Texas Instruments

TMS320C31PQA40 - 40 MHz Floating-Point DSP | Texas Instruments

MPN: TMS320C31PQA40 ✓ Hoạt động
132-pin BQFP Package 40 MHz Speed
MOQ: 1 |

TMS320C31PQA40 Tóm tắt

The Texas Instruments TMS320C31PQA40 is a 32-bit floating-point digital signal processor operating at 40 MHz in a 132-pin BQFP package measuring 24.13 mm by 24.13 mm. It is designed for high-performance signal-processing workloads requiring floating-point arithmetic, parallel processing, and deterministic instruction execution.

A digital signal processor is a specialized microprocessor architecture optimized for real-time mathematical operations on sampled signals. Unlike a general-purpose processor, the TMS320C31 architecture is designed to accelerate filtering, Fourier analysis, waveform generation, control calculations, and other high-throughput numerical tasks. The TMS320C31PQA40 belongs to the Texas Instruments C3x floating-point DSP family and combines a 32-bit floating-point capability with a parallel-processing architecture.

The device is identified as a 40 MHz floating-point DSP with a 132-pin BQFP package. Distributor listings describe it as a 32-bit processor supporting 20 MIPS, while the TMS320C31 datasheet material lists a 40 ns instruction cycle, 275 MOPS, 50 MFLOPS, and 25 MIPS for the 40 MHz operating point. These figures describe computational throughput under the stated instruction mix and should not be treated as equivalent to general-purpose processor benchmarks.

The C3x architecture is intended for applications in communications, audio processing, industrial measurement, embedded control, and instrumentation. Floating-point operation is particularly useful when algorithms require a wide dynamic range, intermediate precision, or values that are difficult to represent efficiently in fixed-point arithmetic. External memory and programmable I/O interfaces allow the processor to acquire and process data outside the device itself.

The 132-pin BQFP package provides a substantial lead count for external memory, bus, and peripheral connections, but it also requires careful PCB layout. The large 24.13 mm by 24.13 mm body is not a compact surface-mount footprint. Designers should preserve the manufacturer-recommended decoupling, routing, and thermal-management practices described in the TMS320C31 datasheet.

When integrating the TMS320C31PQA40, verify the clock source, memory interface, peripheral mapping, and software toolchain against the system requirements. The processor is selected when a legacy C3x floating-point design, established software investment, or exact continuation of an existing platform is more important than the integration advantages of a newer DSP or MCU.

Bộ thay thế dễ dàng lắp đặt cho TMS320C31PQA40 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

TMS320C31PQA

✅ Drop-In
📦 132-pin BQFP (24.13 x 24.13 mm)
Same TMS320C31 C3x family and PQ package designation, but the PQA40 speed suffix is 40 MHz and the PQA clock grade must be verified before substitution

📋 Tham chiếu thay thế (không có trong danh mục)

TMS320C31PQA40 Thông số kỹ thuật

Device Type Floating-point digital signal processor (DSP)
Core Architecture C3x floating-point architecture
Processor Word Length 32 bit
Tần số xung maksimum 40 MHz
Instruction Cycle Time 40 ns
Instruction Throughput 20 MIPS
Operation Rate 275 MOPS
Floating-Point Throughput 50 MFLOPS
Package Type 132-pin BQFP
Package Dimensions 24.13 mm x 24.13 mm
Kiểu lắp đặt Surface mount

Hướng dẫn cấu hình chân TMS320C31PQA40 24.13 mm x 24.13 mm

Cấu hình chân cho TMS320C31PQA40 (24.13 mm x 24.13 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 24.13 mm x 24.13 mm cho TMS320C31PQA40

Không có dữ liệu chân cụ thể sẵn có cho TMS320C31PQA40.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

TMS320C31PQA40 phù hợp cho 6 Áp dụngs: Digital Audio Signal Processing, Communications and Modulation, Industrial Control Loops, Test and Measurement Instrumentation, Vibration and Condition Monitoring, Legacy Platform Refresh.

🎧

Digital Audio Signal Processing

The TMS320C31PQA40 fits digital audio processing chains that benefit from 32-bit floating-point arithmetic, including equalization, mixing, filtering, and dynamic-range processing. At 40 MHz, the processor provides a 40 ns instruction cycle while the C3x architecture handles numerical operations in parallel. Its 132-pin BQFP interface supports the external memory and peripheral connections typically required by a multi-channel audio subsystem. Engineers should budget deterministic interrupt latency, avoid cache-dependent assumptions because this is an older DSP architecture, and verify that the audio algorithm and sample rate fit within the available instruction cycles.

