STM32F479IIT6 - 180MHz Cortex-M4 MCU, 2MB Flash | STMicroelectronics
MPN: STM32F479IIT6 ✓ Hoạt độngSTM32F479IIT6 Tóm tắt
A microcontroller is a complete programmable control platform containing a processor core, memory, communication interfaces, timers, analog converters, and other peripherals. The STM32F4 series belongs to the hierarchy of embedded-system controllers: microcontroller, 32-bit RISC processor, Arm Cortex-M4 core, and high-performance embedded microcontroller. This integration reduces the component count required for industrial control, audio processing, communications, data acquisition, and human-interface equipment.
The STM32F479IIT6's principal strengths include its 180 MHz Cortex-M4 core, 2 MB Flash memory, and 384 KB SRAM. The Cortex-M4 architecture supports efficient real-time workloads and includes DSP instructions and single-precision floating-point hardware. Its Flash capacity accommodates larger firmware, bootloaders, protocol stacks, graphics or control code, and application logic, while the SRAM supports buffering, network stacks, audio samples, and real-time data processing.
The 176-LQFP package exposes the device's high pin count for external connectivity. Its feature set includes communication peripherals and advanced analog functions such as analog-to-digital and digital-to-analog conversion. The STM32F479IIT6 is therefore suited to industrial controllers, motor-control equipment, audio interfaces, PLC modules, communications equipment, and data-acquisition systems where a high-performance MCU and substantial memory are needed in one component.
The exact pin assignments, electrical limits, peripheral configurations, clock tree, and package dimensions should be taken from the STMicroelectronics STM32F479xx datasheet and reference manual. Before schematic or PCB release, verify each power pin, decoupling requirement, boot configuration, debug connection, clock source, and analog reference against the applicable device variant.
This page combines the core device characteristics with replacement guidance, application-fit analysis, comparison parameters, and practical design considerations. It is intended to help engineers identify whether the STM32F479IIT6 provides the required processing, memory, package, and peripheral mix before committing to a design.
For development, STMicroelectronics provides the STM32Cube ecosystem and Arm Cortex-M debugging tools, but the exact debugger, programmer, and accessory choices should follow the board design and current tool support. Use the manufacturer pin-description table and reference manual when assigning PCB tracks, particularly for power, ground, analog inputs, and high-current communication interfaces.
Bộ thay thế dễ dàng lắp đặt cho STM32F479IIT6 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với STM32F479IIT6 (cùng hình factor và footprint) — khác nhau ở Product Type, DSP Support, Flash Organization, Floating-Point Unit, Operating Voltage Options.
STM32F469IIT6
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →STM32F469IGT6
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
STM32F469IIT6G
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
STM32F479IIT6 Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Manufacturer | STMicroelectronics |
| Processor Core | ARM Cortex-M4 |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 180 MHz |
| Flash Memory | 2 MB |
| Flash Organization | 2M x 8 |
| SRAM | 384 KB |
| DSP Support | Yes |
| Floating-Point Unit | Yes |
| Hộp | 176-LQFP (24 mm x 24 mm) |
| Số chân | 176 pins |
| Operating Voltage Options | 1.8 V, 2.5 V, and 3.3 V |
| Temperature Grade Code | I-grade |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân STM32F479IIT6 176-lqfp (24 mm x 24 mm)
Cấu hình chân cho STM32F479IIT6 (176-lqfp (24 mm x 24 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho STM32F479IIT6.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
STM32F479IIT6 phù hợp cho 6 Áp dụngs: Industrial Automation Controller, Embedded Audio Signal Processor, Data Acquisition and Control, Motor Control and Power Systems, Communications Gateway, Human-Machine Interface Controller.
Industrial Automation Controller
The STM32F479IIT6 fits industrial automation controllers that combine deterministic control loops with communication and data logging. Its Cortex-M4 core operates at up to 180 MHz, while DSP and floating-point instructions accelerate filtering and control calculations. The 2 MB Flash provides room for control algorithms, diagnostics, communications stacks, and update code, and 384 KB of SRAM supports task buffers and protocol state. Place local decoupling beside every supply pin and route high-current outputs separately from sensitive analog and clock nets.
Được đề xuất
Embedded Audio Signal Processor
The STM32F479IIT6 is appropriate for embedded audio signal processing because its Cortex-M4 core supports DSP instructions and floating-point hardware at up to 180 MHz. The 384 KB SRAM can hold sample buffers and intermediate filter data, while the 2 MB Flash can store codecs, effects, control tables, and a bootloader. Use the manufacturer-recommended audio interface path and verify clocking, sample-rate support, and DMA behavior in the reference manual. Keep analog audio routing away from switching nodes and provide clean, decoupled analog supplies.
