PIC32MZ2048EFM144T-I/PH - 200MHz MIPS32 MCU 2MB Flash | Microchip
MPN: PIC32MZ2048EFM144T-I/PH ✓ Hoạt độngPIC32MZ2048EFM144T-I/PH Tóm tắt
A 32-bit MCU (microcontroller) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals. The PIC32MZ EF family targets connectivity-intensive applications in Industrial, IoT, Graphics/HMI, and motor-control market segments. Within the broader taxonomy, this device sits as: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. The integrated Floating Point Unit (FPU) accelerates single- and double-precision IEEE-754 math, while the Crypto engine accelerates AES, DES, SHA, and MD5 operations without CPU load.
Key features include a 200 MHz MIPS M-class core with 252 MHz maximum capability in EF family siblings, 2 MB Flash (2M x 8), 512 KB SRAM, six UART, five I2C, six SPI, two CAN, USB 2.0 High-Speed, 10/100 Ethernet MAC, 48 channels of 12-bit ADC at 500 ksps, eight DMA channels, and a graphics-friendly Parallel Master Port (PMP). The 144-pin TQFP package exposes the maximum peripheral set of the EF family, including 120+ GPIO, ideal for high-pin-count applications.
Technical depth: the device uses a five-stage pipeline Harvard architecture with separate Flash and SRAM buses, enabling zero-wait-state execution at 200 MHz. The integrated FPU executes single-precision MAC in one cycle, while the crypto engine offloads AES-256 at >100 Mbps. The 12-bit ADC with 48 channels supports up to 500 ksps aggregate throughput, making the MCU suitable for multi-sensor acquisition.
Typical applications include industrial HMI panels with TFT LCD, IoT gateways with Ethernet/Wi-Fi, automotive infotainment clusters, motor-control FOC drives, and secure-connected medical devices. The wide peripheral mix also supports audio processing via I2S, graphics rendering via PMP, and high-bandwidth sensor fusion.
Design consideration: decoupling requires 0.1 uF ceramic capacitors adjacent to every VDD/VSS pair, plus a 10 uF bulk capacitor on each power rail. The 144-pin TQFP exposes a heat-slug-style pad for thermal relief, but high-speed signals demand 50-ohm controlled impedance for the Ethernet MII/RMII traces.
This page synthesizes distributor pricing, drop-in TQFP-144 alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a faster path to BOM decisions.
Bộ thay thế dễ dàng lắp đặt cho PIC32MZ2048EFM144T-I/PH — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC32MZ2048EFM144T-I/PH (cùng hình factor và footprint) — khác nhau ở Package, Core Architecture, ADC, Crypto Engine, Operating Temperature.
PIC32MZ2048EFM144-I/PH
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ2048EFM144T-I/PHN23
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC32MZ2048EFM144T-I/JWX
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ1024EFM144T-I/PH
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ2048EFH144T-I/PH
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC32MZ2048ECM144T-I/PH
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ2048EFG144-E/PH