🌐

Communications and Modulation

The TMS320C31PQA40 is applicable to communications equipment that performs filtering, modulation, demodulation, or spectral analysis on sampled data. Its floating-point execution supports algorithms with substantial dynamic range without the repeated scaling decisions required by a fixed-point implementation. The 40 MHz clock and published C3x throughput provide a practical starting point for fixed-channel systems, while the 132-pin BQFP package offers ample external bus and I/O connectivity. A practical design must account for memory wait states, burst-transfer timing, and the computational overhead of synchronization and framing.

🏭

Industrial Control Loops

The TMS320C31PQA40 can implement high-speed control and measurement algorithms where floating-point math improves implementation speed and robustness. The 20 MIPS listed instruction throughput is useful for proportional, derivative, integral, filtering, and state-space calculations that must complete within a fixed sampling interval. External memory can hold coefficient tables and control code, while the broad pin count supports bus, timer, and peripheral connectivity. Engineers should measure worst-case execution time, disable unused peripherals to reduce interference, and separate sensitive analog front ends from the digital switching activity of the processor board.

📟

Test and Measurement Instrumentation

The TMS320C31PQA40 suits laboratory and industrial instrumentation that performs real-time filtering, calibration, or waveform analysis. Floating-point arithmetic allows calibration coefficients and intermediate values to be retained across a wide numerical range, which is valuable when the instrument mixes small and large signal components. The 40 MHz operating point and external memory interface support deterministic acquisition and processing, while the 132-pin package provides access to multiple peripheral functions. Design work should include fixed-point saturation analysis for downstream converters, trigger-latency measurement, and isolation of analog input sections from high-speed digital routing.

🧭

Vibration and Condition Monitoring

The TMS320C31PQA40 can process accelerometer, microphone, or transducer streams for vibration analysis, spectral estimation, and event detection. The floating-point architecture is particularly useful when filter coefficients span several orders of magnitude or when the analysis chain includes rescaling between stages. At 40 MHz, the processor can execute multiple filter and transform operations between acquisition events, subject to memory bandwidth and algorithm complexity. The analog front end should include anti-aliasing protection, and the digital design should use deterministic interrupt service routines and verified timing margins for each spectral frame.

🔧

Legacy Platform Refresh

The TMS320C31PQA40 is a strong choice for a legacy platform refresh that must preserve a proven C3x control flow, floating-point routines, and board architecture. Its 40 MHz grade provides a defined performance target for software originally written for the TMS320C31 family, avoiding the functional and timing uncertainty of a wholesale processor migration. The 132-pin BQFP footprint remains a constraint on compact new designs, so replacement planning should include schematic parity, memory-device timing checks, boot-code compatibility, and regression testing of every interrupt-driven channel.

