SY87739LHY - 729MHz Fractional-N Synthesizer | Microchip
MPN: SY87739LHY ✓ Hoạt độngSY87739LHY Tóm tắt
A fractional-N synthesizer is a phase-locked-loop timing device that derives an output frequency from a stable reference clock using programmable division ratios. The SY87739LHY belongs to the fractional-N synthesizer hierarchy, PLL-based clock generator family, and broader clock and timing IC category. Its protocol-transparent architecture allows a system to synthesize common data-transport reference rates without using a separate dedicated clock generator for every standard.
The primary features include operation from a 3.3V supply, a 27MHz reference input, and output coverage extending to 729MHz. Two tandem PLL circuits provide the frequency synthesis functions: a modified fractional-N stage produces rational-ratio frequencies, while a second integer-ratio stage can adjust the resulting output. Differential PECL outputs are suited to high-speed optical, serial, and telecommunications systems requiring a low-noise clock reference.
The device can generate exact reference frequencies used by common transport protocols, including configurations with or without forward error correction. The first PLL supports protocol rates except those containing FEC or digital-wrapper overhead, while the second PLL provides an additional output adjustment stage. This architecture offers design flexibility while preserving a single-reference-clock implementation, reducing the number of separate oscillator and divider chains required in a communication line card.
Typical applications include Ethernet and Fibre Channel line interfaces, SONET/SDH/ATM transponders, optical communication modules, network timing subsystems, and high-speed serial backplanes. The 729MHz upper limit supports demanding serial links, while the 10MHz lower limit permits synthesis of lower-rate references for adjacent digital circuitry.
PCB implementation should preserve short, impedance-controlled routes for the differential PECL clock outputs and provide a continuous ground reference beneath the exposed pad. Input and output return paths should avoid shared-current coupling with switching supplies. Decoupling capacitors should be placed directly across the device supply pins according to the manufacturer layout guidance, while the exposed pad requires thermal vias and adequate copper area.
This page combines the manufacturer description with package, protocol, frequency, and sourcing details while separating engineering guidance from basic catalog data. It also identifies the verified pin-compatible family options and the unresolved qualification details that should be confirmed before production substitution.
Bộ thay thế dễ dàng lắp đặt cho SY87739LHY — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với SY87739LHY (cùng hình factor và footprint) — khác nhau ở Package, Product Type.
SY87739LHI
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →SY87739LHY-TR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
SY87739LHY Thông số kỹ thuật
| Product Type | Protocol-transparent fractional-N clock synthesizer |
| Điện áp cung cấp | 3.3 V |
| Reference Input Frequency | 27 MHz |
| Output Frequency Range | 10 MHz to 729 MHz |
| Maximum Output Frequency | 729 MHz |
| Minimum Output Frequency | 10 MHz |
| Cấu hình đầu ra | Differential PECL |
| Number of Clock Outputs | 1 output |
| PLL Architecture | 2 tandem PLL stages |
| Synthesis Method | Fractional-N and integer-ratio frequency synthesis |
| Protocol Support | Ethernet, Fibre Channel, SONET, SDH, and ATM reference frequencies |
| FEC Handling | Supported through the second PLL architecture |
| Hộp | 32-pin TQFP with exposed pad, 7 mm x 7 mm |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân SY87739LHY 32-pin tqfp with exposed pad, 7 mm x 7 mm
Cấu hình chân cho SY87739LHY (32-pin tqfp with exposed pad, 7 mm x 7 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho SY87739LHY.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
SY87739LHY phù hợp cho 6 Áp dụngs: Fibre Channel Optical Interfaces, Ethernet Line-Card Clocking, SONET and SDH Transponders, Optical Communication Modules, High-Speed Serial Backplanes, Network Timing Subsystems.
Fibre Channel Optical Interfaces
The SY87739LHY is appropriate for Fibre Channel timing subsystems because its fractional-N architecture generates protocol-relevant reference frequencies from a single 27MHz source and delivers them as differential PECL. The 10MHz-to-729MHz range covers low-rate references through high-speed serial-interface clocks. Two tandem PLL stages provide additional rational-ratio adjustment for rates that cannot be handled by the first stage alone, including configurations affected by FEC or digital-wrapper overhead. This architecture can simplify the clock tree in an optical line card by reducing separate oscillators and divider chains. The design must still be validated against the channel's jitter budget, reference-output amplitude, and propagation requirements.
Được đề xuất
Ethernet Line-Card Clocking
The SY87739LHY supports Ethernet line-card clock generation where a single 27MHz reference must support several related data rates. Its protocol-transparent fractional-N method generates rational-ratio clock outputs, and the second PLL stage supplies additional output adjustment where protocol overhead complicates the desired ratio. Differential PECL output is suited to high-speed serializer and transceiver circuitry requiring short, controlled clock links. The synthesizer can reduce board area compared with multiple dedicated oscillator-and-divider chains. Before deployment, verify the exact Ethernet variant, required reference frequency, jitter limit, and whether the transceiver expects PECL or another differential logic standard.