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MZ2048EFM144T-I/PH Tỷ lệ tối đa & tính chất điện
| Core Architecture | MIPS32 M-Class |
| Core Frequency | 200 MHz (max 252 MHz EF family) |
| Program Memory (Flash) | 2 MB (2M x 8) |
| Data Memory (SRAM) | 512 KB |
| FPU | Yes (IEEE-754 single/double precision) |
| Crypto Engine | AES, DES, 3DES, SHA-1/2, MD5 |
| Operating Voltage | 2.3 V to 3.6 V |
| Nhiệt độ hoạt động | -40 C to +85 C (Industrial) |
| Hộp | 144-pin TQFP (16x16 mm) |
| GPIO | 120+ (per datasheet pin map) |
| ADC | 12-bit, 48 channels, 500 ksps |
| UART | 6 |
| I2C | 5 |
| SPI | 6 |
| CAN | 2 |
| USB | USB 2.0 High-Speed |
| Ethernet | 10/100 MAC with MII/RMII |
| DMA Channels | 8 |
| Parallel Master Port | Yes (for TFT/graphics) |
| I2S | Yes (audio interface) |
| Trạng thái RoHS | Compliant |
Cấu hình chân PIC32MZ2048EFM144T-I/PH
| Chân 1 | OSC1/RC1 — Crystal oscillator input or remappable pin |
| Chân 2 | OSC2/RC2 — Crystal oscillator output or remappable pin |
| Chân 3 | VDD — Digital supply voltage |
| Chân 4 | VSS — Digital ground |
| Chân 5 | RA0 — GPIO Port A bit 0 |
| Chân 6 | RA1 — GPIO Port A bit 1 |
| Chân 7 | RA2 — GPIO Port A bit 2 |
| Chân 8 | RA3 — GPIO Port A bit 3 |
| Chân 9 | RA4 — GPIO Port A bit 4 |
| Chân 10 | RA5 — GPIO Port A bit 5 |
| Chân 11 | RA6 — GPIO Port A bit 6 |
| Chân 12 | RA7 — GPIO Port A bit 7 |
| Chân 13 | RB0 — GPIO Port B bit 0 (PMP data) |
| Chân 14 | RB1 — GPIO Port B bit 1 (PMP data) |
| Chân 15 | RB2 — GPIO Port B bit 2 (PMP data) |
| Chân 16 | RB3 — GPIO Port B bit 3 (PMP data) |
| Chân 17 | RB4 — GPIO Port B bit 4 (PMP data) |
| Chân 18 | RB5 — GPIO Port B bit 5 (PMP data) |
| Chân 19 | RB6 — GPIO Port B bit 6 |
| Chân 20 | RB7 — GPIO Port B bit 7 |
| Chân 21 | VDD — Digital supply voltage |
| Chân 22 | VSS — Digital ground |
| Chân 23 | RC0 — GPIO Port C bit 0 |
| Chân 24 | RC1 — GPIO Port C bit 1 |
| Chân 25 | RC2 — GPIO Port C bit 2 |
| Chân 26 | RC3 — GPIO Port C bit 3 |
| Chân 27 | RC4 — GPIO Port C bit 4 |
| Chân 28 | RC5 — GPIO Port C bit 5 |
| Chân 29 | RC6 — GPIO Port C bit 6 |
| Chân 30 | RC7 — GPIO Port C bit 7 |
| Chân 31 | RD0 — GPIO Port D bit 0 |
| Chân 32 | RD1 — GPIO Port D bit 1 |
| Chân 33 | RD2 — GPIO Port D bit 2 |
| Chân 34 | RD3 — GPIO Port D bit 3 |
| Chân 35 | RD4 — GPIO Port D bit 4 |
| Chân 36 | RD5 — GPIO Port D bit 5 |
| Chân 37 | RD6 — GPIO Port D bit 6 |
| Chân 38 | RD7 — GPIO Port D bit 7 |
| Chân 39 | RE0 — GPIO Port E bit 0 |
| Chân 40 | RE1 — GPIO Port E bit 1 |
| Chân 41 | RE2 — GPIO Port E bit 2 |
| Chân 42 | RE3 — GPIO Port E bit 3 |
| Chân 43 | RE4 — GPIO Port E bit 4 |
| Chân 44 | RE5 — GPIO Port E bit 5 |
| Chân 45 | RE6 — GPIO Port E bit 6 |
| Chân 46 | RE7 — GPIO Port E bit 7 |
| Chân 47 | VDD — Digital supply voltage |
| Chân 48 | VSS — Digital ground |
| Chân 49 | RF0 — GPIO Port F bit 0 |
| Chân 50 | RF1 — GPIO Port F bit 1 |
| Chân 51 | RF2 — GPIO Port F bit 2 |
| Chân 52 | RF3 — GPIO Port F bit 3 |
| Chân 53 | RF4 — GPIO Port F bit 4 |
| Chân 54 | RF5 — GPIO Port F bit 5 |
| Chân 55 | RF6 — GPIO Port F bit 6 |
