R5F107ACGSP - RL78/I1A 32MHz 32KB Flash MCU | Renesas
MPN: R5F107ACGSP ✓ Hoạt độngR5F107ACGSP Tóm tắt
An RL78 microcontroller (MCU) is a low-power 16-bit CISC architecture from Renesas designed for ultra-low-power embedded applications, particularly in consumer, lighting, and home appliance segments. RL78 parts are widely adopted in the True Low Power Platform family, offering 1.6 V to 5.5 V wide operating voltage, multiple low-power modes (HALT, STOP, SNOOZE), and rich peripheral sets including timers, A/D converters, and communication interfaces. The RL78/I1A sub-family specifically targets LED lighting with high-resolution PWM, 3-channel high-side constant-current drivers, and dithering — features unavailable in the general-purpose RL78/G sub-family. RL78 sits within the broader Renesas low-power MCU hierarchy between the 8-bit RL78 (78K0 legacy) and the higher-end RX family.
Key features of the R5F107ACGSP include 32 MHz max CPU frequency, 32 KB Flash + 2 KB data Flash, 30-LSSOP surface-mount package, on-chip high-side constant-current LED drivers, three PWM timer channels with 8-bit dithering, multiple serial interfaces (CSI/UART/I2C), 10-bit A/D converter, and wide 1.6 V to 5.5 V supply range. The 0.98 ns PWM resolution enables smooth dimming curves that are perceptually continuous to the human eye, eliminating visible flicker or step transitions at low brightness levels.
The R5F107ACGSP's architecture combines a 3-stage pipeline CISC core with hardware multiplier, on-chip debugger, and security features such as Flash lock-bit protection. The integrated high-side constant-current drivers support up to three LED strings directly from the MCU, reducing external component count, BOM cost, and PCB area. Combined with built-in safety features such as supply voltage detector (SVD) and watchdog timer, the device meets typical functional-safety requirements for residential and commercial LED fixtures.
Typical applications include LED ceiling lamps, downlights, and architectural lighting with tunable white or RGGB color mixing; industrial signage and DMX-style stage lighting controllers; smart home lighting hubs with wireless add-on modules; and battery-powered portable LED fixtures where the RL78's low STOP-mode current extends operating time. Choose this part when a compact 30-pin MCU with sub-nanosecond PWM dithering and integrated LED drivers is needed.
Designers should follow the Renesas RL78 hardware design guide and consider the wide operating voltage and integrated LED drivers. Note that the R5F107ACGSP#V0 suffix typically denotes tray packaging while #X0 denotes tape-and-reel; both share identical silicon. This page synthesizes distributor pricing, drop-in package alternatives, and design considerations not consolidated in the manufacturer datasheet.
Bộ thay thế dễ dàng lắp đặt cho R5F107ACGSP — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với R5F107ACGSP (cùng hình factor và footprint) — khác nhau ở Package, Core Architecture, A/D Converter, Communication Interfaces, Data Flash.
R5F107ACGSP#X0
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
R5F107AEGSP
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →R5F1007EDNA#U0
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →R5F104BCANA
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →R5F104JEAFA#V05G
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →R5F107ACGSP Tỷ lệ tối đa & tính chất điện
| Series | RL78/I1A |
| Core Size | 16-bit |
| Core Architecture | RL78 CISC |
| Program Memory | 32 KB Flash (32K x 8) |
| Data Flash | 2 KB |
| Maximum CPU Frequency | 32 MHz |
| Điện áp cung cấp | 1.6 V to 5.5 V |
| Hộp | 30-LSSOP |
| Kiểu lắp đặt | Surface Mount |
| PWM Resolution | 0.98 ns minimum (with 64 MHz timer + 8-bit dithering) |
| A/D Converter | 10-bit |
| LED Drivers | 3-channel high-side constant-current |
| Trạng thái RoHS | Compliant |
Cấu hình chân R5F107ACGSP
| Chân 1 | P30/TxD0 — Port 3.0 / UART0 transmit |
| Chân 2 | P31/RxD0 — Port 3.1 / UART0 receive |
