STM32F373C8T6TR - 72MHz Cortex-M4 64KB MCU | STMicroelectronics (Tape & Reel)
MPN: STM32F373C8T6TR ✓ Hoạt độngSTM32F373C8T6TR Tóm tắt
What is a Cortex-M4 microcontroller? A Cortex-M4 MCU is a reduced-instruction-set microcontroller core designed for efficient real-time embedded processing. STMicroelectronics places this core inside the broader STM32F3 microcontroller family, combining embedded Flash and SRAM with timers, serial interfaces, analog peripherals, and communication peripherals. The STM32F373C8T6TR is therefore a microcontroller rather than a discrete processor or analog component.
The verified product listing identifies a 72 MHz maximum operating frequency and 64 KB Flash organized as 64K x 8. The device also carries an FPU designation in distributor and comparison results, supporting efficient floating-point and digital signal-processing workloads. Its 48-LQFP package provides a conventional leaded surface-mount footprint that can be inspected and assembled with standard SMT production processes. The part is identified as a 32-bit MCU with ARM Cortex-M4 processing.
Typical embedded uses include sensor acquisition and signal conditioning, motor and motion control, industrial monitoring, communication modules, and compact control systems. The 72 MHz core provides useful computational headroom for protocol handling and real-time control, while 64 KB Flash constrains firmware size and should be checked against application requirements. The STM32F373C8T6TR is appropriate when engineers need a Cortex-M4-class controller in a 48-LQFP package.
When selecting or replacing this MCU, verify package pin compatibility, Flash capacity, SRAM, peripheral mapping, clock requirements, and firmware support rather than relying on the STM32F3 name alone. The available verified data does not provide a complete pinout, pricing table, or all electrical timing parameters, so those items must be obtained from the official STMicroelectronics documentation before design release.
Bộ thay thế dễ dàng lắp đặt cho STM32F373C8T6TR — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
STM32F372C8T6
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
STM32F373C8T6TR Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Maximum Operating Frequency | 72 MHz |
| Flash Memory | 64 KB (64K x 8) |
| Core Architecture | ARM Cortex-M4 |
| Floating Point Unit | FPU |
| Hộp | 48-LQFP (7x7 mm) |
| Kiểu lắp đặt | Surface Mount |
| Instruction Width | 32-bit |
| Series | STM32F3 |
| Device Family | STM32F373xx |
| Microcontroller Category | Microcontroller IC |
| Application Domain | Embedded control and real-time signal processing |
Hướng dẫn cấu hình chân STM32F373C8T6TR 48-lqfp (7x7 mm)
Cấu hình chân cho STM32F373C8T6TR (48-lqfp (7x7 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho STM32F373C8T6TR.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
STM32F373C8T6TR phù hợp cho 6 Áp dụngs: Industrial Sensor Acquisition, Motor and Motion Control, Communication Equipment, Digital Signal Processing, Consumer Accessory Controller, Instrumentation and Measurement.
Industrial Sensor Acquisition
The STM32F373C8T6TR fits compact sensor-acquisition and monitoring designs because its Cortex-M4 core operates up to 72 MHz and includes 64 KB of Flash for acquisition logic and control firmware. The available verified data does not specify ADC resolution, channel count, sampling rate, SRAM, or analog supply limits, so those requirements must be checked in the official STMicroelectronics documentation before selecting analog front-end components.
Được đề xuất
Motor and Motion Control
A 72 MHz ARM Cortex-M4 MCU provides a useful real-time control base for small motor, position, or actuator systems. The STM32F373C8T6TR's verified FPU designation can help with floating-point control calculations, while 64 KB Flash constrains the application to appropriately sized firmware. Timer channels, PWM outputs, encoder interfaces, current sensing, and pin assignments are not available in the verified snippets and must be confirmed before design.
Được đề xuất
Communication Equipment
STM32F373C8T6TR is suitable for small protocol-handling and embedded communication modules where a 32-bit Cortex-M4 processor is useful for framing, buffering, and control. The supplied product data confirms 72 MHz operation, 64 KB Flash, and a 48-LQFP package, but it does not confirm UART, SPI, I2C, USB, or CAN details. Interface selection therefore requires the official datasheet and firmware-driver support review.
Được đề xuất
Digital Signal Processing
The Cortex-M4 architecture and FPU designation make STM32F373C8T6TR a reasonable candidate for compact embedded DSP functions such as filtering, control transforms, and signal analysis. Its 72 MHz clock provides processing headroom, but the verified 64 KB Flash capacity must be weighed against algorithm tables, buffers, and application firmware. SRAM availability is not supplied, so algorithm and buffer sizing must remain provisional until the official memory specification is confirmed.
Được đề xuất
Consumer Accessory Controller
The STM32F373C8T6TR can serve as the central controller in a compact consumer accessory when the design needs a 32-bit Cortex-M4 core, moderate Flash, and a conventional 48-LQFP footprint. It is important to verify low-power modes, available SRAM, I/O voltage, peripheral coverage, and package pin assignments because those details are not present in the verified search snippets. Consumer designs should also validate ESD, environmental, and lifecycle requirements independently.
Được đề xuất
Instrumentation and Measurement
For instrumentation, the STM32F373C8T6TR's 72 MHz Cortex-M4 processing can support control logic, measurement sequencing, and digital filtering around external analog front ends. The 48-LQFP 7x7 mm package is mechanically practical for many compact instruments, but the verified data does not identify converter specifications, comparator resources, timing peripherals, or analog supply range. Those parameters determine whether the device is suitable for precision measurement and must be checked before layout release.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho STM32F373C8T6TR — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | STM32F372C8T6 |
|---|---|---|
| Package | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm), verified by comparison result |
| Brand | STMicroelectronics | STMicroelectronics |
| Core | ARM Cortex-M4 | ARM Cortex-M4 |
| Maximum Frequency | 72 MHz | 72 MHz |
| Flash Memory | 64 KB (64K x 8) | 64 KB, per comparison result |
| FPU | FPU designation listed | FPU designation listed |
| Instruction Width | 32-bit | 32-bit |
| Drop-in Status | Target device | Conditional candidate; complete pin and peripheral verification required |
Bảo phân biệt quan trọng
- 72 MHz Cortex-M4 processing with FPU designation (vsSTM32F372C8T6)
- 64 KB Flash memory (vsSTM32F372C8T6)
- 48-LQFP 7x7 mm package (vsSTM32F372C8T6)
Ghi chú thiết kế
The verified data does not provide the STM32F373C8T6TR operating-voltage range or current consumption. Before schematic capture, check the official datasheet for supply limits, internal regulator behavior, power-on reset requirements, decoupling recommendations, and I/O voltage domains. Do not infer analog or digital voltage compatibility from the 72 MHz clock specification.
The part is specified as a 48-LQFP 7x7 mm package. Confirm the official land pattern, pin-1 orientation, pad dimensions, soldering profile, and exposed thermal or ground requirements before releasing the PCB footprint. A mechanically similar package is not sufficient evidence of pin compatibility; use the STMicroelectronics package drawing as the controlling mechanical document.
The verified 64 KB Flash figure should be treated as a hard design input. Include bootloader space, vector table growth, calibration data, diagnostics, and update logic in the memory budget. Because SRAM and peripheral specifications are absent from the supplied snippets, firmware allocation and real-time task sizing should remain provisional until the official STM32F373 documentation is reviewed.
Thông tin tuân thủ
The supplied verified data does not include explicit compliance statements for STM32F373C8T6TR. Compliance must be confirmed from the current STMicroelectronics product documentation or supplier declarations.