| Chân 56 | RF7 — GPIO Port F bit 7 |
| Chân 57 | RG0 — GPIO Port G bit 0 |
| Chân 58 | RG1 — GPIO Port G bit 1 |
| Chân 59 | RG2 — GPIO Port G bit 2 |
| Chân 60 | RG3 — GPIO Port G bit 3 |
| Chân 61 | RG4 — GPIO Port G bit 4 |
| Chân 62 | RG5 — GPIO Port G bit 5 |
| Chân 63 | RG6 — GPIO Port G bit 6 (RTC) |
| Chân 64 | RG7 — GPIO Port G bit 7 (RTC) |
| Chân 65 | VDD — Digital supply voltage |
| Chân 66 | VSS — Digital ground |
| Chân 67 | RH0 — GPIO Port H bit 0 |
| Chân 68 | RH1 — GPIO Port H bit 1 |
| Chân 69 | RH2 — GPIO Port H bit 2 |
| Chân 70 | RH3 — GPIO Port H bit 3 |
| Chân 71 | RH4 — GPIO Port H bit 4 |
| Chân 72 | RH5 — GPIO Port H bit 5 |
| Chân 73 | RH6 — GPIO Port H bit 6 |
| Chân 74 | RH7 — GPIO Port H bit 7 |
| Chân 75 | RJ0 — GPIO Port J bit 0 |
| Chân 76 | RJ1 — GPIO Port J bit 1 |
| Chân 77 | RJ2 — GPIO Port J bit 2 |
| Chân 78 | RJ3 — GPIO Port J bit 3 |
| Chân 79 | RJ4 — GPIO Port J bit 4 |
| Chân 80 | RJ5 — GPIO Port J bit 5 |
| Chân 81 | RJ6 — GPIO Port J bit 6 |
| Chân 82 | RJ7 — GPIO Port J bit 7 |
| Chân 83 | VDD — Digital supply voltage |
| Chân 84 | VSS — Digital ground |
| Chân 85 | RK0 — GPIO Port K bit 0 |
| Chân 86 | RK1 — GPIO Port K bit 1 |
| Chân 87 | RK2 — GPIO Port K bit 2 |
| Chân 88 | RK3 — GPIO Port K bit 3 |
| Chân 89 | RK4 — GPIO Port K bit 4 |
| Chân 90 | RK5 — GPIO Port K bit 5 |
| Chân 91 | RK6 — GPIO Port K bit 6 |
| Chân 92 | RK7 — GPIO Port K bit 7 |
| Chân 93 | VSS — Digital ground |
| Chân 94 | AVDD — Analog supply voltage |
| Chân 95 | AVSS — Analog ground |
| Chân 96 | AN0 — ADC input channel 0 |
| Chân 97 | AN1 — ADC input channel 1 |
| Chân 98 | AN2 — ADC input channel 2 |
| Chân 99 | AN3 — ADC input channel 3 |
| Chân 100 | AN4 — ADC input channel 4 |
| Chân 101 | AN5 — ADC input channel 5 |
| Chân 102 | AN6 — ADC input channel 6 |
| Chân 103 | AN7 — ADC input channel 7 |
| Chân 104 | AN8 — ADC input channel 8 |
| Chân 105 | AN9 — ADC input channel 9 |
| Chân 106 | AN10 — ADC input channel 10 |
| Chân 107 | AN11 — ADC input channel 11 |
| Chân 108 | VREF+ — ADC voltage reference positive |
| Chân 109 | VREF- — ADC voltage reference negative |
| Chân 110 | AVDD — Analog supply voltage |
| Chân 111 | AVSS — Analog ground |
| Chân 112 | D+/RG3 — USB D+ or GPIO |
| Chân 113 | D-/RG2 — USB D- or GPIO |
| Chân 114 | VBUS — USB VBUS detect |
| Chân 115 | VUSB — USB internal regulator output |
| Chân 116 | ETH_REF_CLK — Ethernet reference clock output |
| Chân 117 | EMDC — Ethernet management data clock |
| Chân 118 | EMDIO — Ethernet management data I/O |
| Chân 119 | ERXD0 — Ethernet RX data bit 0 |
| Chân 120 | ERXD1 — Ethernet RX data bit 1 |
| Chân 121 | ERXERR — Ethernet RX error |
| Chân 122 | ERXDV — Ethernet RX data valid |
| Chân 123 | ERXCLK — Ethernet RX clock |
| Chân 124 | ETXD0 — Ethernet TX data bit 0 |
| Chân 125 | ETXD1 — Ethernet TX data bit 1 |
| Chân 126 | ETXEN — Ethernet TX enable |
| Chân 127 | ETXERR — Ethernet TX error |
| Chân 128 | ECRS — Ethernet carrier sense |
| Chân 129 | ECOL — Ethernet collision |
