R5F211B2SP#W4 - 16-Bit 20MHz R8C MCU | Renesas
MPN: R5F211B2SP#W4 ✓ Hoạt độngR5F211B2SP#W4 Tóm tắt
An R8C microcontroller is a general-purpose embedded processing device built around the Renesas R8C CPU core. Within the embedded hierarchy, it sits between simple 8-bit microcontrollers and more complex 32-bit application processors. The R5F211B2SP#W4 combines 16-bit processing, on-chip flash memory and integrated peripherals in one surface-mount package, making it suitable for compact control boards, industrial modules and cost-sensitive products.
Principal characteristics include a 16-bit RISC CPU core, 20 MHz maximum operating frequency, 8 KB flash memory and a 3 V to 5 V operating range. The manufacturer also identifies the minimum operating voltage as 2.7 V. Its 20-LSSOP package supports compact PCB layouts while keeping assembly compatible with standard automated surface-mount production methods. A tape-and-reel ordering code is associated with the listed part.
The R8C architecture supports efficient embedded control through a compact instruction set and integrated peripheral functions. Program storage in flash allows field-configurable applications without an external memory device, while the 16-bit datapath can improve arithmetic and control performance compared with an 8-bit MCU. The device does not include built-in USB support, so designs requiring USB require an external interface circuit.
Typical uses include industrial sequence controllers, sensor interfaces, compact instrumentation, appliance-control boards and communication modules. Its 20 MHz processing rate is suitable for multitasking or moderate control workloads where response time must remain predictable. The 8 KB flash capacity is most appropriate for firmware with focused application logic rather than extensive graphical interfaces or large protocol stacks.
When designing around this MCU, verify the complete pin assignment, peripheral multiplexing and clock configuration in the R8C/1A and R8C/1B group datasheet. Place all decoupling capacitors directly beside the corresponding supply pins and route reset, clock and programming signals away from noisy switching nodes. Confirm the 2.7 V minimum operating condition before using the device with a 3 V system.
This product record combines the manufacturer's technical identity, distributor product facts, package details, application guidance, design considerations and replacement analysis. It is intended to accelerate component selection while keeping the engineer focused on the confirmed 16-bit R8C architecture, 20 MHz clock, 8 KB flash memory and 20-LSSAP footprint.
Bộ thay thế dễ dàng lắp đặt cho R5F211B2SP#W4 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với R5F211B2SP#W4 (cùng hình factor và footprint) — khác nhau ở Package, Data Bus Width, Lead-Free Status, Program Memory Size, RAM Size.
R5F211B1SP#W4
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →R5F211B3SP#W4
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
R5F211B4SP#W4
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →R5F211B5SP#W4
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
R5F211B6SP#W4
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
R5F211B2SP#W4 Tỷ lệ tối đa & tính chất điện
| Microcontroller Type | 16-bit R8C microcontroller |
| CPU Core | R8C/1B |
| Tần số xung maksimum | 20 MHz |
| Flash Program Memory | 8 KB |
| Program Memory Organization | 8K x 8 bits |
| Operating Voltage Range | 3 V to 5 V |
| Minimum Operating Voltage | 2.7 V |
| Hộp | 20-LSSOP |
| Kiểu lắp đặt | Surface Mount |
| Packing Option | Tape and Reel |
| Lead-Free Status | Yes |
| Built-In USB Support | No |
| Bề rộng đường dữ liệu | 16 bit |
Hướng dẫn cấu hình chân R5F211B2SP#W4 20-lssop
Cấu hình chân cho R5F211B2SP#W4 (20-lssop gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho R5F211B2SP#W4.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
R5F211B2SP#W4 phù hợp cho 6 Áp dụngs: Industrial Sequence Controller, Compact Sensor Interface Module, Appliance Control Board, Communication Module, Portable Measurement Instrument, LED and Lighting Controller.
Industrial Sequence Controller
The R5F211B2SP#W4 fits compact sequence-control modules because its 16-bit R8C/1B core operates at up to 20 MHz and its 8 KB flash accommodates focused control firmware. The 20-LSSOP package reduces board footprint, while the 2.7 V minimum operating voltage supports lower-voltage industrial logic. Use the manufacturer's pin-assignment table to allocate digital inputs, actuator outputs and communications signals, and validate the final operating-temperature grade against the deployment environment.
Được đề xuất
Compact Sensor Interface Module
The R5F211B2SP#W4 is appropriate for small sensor-conditioning and acquisition modules requiring deterministic control without a complex processor. Its 20 MHz R8C core can service timed sampling, filtering and digital communications, while 8 KB of flash is suitable for calibrated control code and parameter tables. The 20-LSSOP footprint preserves board area, although external analog conditioning and interface transceivers remain necessary for many sensor types.
