STM32F413VGH6 - 32-Bit 100MHz Cortex-M4 MCU | STMicroelectronics
MPN: STM32F413VGH6 ✓ Hoạt độngSTM32F413VGH6 Tóm tắt
A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, and peripherals such as timers, communication interfaces, and analog inputs on one package. The STM32F413 belongs to the STM32F4 family of Arm Cortex-M4 devices, providing a compact platform for industrial controls, communications equipment, audio and digital signal processing, and connected embedded products.
The STM32F413VGH6 operates at a maximum frequency of 100 MHz and includes 1 MB of Flash organized as 1M x 8 bits. Its 32-bit Arm Cortex-M4 core supports compact real-time control while the higher operating frequency provides additional processing margin for communications, control loops, and DSP-oriented firmware. The device is identified with a 3.3 V supply rating by its distributor listing.
The STM32F413xG/H device family is documented in the STMicroelectronics manufacturer datasheet. That datasheet is the controlling reference for peripheral availability, electrical limits, pin multiplexing, clock-tree configuration, electrical characteristics, package dimensions, and programming considerations. Cortex-M4 programming and instruction-set guidance is referenced separately through PM0214 in the manufacturer documentation.
Typical uses include industrial automation modules, connected sensor equipment, audio interfaces, motor and motion-control systems, and compact embedded controllers. The combination of 100 MHz processing, 1 MB Flash, and a 7 x 7 mm UFBGA package supports designs that require substantial firmware and peripheral integration without allocating substantial board area.
When laying out a new board, use the manufacturer pinout, package drawing, and land pattern to assign every ball and confirm that exposed-pad and thermal requirements are met. Place decoupling capacitors close to the supply pins, route clocks away from sensitive analog inputs, and follow the recommended programming and debug interface connections before committing the PCB layout.
This product page combines the exact manufacturer and distributor identifiers with practical design guidance, package-focused comparison criteria, and an explicit review of drop-in replacement constraints. It helps engineers distinguish genuine pin-compatible substitutions from parts that merely use similar microcontroller specifications.
Bộ thay thế dễ dàng lắp đặt cho STM32F413VGH6 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với STM32F413VGH6 (cùng hình factor và footprint) — khác nhau ở Flash Memory, Package, RoHS Status.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếSTM32F413VGH6 Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit ARM Cortex-M4 Microcontroller |
| Processor Core | Arm Cortex-M4 |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 100 MHz |
| Flash Memory | 1 MB (1M x 8 bits) |
| Nominal Supply Voltage | 3.3 V |
| Hộp | 100-UFBGA (7 x 7 mm) |
| Kiểu lắp đặt | Surface Mount |
| Product Family | STM32F413xG/H |
| Series | STM32F4 |
| Trạng thái RoHS | unknown |
| REACH Status | unknown |
Hướng dẫn cấu hình chân STM32F413VGH6 100-ufbga (7 x 7 mm)
Cấu hình chân cho STM32F413VGH6 (100-ufbga (7 x 7 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho STM32F413VGH6.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
STM32F413VGH6 phù hợp cho 6 Áp dụngs: Industrial Automation Controller, Connected Sensor Gateway, Audio and DSP Interface, Motor and Motion Control, Human-Machine Interface, Data Acquisition and Monitoring.
Industrial Automation Controller
The STM32F413VGH6 fits compact industrial automation controllers that combine deterministic real-time control with a generous on-chip Flash budget. Its Arm Cortex-M4 core operates at up to 100 MHz, while 1 MB of Flash supports application firmware, parameter tables, and local control logic. The 100-UFBGA (7 x 7 mm) package helps reduce board area in distributed controller assemblies. Before deployment, verify the selected temperature grade, industrial EMC requirements, isolation strategy, and every peripheral assigned to the control task.
Được đề xuất
Connected Sensor Gateway
The STM32F413VGH6 is suitable for connected sensor gateways that must aggregate measurements, run protocol processing, and store local configuration. Its 100 MHz Cortex-M4 core provides processing capacity for communications and filtering, and 1 MB of Flash accommodates networking and application firmware. The 7 x 7 mm UFBGA package supports dense boards, although careful decoupling, antenna keepouts, and clock routing remain essential. Confirm the exact serial-interface and USB requirements against the device documentation during design review.