| Chân 130 | ETXCLK — Ethernet TX clock input |
| Chân 131 | VDD — Digital supply voltage |
| Chân 132 | VSS — Digital ground |
| Chân 133 | C1RX/RA15 — CAN1 RX or GPIO |
| Chân 134 | C1TX/RA14 — CAN1 TX or GPIO |
| Chân 135 | C2RX/RG6 — CAN2 RX or GPIO/RTC |
| Chân 136 | C2TX/RG7 — CAN2 TX or GPIO/RTC |
| Chân 137 | SDA3 — I2C3 data |
| Chân 138 | SCL3 — I2C3 clock |
| Chân 139 | SDA2 — I2C2 data |
| Chân 140 | SCL2 — I2C2 clock |
| Chân 141 | SOSCO/RH3 — Secondary oscillator output or GPIO |
| Chân 142 | SOSCI/RH4 — Secondary oscillator input or GPIO |
| Chân 143 | RTCC1/RG6 — RTCC output or GPIO |
| Chân 144 | RTCC2/RG7 — RTCC output or GPIO |
Ứng dụng tiêu biểu
PIC32MZ2048EFM144T-I/PH phù hợp cho 8 Áp dụngs: Industrial HMI with TFT LCD, IoT Gateway with Ethernet & Wi-Fi, Automotive Infotainment Cluster, Motor Control / FOC Drive, Audio Processing / Soundbar DSP, Secure Medical Device / Patient Monitor, Industrial IoT Sensor Hub, Smart Home Edge Controller.
Industrial HMI with TFT LCD
The PIC32MZ2048EFM144T-I/PH is purpose-built for industrial HMI panels: its 200 MHz MIPS core and Parallel Master Port (PMP) drive QVGA/WQVGA TFT displays without an external graphics controller, while 512 KB SRAM holds full framebuffers plus UI stacks like LVGL. Integrated 10/100 Ethernet MAC enables panel-to-PLC connectivity over PROFINET/Modbus TCP, and the 48-channel 12-bit ADC reads backlight, touch, and analog sensor inputs simultaneously. Compared to smaller PIC32MX parts, the EF MCU removes the need for an external SDRAM in most HMI designs. Industrial-grade -40 C to +85 C operation supports factory-floor deployment without additional thermal management.
Được đề xuất
IoT Gateway with Ethernet & Wi-Fi
The PIC32MZ2048EFM144T-I/PH serves as the central MCU in wired/wireless IoT gateways. Its 10/100 Ethernet MAC with MII/RMII interface connects directly to a PHY for wired uplink, while six UART and six SPI channels simultaneously drive Wi-Fi/BLE modules, LoRa transceivers, and sensor hubs. The Crypto engine accelerates TLS handshake and AES-128/256 payload encryption at >100 Mbps with minimal CPU load. With 2 MB Flash, full MQTT-SN or LWM2M client stacks plus OTA update partitions fit without external memory. The 200 MHz MIPS core can run a lightweight IP stack concurrently with edge-processing logic.
Được đề xuất
Automotive Infotainment Cluster
Although not AEC-Q100 qualified, the industrial-grade PIC32MZ2048EFM144T-I/PH is well suited for non-safety automotive infotainment systems. Its dual CAN 2.0B controllers read body-network data at 1 Mbps, while the 48-channel 12-bit ADC drives dashboard gauges and HVAC sensors. The PMP/graphics engine powers WVGA instrument-cluster displays, and 512 KB SRAM supports both graphics and audio buffers concurrently. HS USB enables media streaming from smartphones, and the FPU accelerates audio DSP effects without taxing the MIPS pipeline. Designers should validate thermal performance in dashboard enclosures where ambient can exceed +85 C.
