SI2435-F-FT 33.6kbps V.34 Fax Modem | Skyworks
MPN: SI2435-F-FT ✓ Hoạt độngSI2435-F-FT Tóm tắt
An ISOmodem is an integrated modem system that provides a compact interface between digital equipment and an analog telephone line. Its direct access arrangement, or DAA, handles the physical line connection, while the companion Si2417 provides the supporting system-side functions. The Si2435 is specifically designed for high-performance Group 3 fax communication systems and can operate across the 14,400 to 33,600 bit/s speed range identified for the chipset.
The SI2435-F-FT combines several communications functions in one package. Key features include a built-in phase-locked loop, DTMF detection, globally programmable telephone-line interfacing, and V.34 modem operation rated at 33,600 bit/s. Its 24-pin TSSOP package supports conventional surface-mount PCB assembly and is suitable for embedded fax, multifunction-printer, and office-equipment designs.
The Si2435 architecture integrates a third-generation direct access arrangement with the modem signal-processing functions. This integration reduces the number of external telephone-interface components required by the host system. The phase-locked loop supports stable synchronization within the modem design, while DTMF detection provides call-control information commonly used by telephone and fax equipment.
Typical uses include 33.6 kbit/s Group 3 fax machines, multifunction printers, fax servers, thermal-transfer fax products, and embedded communications modules. The two-chip Si2435 and Si2417 architecture is intended for designs that need telephone-line connectivity while preserving a compact implementation and avoiding a large collection of discrete analog-interface components.
When designing around the SI2435-F-FT, use the manufacturer’s reference circuit, exposed-pad or thermal-layout guidance where applicable, and the complete Si2435/Si2417 datasheet to establish the DAA network and digital interface. Check the host processor voltage levels, line-side protection requirements, and country-specific telephone-network interface implementation before releasing a production layout.
This product page combines manufacturer application guidance with package, interface, and sourcing information to help engineers identify the correct Si2435 configuration. It also documents the chipset relationship, explains the design roles of the Si2435 and Si2417, and highlights practical considerations for dependable embedded fax-modem integration.
Bộ thay thế dễ dàng lắp đặt cho SI2435-F-FT — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
SI2435-C-FT
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
SI2435-F-FT Thông số kỹ thuật
| Product Type | V.34 fax modem IC |
| Maximum Modem Data Rate | 33,600 bit/s |
| ISOmodem Chipset Speed Range | 14,400 bit/s to 33,600 bit/s |
| Telephone-Line Interface | Globally programmable direct access arrangement |
| Phase-Locked Loop | Built-in phase-locked loop |
| DTMF Support | Built-in DTMF detection |
| Hộp | 24-pin TSSOP |
| Số chân | 24 pins |
| Kiểu lắp đặt | Surface mount |
| System Architecture | System-side ISOmodem |
| Chipset Configuration | Two-chip Si2435 and Si2417 design |
| Modem Protocol | V.34 |
| Fax Classification | Group 3 fax modem |
| Direct Access Arrangement Generation | Third-generation DAA |
Hướng dẫn cấu hình chân SI2435-F-FT 24-pin tssop
Cấu hình chân cho SI2435-F-FT (24-pin tssop gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho SI2435-F-FT.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
SI2435-F-FT phù hợp cho 6 Áp dụngs: Group 3 Fax Machines, Multifunction Printers, Fax Servers, Thermal-Transfer Fax Products, Embedded Telephone Gateways, Industrial Fax Communication Modules.
Group 3 Fax Machines
The SI2435-F-FT fits a 33.6 kbit/s Group 3 fax machine because it combines a V.34 modem with an integrated globally programmable direct access arrangement. Placing it in the Si2435 and Si2417 chipset allows the equipment to connect to an analog telephone line while handling modulation, synchronization, and DTMF functions. The 24-pin TSSOP package supports compact controller-board layouts. Designers should reproduce the manufacturer DAA network and validate line protection for each target country.
Được đề xuất
Multifunction Printers
A multifunction printer can use the SI2435-F-FT to add a 33,600 bit/s fax modem without building the telephone-line interface from discrete analog blocks. The integrated DAA, built-in phase-locked loop, and DTMF detection support the fax and call-control functions required by many office appliances. The Si2417 companion device completes the two-chip chipset. Layout should follow the manufacturer reference circuit and preserve thermal and signal-integrity spacing around the 24-pin TSSOP.
