STM32F423VHT6 - 100MHz Cortex-M4 MCU, 1.5MB Flash | STMicroelectronics
MPN: STM32F423VHT6 ✓ Hoạt độngSTM32F423VHT6 Tóm tắt
A microcontroller is a programmable semiconductor device that integrates a processor core, memory, and peripherals into one compact component. The STM32F4 series belongs to the broader embedded-processing and microcontroller hierarchy, combining real-time control with dedicated hardware for communications, analog conversion, timers, and external data storage.
The STM32F423VHT6 combines a 100 MHz Arm Cortex-M4 core with 1.5 MB of Flash and an ART Accelerator according to the product listing. Its high-performance access-line positioning makes it suitable for industrial control, embedded instrumentation, communications equipment, and applications requiring substantial code storage and real-time processing.
The device is identified as a 1.5 MByte Flash, 100 MHz, 32-bit RISC microcontroller. The listing also identifies DSP and FPU capabilities, which are valuable for filtering, control algorithms, and other mathematically intensive workloads. Detailed RAM capacity, peripheral inventory, voltage limits, and electrical characteristics should be confirmed in the manufacturer datasheet before a design is released.
Typical applications include industrial automation modules, motor and motion-control equipment, communications gateways, test and measurement systems, and consumer or embedded control platforms. The 100-pin LQFP package exposes substantially more I/O than smaller 32-pin or 48-pin devices, making the part suitable for systems that need multiple communications interfaces, timer channels, analog inputs, and digital signals.
When laying out a PCB, use the manufacturer's pinout and land-pattern guidance exactly. Pay particular attention to power, ground, decoupling, oscillator, reset, and boot-configuration pins. This page provides a verified product overview, structured alternatives, and purchasing guidance for engineers evaluating the STM32F423VHT6.
Bộ thay thế dễ dàng lắp đặt cho STM32F423VHT6 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếSTM32F423VHT6 Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Processor Core | Arm Cortex-M4 |
| Maximum CPU Frequency | 100 MHz |
| Architecture | 32-bit RISC |
| Flash Memory | 1.5 MB |
| Flash Organization | 1.5 M x 8 bits |
| DSP Support | Yes |
| Floating-Point Unit | Yes |
| ART Accelerator | Yes |
| Package Type | 100-pin LQFP |
| Package Dimensions | 14 x 14 mm |
| Kiểu lắp đặt | Surface mount |
| Điện áp cung cấp hoạt động | 1.8 V / 2.5 V / 3.3 V |
Hướng dẫn cấu hình chân STM32F423VHT6 14 x 14 mm
Cấu hình chân cho STM32F423VHT6 (14 x 14 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho STM32F423VHT6.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
STM32F423VHT6 phù hợp cho 6 Áp dụngs: Industrial Automation Controller, Motor and Motion Control, Digital Signal Processing, Communications Gateway, Test and Measurement Equipment, Embedded Data Acquisition.
Industrial Automation Controller
The STM32F423VHT6 fits industrial automation modules that combine real-time control with multiple external interfaces. Its Arm Cortex-M4 core operates at up to 100 MHz, while DSP and FPU support can accelerate filtering, transformations, and control calculations. The 100-pin LQFP package provides more I/O than compact controllers, allowing designers to connect sensors, actuators, communications transceivers, and status indicators. The 1.5 MB Flash capacity also supports a substantial embedded application, protocol stack, and configuration layer. For a production controller, verify the exact temperature grade, peripheral set, and isolation strategy in the manufacturer datasheet.
Được đề xuất
Motor and Motion Control
The STM32F423VHT6 is appropriate for motor-control and motion-control subsystems that need deterministic real-time execution alongside a substantial set of I/O. The 100 MHz Cortex-M4 core and FPU support are useful for current-loop calculations, transforms, filtering, and trajectory functions. Its 100-pin LQFP package can expose multiple timer channels, encoder interfaces, control outputs, and communications signals without moving to a smaller-pin-count device. The designer should confirm timer features, complementary outputs, analog channels, and package assignments for the selected motor topology before schematic release.
