STM32F030F4P6TR - 48MHz Cortex-M0 16KB MCU | STMicroelectronics (Tape & Reel)
MPN: STM32F030F4P6TR ✓ Hoạt động| Số lượng | Giá đơn vị | Phụ |
|---|---|---|
| 1 | $0.6469 | $0,65 |
| 10 | $0.4672 | $4,67 |
| 100 | $0.4133 | $41,33 |
| 500 | $0.3953 | $197,65 |
| 1.000 | $0.3773 | $377,30 |
STM32F030F4P6TR Tóm tắt
A microcontroller is a semiconductor device that integrates a processor core, memory, and peripherals into one embedded-control platform. In the hierarchy, the STM32F030F4P6TR is an Arm Cortex-M0 microcontroller, an embedded processor, and a member of the STM32F0 family. The STM32F0 series combines a compact general-purpose architecture with timers, communication interfaces, and analog conversion functions for small control systems.
The verified data identifies a high-performance 32-bit RISC core operating at 48 MHz, 16 KB Flash organized as 16K x 8, and 4 KB SRAM according to the distributor and datasheet search results. The device also includes 12-bit and 15-bit ADC capability as stated in the LCSC result, while the manufacturer page identifies enhanced peripherals and I/O resources. Power-on reset and power-down reset functionality is identified in the DigiChip result.
The STM32F030F4P6TR is appropriate for compact embedded systems where cost, simplicity, and low pin count matter more than high-speed connectivity or large memory capacity. Its Arm Cortex-M0 instruction set supports deterministic embedded control, while the 48 MHz clock provides a practical balance between processing capability and power efficiency. The 20-pin TSSOP package enables compact PCB layouts while supporting external peripherals and signal inputs.
Typical uses include low-cost sensor nodes, simple industrial controllers, compact motor-control stages, digital meters, and connected IoT devices. Designers must ensure that the selected firmware, clock tree, peripherals, and board-level support devices match the STM32F030x4 device requirements. The exact pin function, electrical limits, peripheral configuration, and package dimensions should be confirmed against the STMicroelectronics datasheet.
For a new design, the 48 MHz Cortex-M0 core and 16 KB Flash make the STM32F030F4P6TR most suitable for small control loops and auxiliary processing rather than complex graphical or high-bandwidth workloads. The TSSOP-20 package also requires careful PCB escape routing and adequate pin-copper clearance during assembly.
This page combines verified manufacturer and distributor information, source links, package details, engineering use cases, and replacement considerations to support component selection and sourcing. Because the supplied data does not include a complete verified pin table or all peripheral electrical limits, those fields are intentionally not guessed.
Bộ thay thế dễ dàng lắp đặt cho STM32F030F4P6TR — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với STM32F030F4P6TR (cùng hình factor và footprint) — khác nhau ở Package, Maximum CPU Frequency, Flash Memory, Product Type, Mounting Type.
Công cụ so sánh nhanh — Chọn các bộ phận thay thế để so sánh song song:
HK32F030F4P6
📋 Tham chiếu thay thế (không có trong danh mục)
STM32F030F4P6TR Tỷ lệ tối đa & tính chất điện
| Core | Arm Cortex-M0 32-bit RISC |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 16 KB (16K x 8) |
| SRAM | 4 KB |
| Operating Voltage Range | 2.4 V to 3.6 V |
| Architecture | Arm-based 32-bit RISC |
| ADC Resolution | 12-bit and 15-bit |
| Hộp | 20-pin TSSOP |
| Kiểu lắp đặt | Surface Mount |
| Product Family | STM32F0 value-line series |
| Embedded Control Role | Industrial control, IoT, metering, and motor-control applications |
| Power-On Reset | POR |
| Power-Down Reset | PDR |
| Peripheral Resources | Timers, ADC, communication interfaces, and enhanced I/O |
| Memory Organization | 16K x 8 Flash organization |
| Core Architecture | Arm Cortex-M0 |
| Datasheet Family Coverage | STM32F030x4, STM32F030x6, STM32F030x8, and STM32F030xC |
Hướng dẫn cấu hình chân STM32F030F4P6TR 20-pin tssop
Cấu hình chân cho STM32F030F4P6TR (20-pin tssop gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho STM32F030F4P6TR.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
STM32F030F4P6TR phù hợp cho 6 Áp dụngs: Compact Industrial Control, Low-Cost IoT Sensor Node, Digital Metering, Simple Motor-Control Interface, Compact Control Board, Embedded Automation Module.
Compact Industrial Control
The STM32F030F4P6TR fits compact industrial-control tasks because its Arm Cortex-M0 core operates at up to 48 MHz and the device provides 16 KB Flash, 4 KB SRAM, timers, and ADC capability. It can execute sequencing, monitor analog inputs, and coordinate relays or actuators from a 2.4 V to 3.6 V supply. The 20-pin TSSOP footprint helps keep controller boards compact, while the integrated RISC core reduces the need for external processing. The primary design trade-off is limited memory and peripheral bandwidth, so complex logging or high-speed closed-loop control should be validated against the datasheet.