Được đề xuất
Audio and DSP Interface
The STM32F413VGH6 can support compact audio interfaces and DSP-oriented control tasks where the 100 MHz Cortex-M4 core provides useful arithmetic throughput and the 1 MB of Flash holds substantial firmware. It is particularly attractive where an integrated MCU can coordinate sampling control, digital filtering, communications, and user-interface functions on one board. The 100-UFBGA package saves area but makes clean analog layout and ground partitioning critical. Verify the required ADC, timer, and serial-interface capabilities before assigning the signal chain.
Được đề xuất
Motor and Motion Control
The STM32F413VGH6 is well suited to compact motor-control and motion-control modules that need a fast real-time loop, extensive control firmware, and multiple communication functions. The Cortex-M4 core can execute up to 100 MHz, providing timing margin for commutation, current sampling, and supervisory control. Its small 7 x 7 mm UFBGA package supports space-constrained power modules. The design must still verify timer channels, encoder interfaces, analog inputs, and electrical limits for the selected motor-control architecture.
Được đề xuất
Human-Machine Interface
The STM32F413VGH6 can serve as the central controller in a compact human-machine interface by running graphics-independent menus, input handling, communications, and system supervision. Its 1 MB of Flash provides room for larger embedded applications, while the 100 MHz core supports responsive control without a separate high-performance processor. The small 100-UFBGA package is useful in space-constrained panels. Confirm whether the required display interface, touch controller, external memory, and connector density are available before finalizing the architecture.
Được đề xuất
Data Acquisition and Monitoring
The STM32F413VGH6 fits distributed data-acquisition and monitoring systems that combine sensor conditioning, digital conversion, local processing, and upstream communications. Its 32-bit Cortex-M4 core handles control logic and filtering at up to 100 MHz, and 1 MB of Flash supports calibration data, logging, and communications firmware. The 7 x 7 mm UFBGA package helps place processing close to analog circuitry. Validate the required ADC channels, analog reference arrangement, timers, and input-impedance requirements against the manufacturer datasheet.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho STM32F413VGH6 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Package | 100-UFBGA (7 x 7 mm) |
| Brand | STMicroelectronics |
| Processor Core | Arm Cortex-M4 |
| CPU Architecture | 32-bit RISC |
| Maximum CPU Frequency | 100 MHz |
| Flash Memory | 1 MB (1M x 8 bits) |
| Nominal Supply Voltage | 3.3 V |
| Device Family | STM32F413xG/H |
Bảo phân biệt quan trọng
- High-performance Cortex-M4 operation (vsSTM32F413VHT6)
- Large embedded Flash configuration (vsSTM32F413CG)
- Compact 7 x 7 mm area (vsSTM32F413VHT6)
Ghi chú thiết kế
Use the STMicroelectronics STM32F413xG/H package drawing and recommended PCB land pattern for the 100-UFBGA (7 x 7 mm) implementation. Confirm whether the exposed thermal pad is electrically tied, solderable, or required for heat removal according to the package variant. Place decoupling capacitors beside their associated supply balls and keep routing between the power network and sensitive inputs short.
Partition analog, digital, clock, and high-current return paths carefully. Route oscillator and clock signals away from ADC and communication inputs, maintain a continuous ground reference beneath the MCU area, and avoid switching-node copper beneath sensitive pins. Use the manufacturer's pin-alternate-function tables to avoid conflicts between oscillator, debug, communication, and timer functions.
Do not treat another STM32F4 microcontroller as interchangeable merely because it uses a Cortex-M4 core. Verify the exact package ball map, voltage range, pin multiplexing, flash and SRAM capacity, clock connections, and peripheral requirements. A footprint match alone does not establish electrical, firmware, or timing compatibility, and any substitute should pass a board-level engineering review.
Plan the supply network for the 3.3 V operating point while retaining adequate margin for the complete board. Follow the manufacturer minimum capacitance and ESR requirements for internal and external supply stabilization. Check startup and shutdown ordering for attached peripherals so no external circuit back-feeds an MCU rail during reset or power-off conditions.
Thông tin tuân thủ
Target-specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated in the manufacturer or distributor source content used for this page.