Được đề xuất
Digital Signal Processing
The STM32F423VHT6 is well suited to embedded digital signal processing because its Arm Cortex-M4 core combines a 100 MHz clock with DSP instructions and a floating-point unit. These resources support filtering, waveform analysis, control math, and sensor-data conditioning without requiring a separate DSP processor. The 1.5 MB Flash capacity can hold sizable firmware and lookup data, while the 100-pin package offers access to multiple peripherals and external interfaces. Confirm RAM requirements, available timer and DMA resources, and ADC performance against the exact datasheet before finalizing the signal chain.
Được đề xuất
Communications Gateway
The STM32F423VHT6 can serve as the host processor in a communications gateway because it combines a 100 MHz Cortex-M4 core, 1.5 MB of Flash, and a high pin count for multiple serial interfaces. Engineers can connect Ethernet, CAN, RS-485, or wireless modules while maintaining protocol processing and application logic on one device. Its DSP and FPU capabilities can also support filtering or modem-related workloads. The exact peripheral inventory, alternate-function routing, USB capability, and memory configuration must be checked against the device documentation because the selected ordering code determines the final resource mix.
Được đề xuất
Test and Measurement Equipment
The STM32F423VHT6 is a practical control processor for portable and bench test equipment requiring responsive user interaction, data acquisition, and external connectivity. The 100 MHz Cortex-M4 core handles control loops and data formatting, while the ART Accelerator improves code execution from Flash. The 100-pin package provides access to display, keypad, communication, trigger, and analog-sensing connections in a single controller. For precision instruments, pair the MCU with suitable converters and analog front ends, and validate trigger timing, ADC characteristics, reference accuracy, and low-noise layout according to the complete datasheet.
Được đề xuất
Embedded Data Acquisition
The STM32F423VHT6 supports embedded data-acquisition systems that must combine sensor conditioning, digital filtering, and local data handling. Its DSP and FPU features help process sampled data at 100 MHz core frequency, and the 1.5 MB Flash can store firmware, calibration tables, and control code. The 100-pin LQFP package simplifies access to ADC-related pins, timers, DMA requests, and communications. Engineers should verify the number and characteristics of ADC channels and the exact RAM allocation, then maintain short, separated analog and digital routing on the PCB to preserve measurement quality.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho STM32F423VHT6 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
Ghi chú thiết kế
Use the manufacturer's 100-pin LQFP land pattern and pin-description table without changing pad geometry to accommodate a similar STM32 device. Route all supply pins, ground pins, decoupling capacitors, reset circuitry, and clock components exactly as shown in the reference layout. Confirm every alternate-function assignment on the schematic because a different STM32 family can use the same physical package with incompatible pin functions.
Place the required bulk and high-frequency decoupling capacitors close to their associated VDD and VSS pins. Keep the switching loop formed by the regulator and local capacitors compact, and provide a low-impedance return path to the ground reference. Use the voltage and capacitor values specified in the STM32F423VHT6 hardware guidance rather than relying on generic values.
Do not assume that another STM32 in a larger LQFP package is a drop-in replacement merely because both use an Arm Cortex-M4 core. Validate pin names, alternate functions, power pins, oscillator connections, boot behavior, exposed peripheral resources, and firmware support. The STM32F429ZGT6 comparison candidate has a different package pin count, so it requires a PCB redesign.
Separate analog inputs, precision references, oscillator signals, and high-speed communication routes from digital return currents. Use a continuous ground plane where practical, avoid routing switching-node copper beneath sensitive components, and follow the manufacturer's recommendations for analog isolation. Validate timing and measurement accuracy with the final stack-up and external circuitry rather than relying only on schematic connectivity.
Thông tin tuân thủ
The verified product results do not provide a definitive extracted compliance statement for this exact ordering code. The device is a general-purpose microcontroller; automotive qualification is not established by the product data.