SI3203-B-GM - 2-Channel 3.3V Telecom SLIC | Skyworks Solutions
MPN: SI3203-B-GM ✗ Cuối đờiSI3203-B-GM Tóm tắt
A SLIC is a telecom interface integrated circuit that connects a subscriber line to a digital voice-processing system. Within the product hierarchy, a SLIC is an interface IC, followed by telecom interface ICs and, more broadly, semiconductor devices. The SI3203-B-GM handles the line-facing side of a voice path while providing a compact interface between external line circuitry, voice codecs, and the system controller.
The principal device ratings include two channels, a 3.3 V supply, 45 mA supply current, 60 dB channel-related performance, and operation from -40°C to 85°C. Its 100 V linefeed capability provides separation from the low-voltage digital and analog portions of the design. Integration reduces the number of discrete line-interface functions needed around a subscriber-line card while maintaining a compact 40-VFQFN footprint.
The SI3203-B-GM belongs to the ProSLIC family of telecom interface devices. Its integrated linefeed interface, codec-related functionality, and low-voltage digital supply are intended for dual-channel line-card designs. The exposed pad provides a direct thermal path from the die to the PCB, while the low 3.3 V operating supply helps simplify power partitioning between the line interface and surrounding logic.
Typical applications include two-channel voice-over-IP terminals, analog telephone adapters, subscriber-line access equipment, digital loop carriers, voice gateways, and central-office line-card modules. The device is particularly relevant where a compact two-channel interface, a 3.3 V system rail, and 100 V linefeed support are required within the same telecom design.
PCB design should prioritize short line-side routing, controlled return paths, adequate exposed-pad thermal vias, and careful separation between sensitive analog signals and switching circuitry. Confirm the reference design, external component values, linefeed protection arrangement, and pin-level power requirements in the manufacturer datasheet before releasing production artwork.
This page combines the verified device identity, package characteristics, application guidance, design cautions, and same-footprint comparison information in one engineering-focused reference. It is intended to support component selection and hardware planning without replacing the manufacturer’s full electrical, timing, and reference-design documentation.
Bộ thay thế dễ dàng lắp đặt cho SI3203-B-GM — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với SI3203-B-GM (cùng hình factor và footprint) — khác nhau ở Package, Product Series.
SI3203-B-FM
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →SI3203-B-FMR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
SI3203-B-GM Thông số kỹ thuật
| Device Type | Subscriber Line Interface Concept (SLIC) and codec interface IC |
| Channel Count | 2 channels |
| Điện áp cung cấp | 3.3 V |
| Điện áp cung cấp | 45 mA |
| Linefeed Voltage | 100 V |
| Signal Performance | 60 dB |
| Hộp | 40-VFQFN, 6 x 6 mm |
| Package Type | QFN with exposed pad |
| Số chân | 40 pins |
| Kiểu lắp đặt | Surface mount |
| Nhiệt độ hoạt động | -40°C to 85°C |
| Shipping Format | Tray |
| Product Series | ProSLIC |
| Application Category | Telecom interface IC |
| Line Interface Type | Two-channel subscriber line interface |
| Exposed Thermal Pad | Present |
Hướng dẫn cấu hình chân SI3203-B-GM qfn with exposed pad
Cấu hình chân cho SI3203-B-GM (qfn with exposed pad gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho SI3203-B-GM.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
SI3203-B-GM phù hợp cho 6 Áp dụngs: Two-Channel Voice-over-IP Terminal, Digital Loop Carrier Line Card, Analog Telephone Adapter, Voice Gateway Channel Module, Central Office Line Interface, Industrial Telephone Interface.
Two-Channel Voice-over-IP Terminal
The SI3203-B-GM fits a two-channel voice-over-IP terminal that needs one compact subscriber-line interface rather than separate line-driver and codec functions. Its two-channel configuration directly matches a dual-line endpoint, while the 3.3 V supply integrates with common low-voltage terminal logic and the 100 V rating supports the line-side interface. Place the device according to the manufacturer reference layout, provide the specified bypass and linefeed networks, and maintain controlled separation between line-side and logic-side return paths.
Được đề xuất
Digital Loop Carrier Line Card
A digital loop carrier line card can use the SI3203-B-GM when each subscriber channel requires a compact SLIC and codec interface. Two channels per device improve board density, and the 3.3 V rail matches the card’s digital logic environment. The 100 V linefeed rating supports the required line-side voltage range, but protection, ringing, bypass capacitance, and thermal-pad layout remain critical. Validate the complete line network against the reference design before production.