What is the TMS320C31PQA40?
The TMS320C31PQA40 is a Texas Instruments 32-bit floating-point digital signal processor with a 40 MHz clock, 20 MIPS instruction throughput, and a 132-pin BQFP package. According to the TMS320C31 datasheet listing, its 40 MHz operating point corresponds to a 40 ns instruction cycle, 275 MOPS, 50 MFLOPS, and 25 MIPS. It is intended for real-time signal-processing, control, communications, audio, and instrumentation systems.
What package does the TMS320C31PQA40 use?
The TMS320C31PQA40 uses a 132-pin BQFP package with body dimensions of 24.13 mm by 24.13 mm. This package is a large surface-mount quad flat pack, so PCB land patterns, via-in-pad or fanout strategies, and assembly thermal profiles must be checked against the manufacturer package drawing. Pin functions and the complete pin description should be taken from the TMS320C31 datasheet.
Where can I download the TMS320C31PQA40 datasheet PDF?
The TMS320C31PQA40 datasheet PDF is available through the Texas Instruments datasheet listing at alldatasheet.com, where the document is identified as a 48-page digital signal processor datasheet. Use the manufacturer datasheet as the authoritative source for pinout, timing, electrical characteristics, memory interfaces, and application information before finalizing a PCB or firmware design.
Where can I find the TMS320C31PQA40 pinout?
The TMS320C31PQA40 pinout is documented in the pin-description section of the TMS320C31 datasheet. The part is a 132-pin BQFP device, but the verified product listing does not reproduce all 132 pin names, so the pinout is left unpopulated on this page rather than guessed. Use the manufacturer pin table and package drawing when assigning every PCB track and test point.
Is TMS320C31PQA40 a floating-point DSP?
Yes, the TMS320C31PQA40 is a floating-point digital signal processor based on the Texas Instruments C3x architecture. Distributor and manufacturer listings identify it as a 32-bit floating-point DSP rated at 40 MHz. Floating-point arithmetic is useful in filters, transforms, control loops, and signal chains where fixed-point scaling would otherwise consume significant engineering effort.
How fast is the TMS320C31PQA40?
The TMS320C31PQA40 operates at 40 MHz and has a 40 ns instruction cycle. The published TMS320C31 material lists 275 MOPS, 50 MFLOPS, and 25 MIPS for this speed grade, while the distributor product description lists 20 MIPS. These figures depend on the instruction mix and measurement convention, so they should not be compared directly with clock-rate specifications of modern MCUs.
What can replace the TMS320C31PQA40?
The closest documented same-family replacement is the Texas Instruments TMS320C31PQA, which shares the C3x DSP family and the same PQ package naming, but its clock grade and electrical details must be checked before substitution. The TMS320C32PCMA50 and TMS320VC33PGE120 appear in web comparison material, but they use different packages and are therefore not pin-to-pin drop-in replacements.
Is the TMS320C31PQA40 the same as the TMS320C31PQA?
The TMS320C31PQA40 is a specific 40 MHz C3x DSP ordering variant, while the TMS320C31PQA is the related family member listed in the TMS320C31 documentation. They are not automatically interchangeable: the clock-speed suffix, temperature grade, and orderable package must be matched to the original assembly drawing and bill of materials before treating the difference as a drop-in change.
TMS320C31PQA40 vs TMS320C32PCMA50 - which is better?
The TMS320C31PQA40 is the appropriate choice when an existing design requires the original C3x 132-pin PQ package and established software. The TMS320C32PCMA50 offers a 50 MHz clock and the same general C3x floating-point architecture, but it uses a PGA-144 package, so it is not a direct drop-in replacement. It is appropriate only when the board, memory interface, and pin assignment are redesigned.
TMS320C31PQA40 vs TMS320VC33PGE120 - which one should I choose?
Choose the TMS320C31PQA40 for a legacy C3x platform with a 132-pin BQFP footprint, or choose the TMS320VC33PGE120 for a new C3x-based design that can be adapted to its lower supply voltage and different pin arrangement. The cross-reference material describes the VC33 as a more advanced C3x core, but it is not pin-compatible with the PQA40 package.
When should I choose the TMS320C31PQA40 over a newer DSP?
Choose the TMS320C31PQA40 when maintaining an existing C3x design, reusing legacy floating-point code, or avoiding a board and software requalification is more important than adopting newer peripherals. A modern MCU or DSP may provide smaller packages, lower power consumption, faster peripherals, and better development tools, but that advantage is realized only after a deliberate hardware and firmware migration.
Is the TMS320C31PQA40 suitable for real-time signal processing?
The TMS320C31PQA40 is suitable for real-time floating-point signal processing at its 40 MHz operating point. Its architecture and published throughput are intended for filters, transforms, waveform processing, and control computations. Real-time suitability still depends on the algorithm's instruction count, memory wait states, interrupt overhead, and the timing margin of the complete system.
What is the best Texas Instruments equivalent for TMS320C31PQA40?
The best documented Texas Instruments near-equivalent is the TMS320C31PQA because it belongs to the same TMS320C31 C3x family and uses the PQ package designation. The TMS320C32PCMA50 and TMS320VC33PGE120 are functional alternatives in the broader C3x ecosystem, but their PGA-144 and PGE packages require redesign. Confirm clock grade, temperature range, and pin-level compatibility before ordering a substitute.
Where can I buy the TMS320C31PQA40?
Use the Request a Quote form on this page to request current pricing, stock, and lead time for the TMS320C31PQA40. The verified product listings identify authorized distribution activity and manufacturer documentation, but no quantity-break prices were captured for this exact MPN. A formal quote also lets the supplier confirm the 132-pin BQFP package, speed suffix, and delivery configuration.
What is the price of the TMS320C31PQA40?
The current price of the TMS320C31PQA40 is returned through the Request a Quote form on this page rather than as a static figure. Pricing for this legacy DSP depends on quantity, sourcing channel, and availability, and no exact-MPN quantity-break table was verified. Request a quote for the required quantity and tape, tray, or other delivery format.
What is the lead time and stock status of the TMS320C31PQA40?
Current lead time and stock status for the TMS320C31PQA40 are handled through the Request a Quote form on this page. The verified listing states that the part ships today, but that statement is not treated as a live inventory guarantee and no fixed lead time is published in the captured product data. Request a written confirmation for the exact package and order quantity.

