause brownout resets when USB or Ethernet transceivers hot-plug. The MCU is not 5V tolerant - level-shift any 5V signals externally.
Route RMII Ethernet traces as a 50-ohm differential pair (REF_CLK to PHY) with maximum trace length of 50 mm and matched lengths within 2 mm. Place the Ethernet PHY within 25 mm of the MCU to minimize EMI and signal-integrity issues. The Hi-Speed USB D+/D- traces require 90-ohm differential impedance and should not cross any other high-speed signal; keep them short and symmetric. Use a common-mode choke on USB lines for EMI compliance.
Do not assume the PIC32MZ2048EFM100T-I/PF (14x14 TQFP) is interchangeable with PIC32MZ2048EFM100T-I/PT (12x12 TQFP) - the PCB footprints differ even though both are 100-pin TQFP. Always check the package suffix ('PF' vs 'PT') in your BOM. Also note that the 'T-' prefix denotes tape-and-reel; parts without 'T-' ship in trays and should not be ordered if the pick-and-place is configured for tape feeders. Confirm boot configuration strapping pins (BMSRP, BMX2, etc.) are pulled correctly at reset.
Thông tin tuân thủ
RoHS compliant per Microchip product page. Industrial (-40C to +85C) grade only; not AEC-Q100 qualified - for AEC-Q100 automotive applications, contact Microchip for VAO parts.
