SR-MT9101SAC-HP-SWITCH-B - 16A Matter over Thread Smart Relay | Sunricher
MPN: SR-MT9101SAC-HP-SWITCH-B ✓ Hoạt độngSR-MT9101SAC-HP-SWITCH-B Tóm tắt
An in-wall smart relay (also called a smart switch module or in-line relay) is a wireless-controlled switching device installed inside a wall outlet or junction box to provide remote on/off control of a connected load. Smart relays sit at the appliance/lighting tier of the home-automation hierarchy (load -> smart relay -> wireless protocol -> border router -> cloud/ecosystem -> user app/voice assistant). Unlike Wi-Fi smart plugs, Thread-based relays use a low-power IEEE 802.15.4 mesh that requires a Thread Border Router (for example, Apple HomePod mini, Google Nest Hub, or Amazon Echo with Thread support) to communicate with the home Wi-Fi and the user's preferred Matter ecosystem.
Key features include 16 A relay contact rating, 100-240 VAC universal mains input, Matter-over-Thread primary radio, plus a ZigBee 3.0 fallback radio for dual-protocol operation. The module requires a neutral wire (N) for powering its radio and control circuitry, and pairs by scanning a Matter QR code printed on the device. Once commissioned, the relay can be exposed to Apple Home, Amazon Alexa, Google Home, and SmartThings simultaneously through standard Matter multi-admin capability, and can additionally be controlled by ZigBee coordinators thanks to the dual radio.
The device integrates a 16 A latching or non-latching mechanical relay with zero-cross switching for reduced inrush stress, an AC-DC converter for internal power, and a multi-protocol SoC running both a Matter (Thread) stack and a ZigBee 3.0 stack on the same module. The on-board firmware supports OTA updates via Thread and ZigBee, allowing manufacturers and integrators to push compatibility fixes. A small status LED reports pairing state and current load condition during commissioning.
Typical applications include retrofitting smart on/off control into existing wall switch boxes for ceiling lights, fans, and AC outlets, and building energy-management systems where a compact 16 A relay with both Matter and ZigBee support is required. Because the module is rated for high inrush loads (up to 3680 W incandescent / 1220 W LED), it is well suited to both resistive lighting and motor loads.
When designing with this device, ensure the wall box has sufficient depth for the module body, provide a reliable neutral connection, and verify that the installation site has adequate Thread mesh coverage or a nearby ZigBee coordinator for commissioning. This product page synthesises distributor pricing, drop-in alternatives, and practical design notes from manufacturer documentation and integrator references.
Bộ thay thế dễ dàng lắp đặt cho SR-MT9101SAC-HP-SWITCH-B — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với SR-MT9101SAC-HP-SWITCH-B (cùng hình factor và footprint) — khác nhau ở Case Material, Output Voltage, Product Type, Product Weight.
SR-MT9101SAC-HP-SWITCH
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
SR-MT9101SAC-HP-SWITCH-B-2
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
SR-MT9101AC-HP-SWITCH-B
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
SR-ZG9101SAC-HP-Switch
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
SR-MT9041A-R
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →SR-MT9101SAC-HP-SWITCH-B Tỷ lệ tối đa & tính chất điện
| Product Type | Smart In-Wall Relay Module |
| Thương hiệu | Sunricher |
| Series | MT Switch-B (Matter over Thread) |
| Input Voltage | 100-240 VAC |
| Điện áp đầu ra | 100-240 VAC (pass-through) |
| Điện áp đầu ra (tối đa) | 16 A |
| Max Resistive Load (Incandescent) | 3680 W |
| Max LED Load | 1220 W |
| Channel Count | 1 (single-channel) |
| Wireless Protocol (Primary) | Matter over Thread (IEEE 802.15.4) |
| Wireless Protocol (Secondary) | ZigBee 3.0 |
| Thread Border Router Required | Yes (e.g., Apple HomePod mini) |
| Matter Ecosystem Support | Apple Home, Google Home, Amazon Alexa, SmartThings |
| Pairing Method | Matter QR code scan |
| Neutral Wire Required | Yes |
| Case Material | Plastic (ABS flame-retardant) |
| Product Weight | 0.1 kg (approx) |
| Place of Origin | Guangdong, China |
| Mounting | In-wall (inside standard wall box) |
Hướng dẫn cấu hình chân SR-MT9101SAC-HP-SWITCH-B plastic (abs flame-retardant)
Cấu hình chân cho SR-MT9101SAC-HP-SWITCH-B (plastic (abs flame-retardant) gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho SR-MT9101SAC-HP-SWITCH-B.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
SR-MT9101SAC-HP-SWITCH-B phù hợp cho 6 Áp dụngs: In-Wall Retrofit Smart Lighting, Smart Appliance and Outlet Control, Voice-Controlled Smart Home Ecosystem Integration, Hotel and MDU (Multi-Dwelling Unit) Room Control, Home Assistant / Open-Source Smart Home Bridge, Energy Monitoring and Demand-Response Retrofit.