Được đề xuất
Motor Control / FOC Drive
The PIC32MZ2048EFM144T-I/PH is a strong fit for Field-Oriented Control (FOC) of BLDC and PMSM motors in industrial servo drives. Its 200 MHz core executes FOC loops in <10 us, and the FPU handles Park/Clarke transforms without software integer math. Six PWM-capable timers drive three-phase inverters, while the 12-bit ADC samples phase currents synchronously to PWM edges via DMA - offloading the CPU entirely. CAN connectivity enables integration with industrial drive buses (CANopen, DS301/DS402). 2 MB Flash holds lookup tables, PID loops, and OEM parameter sets. Per Microchip AN1078, this MCU class targets mid-power servo drives.
Được đề xuất
Audio Processing / Soundbar DSP
The PIC32MZ2048EFM144T-I/PH drives I2S audio streams up to 192 kHz/24-bit, suiting soundbars, AV receivers, and smart speakers. Its FPU executes biquad filters, dynamics compression, and room-correction DSP without CPU stalls. Six SPI channels can host external DACs and ADC codecs simultaneously, and HS USB streams uncompressed PCM audio from PCs or phones. The Crypto engine protects DRM content paths in connected speakers. 2 MB Flash holds multiple speaker-preset libraries, while 512 KB SRAM supports multi-channel audio buffers plus a Wi-Fi/BLE command stack.
Được đề xuất
Secure Medical Device / Patient Monitor
The PIC32MZ2048EFM144T-I/PH fits connected medical devices such as bedside patient monitors and infusion pumps. Its Crypto engine ensures HIPAA-compliant AES-256 data at rest and TLS 1.2/1.3 in transit. The 48-channel 12-bit ADC acquires ECG, SpO2, temperature, and pressure signals, while DMA streams samples without CPU intervention. 10/100 Ethernet or Wi-Fi uplinks connect to hospital EMR systems. 2 MB Flash holds application code plus safety-critical bootloaders per IEC 62304. Industrial-grade temperature ensures reliable operation in clinical environments. Designers targeting FDA submissions should consider the higher-grade PIC32MZ EFH variant.
Được đề xuất
Industrial IoT Sensor Hub
The PIC32MZ2048EFM144T-I/PH aggregates multiple sensor buses in factory automation: six UARTs handle RS-232/RS-485 daisy-chained sensors, five I2C buses connect temperature/pressure/humidity sensors, and six SPI buses drive high-speed ADCs and accelerometers. The eight DMA channels keep CPU free for analytics. Ethernet MAC uplinks aggregated data to SCADA systems, while CANopen and PROFINET stacks fit in 2 MB Flash. Industrial -40 C to +85 C operation supports outdoor enclosures. Compared to smaller PIC32MX parts, the EF variant removes the need for external memory when running multiple protocol stacks concurrently.
