STPA001AH - Quad 4x50W Class AB Audio Amplifier | STMicroelectronics
MPN: STPA001AH ✓ Hoạt độngSTPA001AH Tóm tắt
A Class AB audio amplifier is an audio amplifier that uses conduction overlap between its output transistors to reduce crossover distortion compared with a pure Class A amplifier. In the broader electronics hierarchy, an audio amplifier belongs to amplifier ICs, analog signal-chain ICs, and semiconductor components. The bridge-tied-load arrangement uses each output stage differentially, allowing speaker current flow in both directions without a conventional DC-blocking output capacitor.
Key verified features include four output channels, Class AB operation, up to 50 W per channel as stated by distributor listings, a 27-pin horizontal Flexiwatt package, standby and mute control, clip detection, and offset detection. The standby function can place the amplifier into a low-power state, while mute supports controlled audio attenuation. Clip and offset detection give the surrounding controller useful status signals for protecting the output stage or diagnosing abnormal operation.
The STPA001 family uses MOSFET technology for its audio output stage and targets automotive head units, where four speakers or multiple powered speaker channels are common. Compared with an external discrete amplifier made from many transistors and resistors, the integrated quad amplifier reduces board area and assembly effort. Its principal engineering trade-off is substantial heat: actual channel power depends on supply voltage, speaker impedance, distortion limit, thermal conditions, and PCB copper, none of which is fully specified in the supplied data.
Typical applications include car-radio head units, automotive infotainment systems, four-speaker cabin audio, powered multimedia enclosures, and low-voltage high-power audio racks when the thermal and supply conditions match the complete manufacturer specification. Each speaker output must connect to a bridge-tied load; grounding either speaker terminal to chassis ground is not an equivalent wiring method.
Before layout, obtain the manufacturer datasheet and verify the exact pinout, supply limits, speaker impedance, output-power conditions, thermal resistance, protection limits, exposed-tab connection, and decoupling requirements. Keep the power ground and output-current paths compact, use the prescribed input and bypass capacitors, and thermally couple the horizontal Flexiwatt tab to the PCB copper according to the manufacturer layout guidance.
This page consolidates verified distributor descriptions, sourcing information, application context, and design cautions. Parameters not present in the supplied sources remain explicitly marked for verification rather than being inferred from generic Flexiwatt or Class AB amplifier data.
Bộ thay thế dễ dàng lắp đặt cho STPA001AH — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với STPA001AH (cùng hình factor và footprint) — khác nhau ở Package.
STPA001A
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →STPA001AH Tỷ lệ tối đa & tính chất điện
| Amplifier Type | Quad Class AB audio power amplifier |
| Number of Channels | 4 channels |
| Rated Output Power | 4 x 50 W |
| Cấu hình đầu ra | Quad bridge-tied-load |
| Output Transistor Technology | MOSFET |
| Standby Control | Standby input |
| Mute Control | Mute input |
| Diagnostic Functions | Clip detection and offset detection |
| Hộp | 27-Flexiwatt horizontal |
| Số chân | 27 pins |
| Trạng thái RoHS | Compliant |
Hướng dẫn cấu hình chân STPA001AH 27-flexiwatt horizontal
Cấu hình chân cho STPA001AH (27-flexiwatt horizontal gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho STPA001AH.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
STPA001AH phù hợp cho 6 Áp dụngs: Automotive Head Unit, Four-Speaker Automotive Cabin Audio, Automotive Infotainment Amplifier, Powered Multimedia Speaker, Low-Voltage High-Power Audio System, Automotive Audio Test and Diagnostic Fixture.
Automotive Head Unit
The STPA001AH fits a high-power car-radio head unit because verified sources identify a four-channel Class AB MOSFET amplifier with 4 x 50 W listed capability in a horizontal 27-Flexiwatt package. The quad output reduces the number of discrete power stages required for four speakers. Standby and mute support controlled system states, while clip and offset detection can assist system diagnostics. The engineer must still verify battery range, speaker impedance, thermal resistance, and automotive qualification in the manufacturer datasheet.