Được đề xuất
SONET and SDH Transponders
The SY87739LHY is well suited to SONET, SDH, and ATM transport equipment because the manufacturer identifies these protocols among the frequencies supported by the device. It synthesizes differential PECL clocks up to 729MHz from one 27MHz oscillator, allowing a transponder clock tree to cover both low-rate references and high-speed line rates. The first fractional-N PLL handles rational-ratio generation, while the second P/Q synthesizer extends adjustment for complex protocol cases. This can reduce the number of independent clock sources and simplify synchronization across transmit and receive paths. Final qualification should include jitter, cycle-to-cycle noise, output duty-cycle, and loss-of-reference behavior for the specific transport standard.
Được đề xuất
Optical Communication Modules
The SY87739LHY fits optical communication modules requiring a compact, programmable clock source for a high-speed serializer or transceiver. Its differential PECL output reaches 729MHz, while the 10MHz lower limit allows the same device to support slower local references. Deriving multiple related frequencies from one 27MHz source can improve board-area efficiency and reduce clock-distribution complexity in dense optical assemblies. The protocol-transparent fractional-N method is particularly useful where the module must support several data rates or internal divider ratios. Designers should confirm PECL compatibility at the destination device, provide compliant termination, and use short matched routing to limit deterministic jitter.
Được đề xuất
High-Speed Serial Backplanes
The SY87739LHY can provide a programmable reference for high-speed serial backplane and data-conversion subsystems that need frequencies derived from a stable 27MHz clock. The wide 10MHz-to-729MHz synthesis range supports both system references and high-speed communication clocks, while differential PECL provides a common interface for many older high-speed logic families. The fractional-N approach offers finer frequency selection than a fixed integer divider and can consolidate multiple clock requirements into one IC. Engineering validation should compare the synthesizer's jitter and spur performance with the complete receiver and transmitter budget. PCB routing also requires controlled differential impedance and a low-impedance return path beneath the clock pair.
Được đề xuất
Network Timing Subsystems
The SY87739LHY is useful in network timing subsystems where multiple derived frequencies are required for synchronization, interface, and monitoring blocks. A single 27MHz reference can feed the fractional-N architecture to generate outputs from 10MHz to 729MHz, avoiding several independent oscillators and their associated calibration paths. The protocol-transparent feature allows standard transport frequencies to be produced without a dedicated generator for every rate. Differential PECL outputs suit equipment built around high-speed ECL-family interfaces. The design must account for reference-jitter multiplication, loop filtering, output buffer delay, and synchronization across the clock tree. Environmental and compliance requirements should be confirmed for the finished network equipment.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho SY87739LHY — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | SY87739LHI | SY87739LHY-TR |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 32-TQFP with exposed pad (7x7 mm) | 32-TQFP with exposed pad (7x7 mm) | 32-TQFP with exposed pad (7x7 mm) |
| Product Type | Protocol-transparent fractional-N clock synthesizer | Fractional-N clock synthesizer | Protocol-transparent fractional-N clock synthesizer |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V |
| Reference Input | 27 MHz | 27 MHz | 27 MHz |
| Output Frequency Range | 10 MHz to 729 MHz | 10 MHz to 729 MHz | 10 MHz to 729 MHz |
| Output Type | Differential PECL | Differential PECL | Differential PECL |
| Number of Outputs | 1 output | 1 output | 1 output |
| PLL Architecture | 2 tandem PLL stages | 2 tandem PLL stages | 2 tandem PLL stages |
Bảo phân biệt quan trọng
- Broad programmable frequency coverage from one reference (vsSY87739LHI)
- Direct production packaging alternative (vsSY87739LHY-TR)
- Two-stage synthesis for complex protocol rates (vsSY87739LHI)
Ghi chú thiết kế
Place the 27MHz reference network and decoupling capacitors close to the relevant SY87739LHY pins, following the manufacturer layout pattern. Route differential PECL outputs as short impedance-controlled pairs with uninterrupted reference planes. Avoid routing clock traces beneath noisy power converters or adjacent to high-current switching nodes because deterministic coupling can increase jitter even when the PLL is operating correctly.
The exposed pad must be connected to ground with multiple thermal vias and continuous copper rather than treated as an unused terminal. Keep thermal-via placement consistent with the manufacturer's footprint while avoiding via stubs on sensitive differential clock traces. Although the synthesizer is not a high-power regulator, reliable pad heat removal helps maintain stable performance across the device's intended operating range.
Use the manufacturer's differential PECL termination and interface recommendations at the receiving device and confirm the board's differential impedance against the actual trace geometry. Keep the reference clock path short and preserve controlled return paths beneath both clock conductors. Validate eye margin, deterministic jitter, and spurious content at the actual receiver because a clean synthesis ratio alone does not guarantee signal integrity.
Do not select a replacement solely because it covers 10MHz to 729MHz. The replacement must also use a 27MHz reference, provide differential PECL at the same pins, share the 32-TQFP exposed-pad footprint, and accept the same programming scheme. For SY87739LHI, confirm temperature grade and qualification; for SY87739LHY-TR, confirm that reel packaging matches the assembly process.
Thông tin tuân thủ
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for this exact MPN. Confirm current declarations with Microchip before production release.