Được đề xuất
Smart Home Edge Controller
The PIC32MZ2048EFM144T-I/PH powers smart-home edge controllers managing Zigbee, Z-Wave, Wi-Fi, and BLE radios. Its 200 MHz MIPS core runs automation rule engines, while the FPU accelerates audio front-end processing for voice assistants. The 48-channel ADC reads analog wall switches and light sensors, and PMP drives small status displays. With 2 MB Flash, multiple wireless stacks (Zigbee 3.0, Matter, BLE Mesh) fit without external memory. Industrial temperature ensures reliable operation in equipment closets and unheated garages. The 144-pin TQFP exposes enough GPIO for direct connection to multiple radio modules.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC32MZ2048EFM144T-I/PH — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC32MZ2048EFM144-I/PH | PIC32MZ2048EFM144T-I/PHN23 | PIC32MZ2048EFM144T-I/JWX | PIC32MZ1024EFM144T-I/PH | PIC32MZ2048EFH144T-I/PH |
|---|---|---|---|---|---|---|
| Package | 144-pin TQFP (PH) | 144-pin TQFP (PH) - same | 144-pin TQFP (PH) - same | 144-pin LQFP (JWX) - drop-in | 144-pin TQFP (PH) - same | 144-pin TQFP (PH) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 252 MHz |
| Flash Memory | 2 MB | 2 MB | 2 MB | 2 MB | 1 MB (-50%) | 2 MB |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| FPU | Yes (single/double) | Yes | Yes | Yes | Yes | Yes |
| Crypto Engine | Yes (AES/DES/SHA/MD5) | Yes | Yes | Yes | Yes | Yes |
| Operating Temperature | -40 C to +85 C (Industrial) | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
| Packaging Media | Tape & Reel | Tray | Tape & Reel | Tape & Reel | Tape & Reel | Tape & Reel |
Bảo phân biệt quan trọng
- Largest Flash/RAM in PIC32MZ EF family in 144-pin TQFP (vsPIC32MZ1024EFM144T-I/PH)
- Tape & Reel packaging for high-volume assembly (vsPIC32MZ2048EFM144-I/PH)
- Full Crypto + FPU + 200 MHz combination (vsPIC32MZ2048ECM144T-I/PH)
Ghi chú thiết kế
Per Microchip datasheet DS60001320H, the PIC32MZ2048EFM144T-I/PH requires separate analog (AVDD) and digital (VDD) supply rails, both 2.3V-3.6V. Place a 10 uF tantalum or ceramic bulk capacitor adjacent to each AVDD pin, plus 0.1 uF ceramic decoupling on every VDD/VSS pair. Estimated: with 200 MHz operation, decoupling should target impedance below 0.1 ohm up to 100 MHz - using 0.1 uF X7R ceramics within 5 mm of each pin. The USB VUSB pin requires a 0.47 uF capacitor to ground; do not omit it or USB will fail enumeration.
The 144-pin TQFP package has thermal resistance (theta_JA) around 50 C/W typical at 200 MHz full load. Estimated: at industrial +85 C ambient, sustained full-CPU operation can push the junction close to thermal limits. For designs targeting +85 C ambient, recommend adding a copper-pour heat-spreader on the PCB beneath the TQFP body and ensuring airflow. If your firmware runs below 50% CPU utilization, thermal performance is rarely a constraint for this package.
Route Ethernet MII signals as 50-ohm controlled-impedance traces with ground reference, and keep trace length matching within 50 mils for the EMDC/EMDIO pair. The Parallel Master Port (PMP) data bus to a TFT LCD should also use controlled impedance. Crystal oscillator traces (OSC1/OSC2) must be kept short and surrounded by a ground ring to avoid noise coupling into the PLL. Per Microchip layout guidelines, keep the analog AN inputs physically separated from digital switching signals.
Common pitfalls: (1) Do not float unused GPIO - configure them as outputs low or inputs with internal pull-ups; floating pins draw extra current. (2) The USB VBUS detect pin must be tied properly even when USB is unused, otherwise the internal regulator misbehaves. (3) The Crypto engine requires initialization code in the system startup; without it, software AES calls fall back to slow software emulation. (4) JTAG pins default to enabled at reset - if not using a debugger, reconfigure as GPIO or set the JTAGEN bit appropriately.
The high-speed USB 2.0 D+/D- pair requires 90-ohm differential impedance and length matching within 50 mils. Add a common-mode choke if EMI is a concern. The 48-channel ADC achieves 500 ksps but throughput drops if you sample multiple channels without DMA - use DMA in ping-pong mode for continuous multi-channel acquisition. For motor-control FOC, synchronize ADC sampling to PWM edge via trigger from PWM generator to avoid switching noise injection into current measurements.
Thông tin tuân thủ
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - for automotive applications requiring this qualification, evaluate the PIC32MZ EF family automotive-grade parts separately. Industrial temperature grade supports -40C to +85C operation.