Được đề xuất
Appliance Control Board
Home and commercial appliance controllers can use the R5F211B2SP#W4 for motor sequencing, user-interface logic and safety-state management. A 16-bit CPU at 20 MHz provides more arithmetic headroom than an 8-bit controller, while on-chip flash eliminates an external program-memory device. The 20-LSSOP package supports compact assembly, but the 8 KB memory limit calls for disciplined code sizing and avoidance of resource-heavy graphical interfaces.
Được đề xuất
Communication Module
The R5F211B2SP#W4 can manage protocol framing, status monitoring and configuration in a compact communication module. Its 20 MHz R8C/1B core is suitable for interrupt-driven serial communication and background control tasks, and the 8 KB flash can hold a focused protocol stack. The device has no built-in USB, so USB communication requires an external controller; serial-interface modules can use the MCU directly once pin multiplexing is confirmed.
Được đề xuất
Portable Measurement Instrument
For a compact battery-powered measurement instrument, the R5F211B2SP#W4 provides a 16-bit processing core, 20 MHz clock and 8 KB flash in a compact package. It can coordinate conversions, range control, calibration storage and display updates when paired with external analog and display circuits. Its low-voltage operation begins at 2.7 V, but power-budget calculations must include the MCU, external analog circuitry and any communication interface.
Được đề xuất
LED and Lighting Controller
The R5F211B2SP#W4 can supervise LED drivers, sequencing logic and fault monitoring in a compact lighting controller. The 20 MHz R8C core supports timed updates and multiple control tasks, while the 20-LSSOP package leaves board area for power conversion and LED interface components. The device does not directly replace a constant-current LED driver, so the MCU should coordinate commands while dedicated circuitry handles regulated LED current.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho R5F211B2SP#W4 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | R5F211B1SP#W4 | R5F211B3SP#W4 | R5F211B4SP#W4 | R5F211B5SP#W4 | R5F211B6SP#W4 |
|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 20-LSSOP | 20-LSSOP - same | 20-LSSOP - same | 20-LSSOP - same | 20-LSSOP - same | 20-LSSOP - same |
| CPU Architecture | 16-bit R8C/1B | 16-bit R8C/1B | 16-bit R8C/1B | 16-bit R8C/1B | 16-bit R8C/1B | 16-bit R8C/1B |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Packing Option | Tape and Reel | Tape and Reel | Tape and Reel | Tape and Reel | Tape and Reel | Tape and Reel |
Bảo phân biệt quan trọng
- Compact 20-LSSOP implementation of a 16-bit R8C/1B controller (vsR5F211B1SP#W4)
- Defined 8 KB flash target configuration (vsR5F211B3SP#W4)
- Low-voltage operation in a 16-bit embedded-control package (vsR5F211B4SP#W4)
Ghi chú thiết kế
Assign every connection from the PLSP0020JB-A pin-assignment figure in the Renesas R8C/1A and R8C/1B group datasheet. Although the device uses a 20-LSSOP package, LSSOP lead spacing differs from standard SOIC, so use the manufacturer land pattern rather than adapting a generic 20-pin SOIC footprint. Confirm programming, reset and mode-entry pins against the final board schematic before fabrication.
Connect the required bypass capacitors close to the supply and ground pins using the values and grounding arrangement specified in the group datasheet. The listed minimum operating voltage is 2.7 V, while the nominal listing identifies a 3 V to 5 V range. Account for startup, regulator tolerance and peripheral load before selecting the system supply level so the MCU never operates below its specified limits.
Keep oscillator, reset and programming traces short and route them away from switching-converter and relay-control nodes. Use a continuous ground reference under the device where the board design permits, and place bulk decoupling near its source rather than relying solely on distributed capacitor positions. Validate signal levels and peripheral multiplexing from Figure 1.4 before assigning alternate functions to a pin.
Do not select the MCU solely by its 20 MHz headline frequency. Firmware must fit within the 8 KB flash capacity, and code that relies on a specific peripheral set or memory map may not transfer directly between R5F211 variants. Check the complete device option, interrupt vector layout, package pinout and electrical limits before treating another family member as a drop-in production substitute.
Thông tin tuân thủ
The distributor listing identifies the R5F211B2SP#W4 as lead-free. RoHS, REACH, halogen-free, conflict-minerals and automotive-qualification status are not established by the referenced technical records.