STM32L443VCT6 - 80MHz Cortex-M4 256KB MCU | ST
MPN: STM32L443VCT6 ✓ Hoạt độngSTM32L443VCT6 Tóm tắt
An ultra-low-power microcontroller is a semiconductor designed to perform control, measurement, and communication tasks while minimizing energy consumption. The STM32L4 series belongs to the Arm Cortex-M microcontroller hierarchy and combines a real-time processor core with embedded Flash, SRAM, analog converters, timers, communication peripherals, and low-power modes. This integration reduces the component count needed in battery-powered industrial, medical, consumer, and IoT equipment.
The STM32L443VCT6 operates from a 1.71 V to 3.6 V supply and supports temperature ranges from -40 °C to 85 °C, 105 °C, or 125 °C, depending on the exact ordering variant. Its low-power behavior includes 200 nA consumption in VBAT mode for the real-time clock and 32 backup registers, plus an 8 nA shutdown mode with five wakeup pins. These figures support designs where standby current materially affects service intervals and battery life.
The Arm Cortex-M4F architecture provides floating-point instructions alongside the MCU's 256 KB Flash and 64 KB SRAM. Integrated USB full-speed connectivity allows a compact device to exchange data with a host without an external USB transceiver. LCD support, analog functions, audio capability, and AES-2 acceleration make the device suitable for instrument panels, portable measurements, secure accessories, and connected low-power products.
Typical applications include battery-powered health monitors, USB-connected data loggers, industrial sensor nodes, LCD control panels, secure access devices, and compact consumer instruments. In these systems, the STM32L443VCT6 can consolidate local control, data acquisition, encrypted communication, and human-interface functions while retaining multiple low-energy operating states.
PCB implementation should preserve clean supply distribution, short analog-input routes, and appropriate decoupling around the device. The 100-LQFP package requires careful fanout and inspection, while USB routing, ground continuity, and exposed signal paths need to follow the layout constraints in the manufacturer datasheet. Validate power sequencing, clock configuration, firmware startup, and low-power wake behavior on the assembled board.
This product page consolidates the manufacturer's core specifications, package information, application guidance, practical design notes, and qualified same-family alternatives into a design-focused reference. It also distinguishes exact electrical differences among drop-in candidates so engineers can assess replacement suitability without changing the PCB footprint.
Bộ thay thế dễ dàng lắp đặt cho STM32L443VCT6 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
STM32L443VET6
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32L443VGT6
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32L443VCT7
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32L443VCT8
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32L443VCT6 Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M4 with FPU |
| Maximum CPU Frequency | 80 MHz |
| Peak Performance | 100 DMIPS |
| Flash Memory | 256 KB (256K x 8) |
| SRAM | 64 KB |
| Điện áp cung cấp hoạt động | 1.71 V to 3.6 V |
| VBAT Mode Current | 200 nA |
| Shutdown Mode Current | 8 nA |
| Shutdown Wakeup Pins | 5 pins |
| Backup Registers | 32 x 32-bit |
| Temperature Range Options | -40 °C to 85 °C, -40 °C to 105 °C, or -40 °C to 125 °C |
| Hộp | 100-LQFP, 14 x 14 mm |
| USB Support | USB full-speed |
| Security Accelerator | AES-2 |
| Display Support | LCD controller |
| Audio Support | Yes |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân STM32L443VCT6 100-lqfp, 14 x 14 mm
Cấu hình chân cho STM32L443VCT6 (100-lqfp, 14 x 14 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho STM32L443VCT6.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
STM32L443VCT6 phù hợp cho 6 Áp dụngs: USB Battery-Powered Data Logger, Industrial Sensor Node, LCD Instrument Control Panel, Portable Medical Monitor, Secure USB Access Device, Connected Consumer Instrument.
USB Battery-Powered Data Logger
The STM32L443VCT6 fits portable data loggers because its 80 MHz Arm Cortex-M4F core and 64 KB of SRAM handle sensor acquisition, local processing, and USB full-speed data transfer. Its 1.71 V to 3.6 V operating range supports compact 3.3 V systems, while the manufacturer reports 8 nA shutdown current with five wakeup pins. A practical implementation uses the MCU to sample sensors, timestamp records, buffer data in SRAM, and export results through USB while the shutdown state limits idle drain.
Được đề xuất
Industrial Sensor Node
The STM32L443VCT6 suits industrial sensor nodes that need local control, analog measurement, and efficient standby behavior without external memory. Its Cortex-M4F core operates up to 80 MHz, while 256 KB of Flash provides room for protocol stacks, calibration data, and diagnostics. The 100-LQFP package exposes the device’s full peripheral set in a conventional surface-mount footprint. For remote sensors, use the 200 nA VBAT capability for RTC retention and the 8 nA shutdown mode between scheduled measurement intervals.