In-Wall Retrofit Smart Lighting
The SR-MT9101SAC-HP-SWITCH-B is designed for retrofit installation behind an existing mechanical wall switch to add smart on/off control of ceiling or wall lighting without disturbing the visible switch plate. With a 100-240 VAC universal input and a 16 A / 3680 W incandescent (1220 W LED) switched output, it handles the most common residential lighting loads across both 120 V (US) and 230 V (EU/AU) mains. Unlike a Wi-Fi smart bulb, this in-line relay keeps lighting functional with the original wall switch and works in concert with Matter/Thread ecosystems, making it ideal for retrofit projects where re-wiring is undesirable.
Được đề xuất
Smart Appliance and Outlet Control
Smart outlets and under-sink appliance circuits benefit from the SR-MT9101SAC-HP-SWITCH-B's 16 A high-current capacity and dual-protocol radios. The module can switch loads such as coffee makers, beverage coolers, exhaust fans, and heated towel rails on schedules or via Matter scenes. The 1220 W LED rating provides ample headroom for LED-driver-inrush surges typical of modern appliance SMPS power supplies, while the integrated ZigBee 3.0 radio ensures compatibility with legacy ZigBee hub installations during a phased migration to Matter.
Được đề xuất
Voice-Controlled Smart Home Ecosystem Integration
When commissioned into a Matter ecosystem (Apple Home, Google Home, Amazon Alexa, SmartThings), the SR-MT9101SAC-HP-SWITCH-B becomes controllable via Siri, Google Assistant, and Alexa voice commands. The dual-radio design (Matter-over-Thread primary, ZigBee 3.0 secondary) means a single hardware SKU bridges legacy ZigBee and modern Matter installations without ripping-and-replacing coordinators, ideal for a mixed-vintage smart home where the existing ZigBee backbone must be retained alongside new Thread devices.
Được đề xuất
Hotel and MDU (Multi-Dwelling Unit) Room Control
In hospitality and apartment installations, the SR-MT9101SAC-HP-SWITCH-B drives high-inrush loads such as corridor lighting, bathroom heat lamps, and AC outlet control on a per-room basis, while remaining centrally manageable via a property-wide Matter or ZigBee network. The compact in-wall form factor adapts to standard EU/US/AU wall boxes, and the 16 A relay tolerates the inductive inrush of larger lighting transformers used in hotel corridors. Property managers can roll out over-the-air firmware updates over Thread or ZigBee without physical access.
Được đề xuất
Home Assistant / Open-Source Smart Home Bridge
Open-source enthusiasts can commission the SR-MT9101SAC-HP-SWITCH-B into Home Assistant via either Matter integration (paired through an OTBR dongle such as Home Assistant SkyConnect) or the native ZigBee Home Automation (ZHA / Zigbee2MQTT) integration. Per the Home Assistant community thread on Thread smart relays (2026-01-17), the device joins a Thread network alongside other OpenThread Border Routers and can be exposed as a switch entity to Home Assistant with full on/off telemetry and firmware-OTA channels.