Được đề xuất
Fax Servers
The SI2435-F-FT is suitable for embedded fax-server and network-fax appliances requiring a direct analog telephone-line interface. Its 33,600 bit/s V.34 modem capability and integrated third-generation DAA reduce external line-interface complexity, while DTMF detection supports signaling functions commonly exposed by fax servers. The Si2435 and Si2417 chipset is designed for compact implementations. Host firmware, line-coupling components, and country-specific protections still require complete circuit validation.
Được đề xuất
Thermal-Transfer Fax Products
Compact thermal-transfer fax products benefit from the SI2435-F-FT because the chipset provides 14,400 to 33,600 bit/s operation with an integrated programmable DAA in a 24-pin TSSOP package. This supports reliable fax transmission without an expansive discrete modem circuit. DTMF detection can assist with telephone control, and the phase-locked loop supports synchronization. Engineers should account for line-interface components, surge protection, and the thermal environment around the printer mechanism.
Được đề xuất
Embedded Telephone Gateways
The SI2435-F-FT can serve as the fax modem element of an embedded telephone gateway that bridges legacy Group 3 fax traffic with modern control or data-processing electronics. Its V.34 operation at 33,600 bit/s and integrated DAA provide the required analog-line modem functions, while DTMF detection supports call-control signaling. The 24-pin TSSOP package simplifies board integration, although gateway designers must validate echo, line-state, protection, and regulatory requirements.
Được đề xuất
Industrial Fax Communication Modules
Industrial equipment requiring remote document transmission can use the SI2435-F-FT as a compact V.34 fax interface. The chipset’s integrated DAA, phase-locked loop, and DTMF detection provide core telephone-line functions, while the 24-pin TSSOP package supports embedded assembly. The design remains sensitive to industrial noise, temperature, surge events, and telephone-network variation, so protective networks and grounding should be based on the manufacturer reference design and field requirements.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho SI2435-F-FT — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | SI2435-C-FT |
|---|---|---|
| Package | 24-TSSOP | 24-TSSOP |
| Brand | Skyworks Solutions Inc. | Skyworks Solutions Inc. |
| Product Type | V.34 fax modem IC | V.34 fax modem IC |
| Maximum Data Rate | 33,600 bit/s | 33,600 bit/s |
| Chipset Speed Range | 14,400 bit/s to 33,600 bit/s | 14,400 bit/s to 33,600 bit/s |
| Telephone-Line Interface | Globally programmable third-generation DAA | Globally programmable third-generation DAA |
| Phase-Locked Loop | Built-in | Built-in |
| DTMF Detection | Built-in | Built-in |
| Chipset Partner | Si2417 | Si2417 |
| Ordering-Code Suffix | F-FT | C-FT |
Bảo phân biệt quan trọng
- High V.34 fax throughput (vsSI2435-C-FT)
- Integrated telephone-line interface (vsSI2435-C-FT)
- Integrated signaling and synchronization (vsSI2435-C-FT)
Ghi chú thiết kế
Reproduce the DAA network and component placement from the manufacturer Si2435/Si2417 reference circuit, including the line-coupling and protection components. Keep the telephone-line side physically separated from digital clocks and interfaces, use the recommended grounding arrangement, and minimize loop area around sensitive analog nodes. The integrated DAA simplifies the design but does not eliminate careful high-voltage line-network layout.
Decouple each supply rail with the capacitance and placement specified in the manufacturer datasheet, placing the closest bypass capacitor directly between the appropriate power and ground pins. Verify host-interface logic levels and regulator headroom before connecting the Si2435 and Si2417 chipset. The operating voltage and absolute maximum limits are not stated in the product listing, so they must be taken directly from the manufacturer datasheet.
Route digital clock and data traces away from the DAA and telephone-line network, and follow the manufacturer’s recommended termination and grounding strategy. The built-in phase-locked loop supports modem synchronization, but board-generated jitter or return-path noise can still affect communication reliability. Validate the completed board for clock quality, DTMF detection, V.34 negotiation, and error recovery across representative line conditions.
Do not treat the SI2435 and Si2417 as independent single-chip modem solutions; the Si2435 is one half of a specified two-chip ISOmodem chipset. Confirm which functions each device provides before assigning PCB nets. Also verify the full ordering code, temperature grade, and package suffix before substituting SI2435-C-FT, because suffix differences can carry configuration or qualification requirements.
Thông tin tuân thủ
No RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ordering code. AEC-Q100 is not applicable because the SI2435 is a fax-modem interface IC rather than an automotive-qualified device.