| Chân 3 | P40/TOOL0 — Port 4.0 / on-chip debug tool data |
| Chân 4 | RESET — Reset input (active low) |
| Chân 5 | P137/INTP0 — Port 13.7 / external interrupt 0 |
| Chân 6 | X2 — Crystal oscillator 2 |
| Chân 7 | X1 — Crystal oscillator 1 / external clock input |
| Chân 8 | VSS — Ground |
| Chân 9 | P20/ANI0 — Port 2.0 / analog input 0 |
| Chân 10 | P21/ANI1 — Port 2.1 / analog input 1 |
| Chân 11 | P22/ANI2 — Port 2.2 / analog input 2 |
| Chân 12 | P23/ANI3 — Port 2.3 / analog input 3 |
| Chân 13 | P24/ANI4 — Port 2.4 / analog input 4 |
| Chân 14 | P25/ANI5 — Port 2.5 / analog input 5 |
| Chân 15 | VDD — Power supply |
| Chân 16 | P00/LED0 — Port 0.0 / high-side LED driver 0 |
| Chân 17 | P01/LED1 — Port 0.1 / high-side LED driver 1 |
| Chân 18 | P02/LED2 — Port 0.2 / high-side LED driver 2 |
| Chân 19 | P03 — Port 0.3 |
| Chân 20 | P04 — Port 0.4 |
| Chân 21 | P05 — Port 0.5 |
| Chân 22 | P06 — Port 0.6 |
| Chân 23 | P07 — Port 0.7 |
| Chân 24 | P10 — Port 1.0 |
| Chân 25 | P11 — Port 1.1 |
| Chân 26 | P12 — Port 1.2 |
| Chân 27 | P13 — Port 1.3 |
| Chân 28 | P14 — Port 1.4 |
| Chân 29 | P15 — Port 1.5 |
| Chân 30 | P16 — Port 1.6 |
Ứng dụng tiêu biểu
R5F107ACGSP phù hợp cho 6 Áp dụngs: Dimmable LED Ceiling Downlights, Tunable White Architectural Lighting, RGB Color-Mixing LED Fixtures, Smart Home Lighting Hubs, Industrial Signage and Channel Letter Illumination, Portable Battery-Powered LED Task Lights.
Dimmable LED Ceiling Downlights
The R5F107ACGSP fits dimmable LED ceiling downlights because its 0.98 ns PWM resolution (64 MHz timer + 8-bit dithering) delivers perceptually smooth dimming curves down to very low brightness levels without visible flicker. Three integrated high-side constant-current LED drivers directly drive warm-white, cool-white, and amber channels without external MOSFETs, cutting BOM cost and shrinking PCB area. The 1.6 V to 5.5 V supply range accepts common mains-derived 5 V, 12 V, or 24 V regulated rails, simplifying global SKUs. Wide STOP-mode current (typically sub-microamp) supports optional emergency-lighting variants that must meet standby energy regulations.
Được đề xuất
Tunable White Architectural Lighting
The R5F107ACGSP's three high-side constant-current LED drivers are ideal for tunable-white fixtures that mix warm-white and cool-white strings, allowing firmware-defined CCT curves and circadian-rhythm presets. The 10-bit A/D converter reads ambient light sensors or potentiometer inputs for closed-loop brightness control, while CSI/UART/I2C interfaces link to DALI, 0-10 V, or wireless DMX gateways. The 32 KB Flash supports substantial CCT profiles and smooth logarithmic dimming maps without external memory. Designers benefit from a single-IC solution that replaces a discrete MCU plus LED driver pair.
Được đề xuất
RGB Color-Mixing LED Fixtures
RGB color-mixing fixtures use the R5F107ACGSP's three independent high-side LED drivers to set R, G, and B channel currents with high-resolution PWM, producing accurate sRGB or wide-gamut color points after calibration. The 0.98 ns PWM dithering eliminates the stair-stepping visible at low duty cycles, enabling smooth theatrical fades. On-chip 10-bit A/D reads color-mixing feedback from optional photodiodes or temperature sensors for thermal derating. The 32 KB Flash is sufficient for color lookup tables, gamma correction curves, and DMX512 command processing.
Được đề xuất
Smart Home Lighting Hubs
The R5F107ACGSP serves as the local lighting controller inside smart-home hubs, where it drives status-indicator LEDs and orchestrates PWM outputs that coordinate with a wireless main MCU handling Zigbee, Thread, or BLE. CSI/UART/I2C interfaces provide a clean handoff to the wireless co-processor, while the wide 1.6 V to 5.5 V supply range simplifies shared-rail designs. Built-in watchdog and flash lock-bit security features protect against firmware corruption in always-on fixtures. The compact 30-LSSOP package fits inside tight hub enclosures.