Được đề xuất
LCD Instrument Control Panel
The STM32L443VCT6 is suitable for an LCD-based instrument because it integrates an LCD controller alongside an 80 MHz Cortex-M4F core, 256 KB of Flash, and 64 KB of SRAM. The processor can run a user interface, process operator commands, and update the display without a separate display controller. Its 1.71 V to 3.6 V supply range accommodates compact 3.3 V panel electronics. The design must follow the manufacturer’s LCD and pin-muxing requirements, including correct glass biasing and timing configuration.
Được đề xuất
Portable Medical Monitor
The STM32L443VCT6 can serve as the control processor in a portable medical monitor requiring low standby consumption and a broad set of embedded peripherals. Its Arm Cortex-M4F core supports responsive signal processing, 64 KB of SRAM accommodates working buffers, and the integrated analog and audio features reduce the need for separate interface components. The manufacturer specifies operation from 1.71 V to 3.6 V and VBAT current of 200 nA. Medical use still requires application-specific electrical safety, software validation, and quality-process assessment.
Được đề xuất
Secure USB Access Device
The STM32L443VCT6 fits secure USB access peripherals because it combines USB full-speed connectivity with an AES-2 hardware accelerator and 256 KB of Flash. The 80 MHz Cortex-M4F core can execute authentication, command processing, and device-policy logic, while 64 KB of SRAM supports transient protocol buffers. The low-power shutdown mode is valuable for credential readers and portable access hardware. Firmware should use secure boot, protected keys, correct clock services, and the manufacturer’s USB implementation guidelines.
Được đề xuất
Connected Consumer Instrument
The STM32L443VCT6 can serve as the central controller in a compact consumer instrument requiring USB connectivity, display control, and low idle power. Its integrated USB full-speed interface removes the need for a separate host controller, while the LCD, analog, audio, and AES-2 functions support feature-rich products such as programmable meters, audio accessories, and configuration tools. The 100-LQFP package is easy to route with conventional PCB tools. Firmware and power-tree design should account for active-mode current from sensors, radio modules, and displays.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho STM32L443VCT6 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | STM32L443VET6 | STM32L443VGT6 | STM32L443VCT7 | STM32L443VCT8 |
|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 100-LQFP (14x14) | 100-LQFP (14x14) | 100-LQFP (14x14) | 100-LQFP (14x14) | 100-LQFP (14x14) |
| Processor Core | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU |
| Maximum CPU Frequency | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| Flash Memory | 256 KB | 512 KB | 1 MB | 256 KB | 256 KB |
| SRAM | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB |
| Operating Supply Voltage | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V |
| USB Support | USB full-speed | USB full-speed | USB full-speed | USB full-speed | USB full-speed |
| Security Accelerator | AES-2 | AES-2 | AES-2 | AES-2 | AES-2 |
Bảo phân biệt quan trọng
- Lower Flash allocation for cost-sensitive designs (vsSTM32L443VET6)
- Balanced memory configuration for compact embedded systems (vsSTM32L443VGT6)
- Broader environmental ordering options (vsSTM32L443VCT7)
- Maximum temperature option in the same flash configuration (vsSTM32L443VCT8)
Ghi chú thiết kế
Use the STM32L443xx manufacturer datasheet to select capacitors and regulator characteristics for the 1.71 V to 3.6 V supply range. Separate sensitive analog, digital, and USB supply branches where the board architecture permits. Place the required input and bulk capacitors close to the associated supply pins, keep return-current paths compact, and measure startup and shutdown current with the same peripherals that will operate in production.
Plan the 100-LQFP footprint with the package drawing as the controlling reference. Keep oscillator, reset, and decoupling loops short, preserve continuous ground connections beneath the device, and route high-current or high-speed signals away from analog inputs. Because the part has 100 leads, check assembly clearances and probe access early. A manufacturing review against the final Gerber files is important for fine-pitch land patterns and exposed lead geometry.
Treat USB full-speed routing as a controlled interface rather than a generic low-speed connection. Follow the manufacturer’s USB routing and impedance guidance, provide a continuous ground reference, minimize stubs, and place any required series termination near the driver. Validate enumeration, suspend, resume, and bus-powered current behavior on prototypes because host compatibility depends on firmware timing, power behavior, and signal integrity together.
Do not assume that identical package dimensions guarantee that any STM32L443 ordering code is interchangeable. The VET6 and VGT6 candidates add Flash memory, while VCT7 and VCT8 change the temperature-grade ordering. Review the manufacturer pin table, alternate-function mapping, bootloader assumptions, firmware memory map, supply limits, temperature requirements, and qualification constraints before approving a substitution. A successful PCB fit alone is not sufficient for a functional replacement.
Thông tin tuân thủ
The available manufacturer pages identify the STM32L443xx family and electrical capabilities but do not explicitly state the compliance results shown here. Obtain the current STMicroelectronics product compliance and material declarations for the exact ordering code before release.