Được đề xuất
Four-Speaker Automotive Cabin Audio
The STPA001AH's four-channel quad bridge-tied-load architecture is appropriate when a vehicle cabin requires independent amplification for multiple loudspeakers. Its listed Class AB output class and MOSFET stage target high-power audio rather than a low-power signal-level application. Bridge outputs must drive each speaker differentially and must not be treated as conventional grounded outputs. Speaker impedance, channel power conditions, idle current, and maximum distortion remain unverified in the supplied data.
Được đề xuất
Automotive Infotainment Amplifier
The STPA001AH can serve as the integrated output stage of an automotive infotainment or radio system requiring multiple powered channels. Its verified standby input allows a system-level shutdown path, mute provides audible signal control, and clip plus offset detection expose conditions for controller monitoring. Integration simplifies the PCB compared with four discrete power amplifiers, although layout must preserve the manufacturer's high-current power-ground and output-loop requirements.
Được đề xuất
Powered Multimedia Speaker
The STPA001AH may be used in a powered multimedia enclosure or compact audio console when four high-power channels and the verified 4 x 50 W class are required. The horizontal Flexiwatt package is intended for thermal conduction into PCB copper or an appropriate thermal interface. Mute supports source transitions, while standby can reduce power when the system is inactive. The enclosure must be engineered around real thermal dissipation rather than the marketing power figure alone.
Được đề xuất
Low-Voltage High-Power Audio System
The verified device description explicitly characterizes the STPA001 as a low-voltage, high-sound-quality quad BTL output amplifier for high-power audio, making STPA001AH relevant to low-voltage multi-channel systems. Bridge-tied operation can eliminate conventional speaker output coupling capacitors when the load is correctly connected. Designers must verify the allowed supply range, speaker impedance, channel-balance limits, and thermal conditions before defining the system power budget.
Được đề xuất
Automotive Audio Test and Diagnostic Fixture
The STPA001AH's standby, mute, clip-detection, and offset-detection features are useful in an automotive audio validation fixture that exercises speaker channels and monitors abnormal conditions. The four-channel architecture can reduce duplicated test circuitry compared with separate amplifier modules. Clip detection can help identify overdrive events, while offset detection can flag DC-related anomalies. Threshold polarity and fault behavior must be confirmed directly from the manufacturer datasheet.
Được đề xuất
Dữ liệu tham khảo kỹ thuật cho STPA001AH — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | STPA001A |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | 27-Flexiwatt horizontal | 27-Flexiwatt horizontal |
Bảo phân biệt quan trọng
- Integrated four-channel high-power audio output (vsDiscrete four-channel Class AB output design)
- Built-in system-control and diagnostic functions (vsBasic power amplifier without verified status controls)
- Verified automotive audio positioning (vsGeneral-purpose low-power audio amplifier)
Ghi chú thiết kế
Do not size cooling from the 4 x 50 W listing alone. Estimated: actual dissipation depends on the verified supply voltage, output waveform, speaker impedance, and distortion target, none of which are supplied. Obtain the manufacturer thermal data, couple the Flexiwatt tab to the specified copper area, and validate maximum junction temperature with all four channels operating under worst-case audio content.
Keep each bridge-tied speaker loop compact and connect every load differentially between its two outputs. Do not ground either side of a bridge output. Route high-current supply and ground paths with short, wide traces or planes sized from measured output current, and place the manufacturer-prescribed bypass capacitors close to their pins to limit switching transients and unstable output-stage behavior.
The supplied results do not include a complete STPA001AH pin table, so board work must use the manufacturer datasheet rather than another Flexiwatt variant. Confirm power pins, exposed-tab connection, analog inputs, standby and mute polarity, and diagnostic outputs. A zero reading on a marketplace page does not mean the part is free or unavailable; request a current written quotation before comparing cost.
Thông tin tuân thủ
The alternatives cross-reference result states RoHS Compliant. It does not establish REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.