Được đề xuất
Low-Cost IoT Sensor Node
The STM32F030F4P6TR is suitable for a small IoT sensor node that samples an analog signal, applies basic conditioning, and formats data for a serial communications peripheral. Its 48 MHz Cortex-M0 core provides enough control performance for local filtering and state-machine tasks, while 4 KB SRAM supports short working buffers and 16 KB Flash accommodates compact firmware. Operation from 2.4 V to 3.6 V aligns with many low-voltage embedded rails. Designers should confirm the exact ADC channels, communication peripherals, and low-power modes in the manufacturer documentation before selecting the part for battery operation.
Được đề xuất
Digital Metering
The STM32F030F4P6TR can serve as the control MCU in a digital meter that acquires sensor inputs, performs scaling and calibration, drives a display, and manages keypad or serial output. Its verified 12-bit and 15-bit ADC capability provides a basis for measurement-oriented designs, while the 48 MHz core handles acquisition sequencing and control logic. The 2.4 V to 3.6 V range is useful for compact measurement equipment. Accuracy depends on the analog front end, reference design, layout, and calibration strategy; those parameters are not fully specified in the supplied data and must be checked against the datasheet.
Được đề xuất
Simple Motor-Control Interface
The STM32F030F4P6TR is appropriate for small motor-control interfaces that use timers and GPIO outputs to generate control signals, read feedback, and supervise system state. The 48 MHz Arm Cortex-M0 core provides deterministic embedded execution, while the ADC capability can support current, position, or analog feedback monitoring. The 20-pin TSSOP package is useful when the controller must fit close to a driver circuit. This application requires careful validation of timer mapping, pin alternate functions, electrical limits, and firmware timing because the supplied search results do not provide the complete timer and pin assignment tables.
Được đề xuất
Compact Control Board
The STM32F030F4P6TR supports compact control boards that combine sensor inputs, simple actuator outputs, and a low-cost Arm-based firmware platform. Its 16 KB Flash and 4 KB SRAM are sufficient for small control applications, and the 2.4 V to 3.6 V operating range simplifies integration with conventional embedded power rails. The TSSOP-20 package offers a small surface-mount solution but requires careful escape routing and assembly planning. Because the supplied data does not state exact GPIO counts, package dimensions, or thermal parameters, those details must be confirmed from official STMicroelectronics documentation.
Được đề xuất
Embedded Automation Module
The STM32F030F4P6TR can act as the local controller in an embedded automation module that coordinates digital inputs, outputs, timing functions, and simple analog measurements. The Cortex-M0 architecture provides a straightforward 32-bit platform for state machines and deterministic control loops, while timers and communication interfaces support common automation tasks. Its compact TSSOP-20 package is advantageous when the module must fit into a small enclosure. Firmware portability and peripheral equivalence should be verified for any migration, especially because similar MCU families may use different peripheral registers, interrupt mappings, or clock configurations.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho STM32F030F4P6TR — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | HK32F030F4P6 |
|---|---|---|
| Package | 20-pin TSSOP | 20-pin TSSOP |
| Brand | STMicroelectronics | GigaDevice |
| Firmware Compatibility | STMicroelectronics STM32F0 firmware ecosystem | Hardware and software compatibility claimed |
Bảo phân biệt quan trọng
- Verified STMicroelectronics family positioning (vsHK32F030F4P6)
- Defined target memory configuration (vsHK32F030F4P6)
- Defined target clock and supply (vsHK32F030F4P6)
- Package-level commonality (vsHK32F030F4P6)
Ghi chú thiết kế
Place the STM32F030F4P6TR power and decoupling connections directly between the appropriate supply and ground pins, following the exact package and pinout in the STMicroelectronics datasheet. Keep the 20-pin TSSOP escape routes short and provide adequate ground-plane continuity around the device. Because the supplied snippets do not provide a complete pin table, do not infer alternate functions or pad locations from package count alone.
Do not treat a same-package MCU as a guaranteed drop-in replacement. The verified HK32F030F4P6 result specifically describes a pin-compatible engineering-review candidate that may require firmware work. Before replacing STM32F030F4P6TR, compare power pins, reset behavior, oscillator connections, ADC channels, timer mappings, interrupt vectors, bootloader support, and peripheral register compatibility using the manufacturer documentation.
Design the 2.4 V to 3.6 V supply with sufficient stability margin and verify the current requirements of the selected external peripherals. Use local decoupling close to the MCU supply pins and keep analog and digital return currents separated where practical. The supplied data does not provide regulator current limits or package thermal resistance, so supply sizing and thermal validation must use the official electrical characteristics.
For ADC-based metering or sensor nodes, route analog inputs away from fast switching nodes and clocks, use a continuous ground reference, and follow the datasheet recommendations for analog grounding. The reported 12-bit and 15-bit ADC capability does not determine measurement accuracy by itself; accuracy also depends on source impedance, sampling time, reference stability, calibration, layout, and noise filtering.
Thông tin tuân thủ
The supplied verified data does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for STM32F030F4P6TR.