Được đề xuất
Data Acquisition and Control
The STM32F479IIT6 supports data-acquisition systems requiring high-speed control alongside mixed-signal processing. The 180 MHz core can execute filtering, calibration, and protocol tasks, while 2 MB Flash accommodates acquisition firmware and calibration tables. Its 384 KB SRAM can buffer samples while DMA transfers them to external storage or a communications interface. Validate converter acquisition timing, trigger routing, reference-voltage requirements, and ADC performance in the electrical-characteristics documentation before finalizing the analog front end.
Được đề xuất
Motor Control and Power Systems
The STM32F479IIT6 is suitable for sophisticated motor-control systems that combine fast digital control with multiple communication and sensing functions. Its Cortex-M4 DSP and floating-point support at up to 180 MHz helps implement current loops, speed calculations, transforms, and fault handling. The 2 MB Flash allows larger algorithms and diagnostics, while the 176-LQFP exposes numerous signal-routing options. Use isolated gate drivers for power stages, protect control inputs from switching transients, and validate timing margins under the worst operating conditions.
Được đề xuất
Communications Gateway
The STM32F479IIT6 can serve as a communications gateway when a product must combine several protocol stacks with local control. Its 180 MHz Cortex-M4 core provides processing capacity for framing, routing, encryption-related workload, and status monitoring. The 2 MB Flash and 384 KB SRAM are useful for protocol software and packet buffering, while the 176-LQFP provides access to numerous communications pins. Confirm the required USART, SPI, I2C, USB, and Ethernet capabilities against the exact device configuration before selecting it for a gateway design.
Được đề xuất
Human-Machine Interface Controller
The STM32F479IIT6 fits human-machine interface controllers that combine display or touch handling, general control, and connectivity. The 180 MHz Cortex-M4 core has capacity for graphical state management, input handling, and real-time peripheral updates, while 2 MB Flash can hold interface assets and application firmware. Its SRAM supports display buffers and touch-controller data. Validate display-interface timing, external memory requirements, and the available GPIO allocation in the pin table, and separate display and touch signals from high-current or noisy power-conversion nodes.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho STM32F479IIT6 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | STM32F469IIT6 | STM32F469IGT6 | STM32F469IIT6G |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 176-LQFP (24 mm x 24 mm) | 176-LQFP - same package | 176-LQFP - same package | 176-LQFP - same package |
| Flash Memory | 2 MB | 2 MB | 1 MB | 2 MB |
| Architecture | 32-bit RISC | 32-bit MCU | 32-bit MCU | 32-bit MCU |
| Special Features | High-performance STM32F4 series | STM32F4 series | STM32F4 series | STM32F4 series |
Bảo phân biệt quan trọng
- Higher confirmed Flash capacity than the identified 1 MB alternative (vsSTM32F469IGT6)
- Confirmed high-performance Cortex-M4 positioning (vsSTM32F469IIT6)
- Substantial SRAM for real-time buffering (vsSTM32F469IIT6)
Ghi chú thiết kế
Use the manufacturer power-supply connection diagram as the authority for every voltage rail and decoupling value. Place the required bulk and high-frequency capacitors directly at the associated LQFP power pins, with short ground returns, and avoid sharing narrow return paths between analog, digital, and high-current loads. Check simultaneous switching activity, peripheral load current, and temperature rise under worst-case operating conditions before releasing the power tree.
Assign all 176 package positions from the manufacturer pin-description table rather than inferring unused connections. Keep oscillators on short routes away from high-current outputs, place decoupling capacitors on the component side of the board, and provide continuous ground-plane return paths. Review exposed-pad or thermal-pad requirements, if applicable to the selected package variant, and preserve the manufacturer's recommended via arrangement for thermal performance.
The 180 MHz core and high-pin-count package make disciplined routing important. Use the shortest practical paths for high-speed clocks and memory interfaces, maintain a continuous reference plane beneath routed signals, and avoid crossings between unrelated clock, communications, and analog nets. Validate edge rates, impedance, crosstalk, and external peripheral timing at the system level; successful operation at one clock frequency does not guarantee margin across every operating condition.
Do not treat an identical package name as proof that a different STM32 MPN is a drop-in replacement. Compare boot pins, supply pins, ground pins, oscillator pins, reset behavior, debug interfaces, peripheral multiplexing, interrupt assignments, and absolute electrical limits. For STM32F469 candidates, also account for the identified 1 MB versus 2 MB Flash difference and confirm application-code capacity before making a substitution.
Production firmware and recovery procedures must be validated for every selected alternative because boot configuration, peripheral availability, memory organization, and development-tool support may differ between STM32 families. Perform boundary tests for clock startup, low-power transitions, communications recovery, analog calibration, watchdog behavior, and flash programming. Treat the manufacturer datasheet and reference manual as the release authority for both the original and proposed replacement.
Thông tin tuân thủ
The available excerpts do not state the device's RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The STM32F479IIT6 is an industrial-temperature MCU, but no AEC-Q100 qualification statement was identified.