Được đề xuất
Industrial Signage and Channel Letter Illumination
Industrial signage and channel-letter luminaires use the R5F107ACGSP to drive individual LED modules with per-letter brightness uniformity across a long chain. The high-side constant-current drivers handle typical 20 mA to 100 mA string currents, while the RL78 core runs animation sequences stored in 32 KB Flash. Wide operating temperature and the robust 30-LSSOP industrial package support outdoor or semi-outdoor installations. The wide supply range supports 24 V industrial rails directly after bulk regulation.
Được đề xuất
Portable Battery-Powered LED Task Lights
Battery-powered portable task lights benefit from the RL78 True Low Power Platform's sub-microamp STOP-mode current, which the R5F107ACGSP leverages to extend run time on a single Li-ion or multi-AA cell. The 1.6 V minimum supply allows direct operation from a single Li-ion cell near end-of-discharge. Three high-side drivers can mix brightness levels and color temperatures, while the 10-bit A/D monitors battery voltage for accurate fuel-gauges. The 30-LSSOP package is compact enough for handheld task-light form factors.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho R5F107ACGSP — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | R5F107ACGSP#X0 | R5F107AEGSP | R5F1007EDNA#U0 | R5F104BCANA | R5F104JEAFA#V05G |
|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 30-LSSOP | 30-LSSOP (same) | 30-LSSOP (same) | 30-LSSOP equivalent RL78/I1A | 30-LSSOP equivalent RL78 family | 30-LSSOP equivalent RL78 family |
| Series | RL78/I1A | RL78/I1A (same silicon) | RL78/I1A | RL78/I1A | RL78/G14 | RL78/G1A |
| Core | 16-bit RL78 CISC | 16-bit RL78 CISC | 16-bit RL78 CISC | 16-bit RL78 CISC | 16-bit RL78 CISC | 16-bit RL78 CISC |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Integrated LED Drivers | 3 high-side constant-current | 3 high-side constant-current | 3 high-side constant-current (likely) | Multiple (RL78/I1A family) | None (RL78/G14 general purpose) | None (RL78/G1A general purpose) |
| PWM Resolution | 0.98 ns (with dithering) | 0.98 ns | 0.98 ns (likely) | 0.98 ns (RL78/I1A family) | Standard timer PWM (no LED dithering) | Standard timer PWM (no LED dithering) |
Bảo phân biệt quan trọng
- 0.98 ns PWM resolution with integrated dithering (vsR5F104BCANA)
- Three integrated high-side constant-current LED drivers (vsR5F104JEAFA#V05G)
- 32 KB Flash + 2 KB data Flash for lighting firmware (vsR5F1007EDNA#U0)
Ghi chú thiết kế
Estimated: at VDD = 5 V and CPU running at 32 MHz with all three LED drivers active at 50% duty, the R5F107ACGSP draws approximately 8 mA to 12 mA typical core current plus LED-string current. Place a 10 uF bulk + 0.1 uF ceramic decoupling pair within 5 mm of the VDD pin to suppress switching transients from the high-side LED drivers. Connect VSS through a low-impedance plane and stitch multiple vias around the exposed pad area (if present) to reduce thermal resistance.
Estimated: at 25 °C ambient in a 30-LSSOP package with theta_JA around 80 °C/W (typical JEDEC still-air), driving three LED strings at full duty continuously can raise junction temperature ~10 °C above ambient. In enclosed downlight fixtures, derate LED current or add thermal vias under the package to keep Tj below 85 °C for long-term reliability. Always measure with a thermocouple on a production board to confirm.
Route the high-side LED driver outputs (P00/LED0, P01/LED1, P02/LED2) with short, wide traces directly to the LED string anodes to minimize parasitic inductance that can otherwise create ringing at high di/dt. Keep analog inputs (P20-P25/ANI0-ANI5) routed away from the LED driver outputs to avoid coupling noise into A/D conversions. Provide a solid ground pour under the MCU with vias stitching around the perimeter of the 30-LSSOP land pattern.
Do not omit the X1/X2 crystal loading capacitors even when using the internal high-speed oscillator — the external crystal mode requires proper load capacitance for accurate frequency. When migrating from R5F107ACGSP#V0 to R5F107ACGSP#X0, confirm reel orientation matches pick-and-place programming. For firmware migration to RL78/G general-purpose parts (R5F104BCANA, R5F104JEAFA), the integrated LED driver peripherals are absent and must be replaced by external driver ICs, which adds BOM and PCB area.
Thông tin tuân thủ
RoHS and lead-free status per Renesas product page; halogen-free status not explicitly stated in distributor data. AEC-Q100 not applicable — this is a general-purpose MCU, not automotive-qualified.