Được đề xuất
Energy Monitoring and Demand-Response Retrofit
Although the SR-MT9101SAC-HP-SWITCH-B is primarily a switching relay, its Matter Smart Home device-type exposes instantaneous on/off state and accumulated runtime to compatible Matter energy-management apps. Building on its 16 A contact rating, the device can be deployed at circuit level to schedule or shed non-essential loads during peak demand periods in residential demand-response programs. Pairing with a Matter energy-management app gives the homeowner a coarse load-by-load breakdown without installing dedicated energy-metering CTs.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho SR-MT9101SAC-HP-SWITCH-B — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | SR-MT9101SAC-HP-SWITCH | SR-MT9101SAC-HP-SWITCH-B-2 | SR-MT9101AC-HP-SWITCH-B | SR-ZG9101SAC-HP-Switch | SR-MT9041A-R |
|---|---|---|---|---|---|---|
| Brand | Sunricher | Sunricher | Sunricher | Sunricher (Lightronic) | Sunricher | Sunricher |
| Package / Form Factor | In-wall smart relay module (Sunricher MT Switch-B) | In-wall smart relay module (same housing) | In-wall smart relay module (same housing) | In-wall smart relay module (Lightronic, same housing) | In-wall AC switch (Sunricher ZG series) | In-wall smart relay module (MT series) |
| Input Voltage | 100-240 VAC | 100-240 VAC | 100-240 VAC | 100-240 VAC | 100-240 VAC | 100-240 VAC |
| Output Current (max) | 16 A | 16 A | 16 A | 16 A | ~1.7 A (400 W @ 230 V) | 10 A per channel (2 channels) |
| Max Resistive Load | 3680 W | 3680 W | 3680 W | 3680 W | 400 W | 2300 W per channel |
| Wireless Protocol | Matter over Thread + ZigBee 3.0 (dual radio) | Matter over Thread only | Matter over Thread + ZigBee 3.0 (dual radio) | Matter only | ZigBee only (no Matter) | Matter over Thread only |
| Channel Count | 1 | 1 | 1 | 1 | 1 | 2 |
| Neutral Wire Required | Yes | Yes | Yes | Yes | Yes | Yes |
| Matter Ecosystem Support | Apple Home, Google Home, Alexa, SmartThings | Apple Home, Google Home, Alexa, SmartThings | Apple Home, Google Home, Alexa, SmartThings | Apple Home, Google Home, Alexa, SmartThings | ZigBee coordinators only (not Matter) | Apple Home, Google Home, Alexa, SmartThings |
Bảo phân biệt quan trọng
- Dual-radio Matter-over-Thread + ZigBee 3.0 in a single in-wall module (vsSR-MT9101SAC-HP-SWITCH)
- Higher switched power rating (3680 W vs 400 W) (vsSR-ZG9101SAC-HP-Switch)
- 2-channel option available in same MT series form factor (vsSR-MT9041A-R)
Ghi chú thiết kế
The SR-MT9101SAC-HP-SWITCH-B requires a neutral wire to power its radio and microcontroller; do NOT install it in switch boxes that lack a neutral conductor, as the relay electronics will fail to boot. For 'no-neutral' retrofit scenarios (older US switch loops), use Sunricher's specific no-neutral SKUs or specify a different vendor. Estimated by integrator reference - confirm with the installation manual before wiring.
Although rated 16 A continuous, de-rate by 20% for sustained loads inside an enclosed wall box where ambient can exceed 40 C (e.g., near roof cavities or grouped with other relays). At full 16 A on a 230 V circuit (3680 W) the relay contact heating is significant; ensure adequate ventilation around the module. Estimated: 16 A continuous at 230 V produces approximately 5-8 W of contact dissipation; de-rated to 13 A for closed-junction-box installs per common practice.
When commissioning the SR-MT9101SAC-HP-SWITCH-B, position the wall box within reliable Thread mesh range of at least one other mains-powered Thread device (router). If commissioning fails intermittently, add a Sunricher SR-2421-MT1 Thread-DALI bridge or any other mains-powered Sunricher Thread relay to bolster the mesh. The Matter commissioning QR code is printed on the module housing - photograph it before snapping the module into the wall box.
LED-driver inrush can exceed 100 A peak on cold-start; the SR-MT9101SAC-HP-SWITCH-B is rated for 1220 W LED (about 5.3 A continuous on 230 V) but its relay contact can handle the brief inrush surges. Do NOT exceed the 16 A absolute rating with capacitive loads (large LED arrays on a single driver), as the AC capacitor inrush will pit the contacts over time. For larger LED installs, use the dual-channel SR-MT9041A-R to split the load across two relay contacts.
Thông tin tuân thủ
RoHS and lead-free status inferred from consumer-electronics place-of-origin (Guangdong, China) and Sunricher Matter-series product page context. Specific REACH, halogen-free, and conflict-minerals declarations should be requested from Sunricher directly. AEC-Q100 is not applicable (relay module, not automotive-grade semiconductor).