Dữ liệu tham khảo kỹ thuật cho TMS320C31PQA40 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the TMS320C31PQA40 when maintaining an existing TMS320C31 floating-point design, preserving a 132-pin BQFP layout, or reusing validated C3x code. The documented TMS320C31PQA is the closest same-family candidate, but verify its clock grade, temperature rating, and exact orderable configuration before treating it as interchangeable. The TMS320C32PCMA50 can offer higher clock speed within the broader C3x ecosystem, yet its different package and memory-interface arrangement require board redesign. The TMS320VC33PGE120 is more appropriate for a new C3x-based platform that can accommodate its lower supply voltage and different pinout. For new compact, low-power, or highly connected products, a modern MCU or DSP may be the better starting point; for lifecycle extension of an installed C3x platform, the PQA40 usually offers lower migration risk.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này TMS320C31PQA
Brand Texas Instruments Texas Instruments
Package 132-pin BQFP (24.13 x 24.13 mm) PQ package designation
Processor Type Floating-point digital signal processor Floating-point digital signal processor
Core Architecture C3x C3x

Bảo phân biệt quan trọng

  • Defined 40 MHz speed grade in the PQ package (vsTMS320C31PQA)
  • Established 132-pin BQFP platform continuity (vsTMS320C32PCMA50)
  • Direct continuation of the original C3x design (vsTMS320VC33PGE120)

Ghi chú thiết kế

Follow the TMS320C31 datasheet layout recommendations for decoupling, clock routing, memory-interface topology, and ground-plane continuity. The 132-pin BQFP package leaves ample space for component placement, but its long external-memory connections can make routing sensitive to crosstalk and impedance discontinuities. Place bulk and high-frequency decoupling close to the relevant supply pins, and use the package drawing rather than a generic BQFP footprint when defining the land pattern.

Treat the processor clock and external-memory buses as high-speed signals even though the architecture is older. Match clock and memory traces to the intended topology, minimize stub branches, and keep the clock source away from switching regulators and analog input stages. Because the exact memory-interface timing is not reproduced on this page, derive setup and hold requirements, idle states, and wait-state behavior directly from the TMS320C31 datasheet.

Do not treat the TMS320C32PCMA50 or TMS320VC33PGE120 as direct drop-in replacements: both use different packages. A C3x software port also does not guarantee electrical or timing equivalence because clock speed, supply voltage, memory interfaces, and peripheral assignments may differ. For a replacement project, create a pin-by-pin parity matrix, reproduce the memory and clock schematics, and regression-test floating-point results and interrupt timing before releasing the substitution.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was included in the verified product data. The 132-pin BQFP package is not by itself evidence of AEC-Q100 qualification.

Dữ liệu được xác minh vào: 2026-11-10 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

TMS320C31PQA40 TMS320C31PQA40 datasheet TMS320C31PQA40 datasheet pdf TMS320C31PQA40 pinout TMS320C31PQA40 specifications TMS320C31PQA40 40MHz floating point DSP TMS320C31PQA40 132 pin BQFP Texas Instruments TMS320C31PQA40 TMS320C31PQA40 drop-in replacement TMS320C31PQA40 equivalent TMS320C31PQA40 vs TMS320C31PQA TMS320C31PQA40 price TMS320C31PQA40 stock TMS320C31PQA40 lead time

Các bộ phận và thuật ngữ liên quan

Texas Instruments TMS320C31PQA40 TMS320C31PQA TMS320C32PCMA50 TMS320VC33PGE120 digital signal processor DSP floating-point processor C3x architecture Texas Instruments C3x signal processing digital filter real-time processing 132-pin BQFP quad flat package surface-mount package 40 MHz clock 40 ns instruction cycle 20 MIPS 275 MOPS 50 MFLOPS embedded processor semiconductor external memory interface
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