Được đề xuất
Analog Telephone Adapter
The SI3203-B-GM is appropriate for an analog telephone adapter that converts one or two subscriber lines into a digital voice endpoint. Its integrated two-channel SLIC/codec function reduces the number of separate line-interface packages, while the 3.3 V supply suits low-voltage embedded hardware. The adapter must still include suitable line protection and the manufacturer-specified analog network. Use the exposed pad as a thermal connection to minimize junction-temperature rise in compact enclosures.
Được đề xuất
Voice Gateway Channel Module
In a voice gateway channel module, the SI3203-B-GM provides a compact two-channel interface between subscriber lines and the system’s digital voice-processing circuitry. Its 40-VFQFN package preserves routing density, and the 100 V linefeed capability covers the line-facing voltage environment. The 45 mA supply rating helps define the 3.3 V rail budget, while the exposed pad provides a thermal path. Clocking, firmware control, line supervision, and digital isolation must be verified in the reference design.
Được đề xuất
Central Office Line Interface
A central-office line interface can use the SI3203-B-GM where two subscriber channels must be accommodated in a limited board area. The combined SLIC and codec function supports a compact line-card implementation, and the 3.3 V operation allows partitioning from the higher-voltage line side. Designers should follow the manufacturer’s linefeed, protection, grounding, and exposed-pad instructions. The reported operating range of -40°C to 85°C is suitable for many indoor telecommunications environments.
Được đề xuất
Industrial Telephone Interface
The SI3203-B-GM can support an industrial telephone interface requiring two subscriber lines and a low-voltage digital control section. Its two-channel architecture limits the number of line-interface ICs, while the -40°C lower operating temperature supports equipment used in varied ambient conditions. The 100 V linefeed rating must be paired with suitable isolation and surge protection. Keep high-energy line routing away from sensitive control signals and use a full exposed-pad via pattern for thermal performance.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho SI3203-B-GM — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | SI3203-B-FM | SI3203-B-FMR |
|---|---|---|---|
| Manufacturer | Skyworks Solutions | Skyworks Solutions | Skyworks Solutions |
| Package | 40-VFQFN, 6 x 6 mm | 40-VFQFN, 6 x 6 mm | 40-VFQFN, 6 x 6 mm |
| Channel Count | 2 channels | 2 channels | 2 channels |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V |
| Supply Current | 45 mA | 45 mA | 45 mA |
| Linefeed Voltage | 100 V | 100 V | 100 V |
| Signal Performance | 60 dB | 60 dB | 60 dB |
| Minimum Operating Temperature | -40°C | 0°C | -40°C |
| Exposed Pad | Present | Present | Present |
| Order Suffix | GM | FM | FMR |
Bảo phân biệt quan trọng
- Two-channel integration in a 40-VFQFN package (vsSI3203-B-FM)
- Exact same-core electrical identity with order flexibility (vsSI3203-B-FMR)
- Compact 6 x 6 mm subscriber-line integration (vsSI3203-B-GQ)
Ghi chú thiết kế
Implement the SI3203-B-GM in the 40-VFQFN 6 x 6 mm land pattern specified by the manufacturer, including electrical and thermal vias beneath the exposed pad. Keep the line-side components and their return-current paths grouped on one side of the device, and place bypass capacitors close to their associated supply pins. Confirm pin 1 orientation and exposed-pad connections against the package drawing before releasing artwork.
Design the 3.3 V rail to support the listed 45 mA device supply current while leaving margin for digital control, clocking, and external interface loads. Place local high-frequency bypass capacitance at the supply pins and use a separate, stable return strategy for line-side currents. The 100 V linefeed rating identifies the internal line-side capability, but it does not replace external surge, overvoltage, and fault protection.
Treat the exposed pad as the primary thermal path rather than as an optional ground connection. Use the manufacturer’s recommended via pattern and connect the pad to the specified ground plane, then provide uninterrupted copper where board area permits. Estimated thermal performance depends on pad copper, via count, board construction, ambient temperature, and heat flow from adjacent components, so validate the final assembly with thermal measurement rather than relying on package size alone.
Do not substitute the 48-pin TQFP SI3203-B-GQ directly for the 40-VFQFN SI3203-B-GM; the package and pin count differ. Also verify temperature-range requirements when considering SI3203-B-FM, and confirm whether the order code requires tray or reel packaging. Drop-in approval should cover the footprint, pin functions, electrical limits, clock requirements, firmware control, and exposed-pad connection.
Thông tin tuân thủ
The device is a telecom interface IC rather than an automotive-qualified product. No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified in the manufacturer product information.