TS556IN - Dual 2.7 MHz CMOS Timer | STMicroelectronics
MPN: TS556IN ✓ Hoạt độngTS556IN Tóm tắt
A programmable timer is an oscillator-and-triggering circuit that produces a timed output pulse. A 555-type timer belongs to the clock and timing IC hierarchy: timer and oscillator > programmable timer > clock and timing integrated circuit > semiconductor. In monostable mode, one trigger produces a pulse of a defined duration. In astable mode, the two internal comparators and flip-flop repeatedly charge and discharge an external timing capacitor, creating continuous pulses. Two independent timer sections can therefore control separate events or generate related timing sequences.
The TS556IN combines several useful characteristics for timer applications. Its maximum astable frequency is 2.7 MHz, allowing short timing periods when supported by suitable external resistors and capacitors. The verified operating-voltage information identifies a 2 V minimum supply and a 16 V maximum supply for TS556IN. Additional family-level features include high output-current capability, reduced supply-current spikes during output transitions, and compatibility with bipolar NE555 implementations. The reported operating-temperature range is -40 °C to +125 °C, supporting industrial-temperature designs.
Internally, the TS556 is a CMOS implementation of the classic dual-timer architecture. Each section uses voltage thresholds, a discharge transistor, and an output stage to compare an external capacitor voltage with control levels derived from the supply voltage. CMOS operation is principally valuable for low supply consumption and reduced switching activity compared with the bipolar NE555. Designers must still account for timing-component tolerance, output rise and fall behavior, and the maximum astable frequency when setting high-frequency operating conditions.
Typical uses include pulse generation, delay and retrigger circuits, periodic switching, lamp and motor control, low-frequency oscillators, and two-channel industrial timing systems. TS556IN is particularly appropriate where a through-hole 14-DIP footprint and dual timer are required rather than a surface-mount package. In an astable oscillator, external R-A, R-B, and capacitor C values determine the repetition rate and duty cycle; the 2.7 MHz maximum frequency is an important upper-bound constraint for high-speed timing designs.
The primary design consideration is preserving the 555-compatible timing architecture while allowing adequate tolerance and ESR for the selected capacitor. Place timing components close to the device, keep discharge-current paths compact, and avoid excessive loading of the threshold and trigger nodes. Because the part is supplied in a through-hole DIP package, board spacing, connector accessibility, and thermal performance should be checked before using it in new compact designs.
This product page consolidates verified distributor specifications, manufacturer-family information, application guidance, packaging details, and available replacement references. It distinguishes directly documented TS556IN characteristics from family-level or distributor-supplied information and explicitly identifies data that remains unavailable, allowing engineers to make sourcing and design decisions without relying on unverified assumptions.
Bộ thay thế dễ dàng lắp đặt cho TS556IN — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
TLC556IN
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
TS556IN Thông số kỹ thuật
| Timer Type | 555 Type, Timer/Oscillator (Dual) IC |
| Number of Timer Sections | 2 |
| Technology | CMOS |
| Maximum Astable Frequency | 2.7 MHz |
| Minimum Supply Voltage | 2 V |
| Maximum Supply Voltage | 16 V |
| TS556 Family Voltage Range | Up to +18 V |
| Typical Supply Current | 100 µA at VCC = 5 V |
| TS556 Family Typical Supply Current | 220 µA at VCC = 5 V |
| Khoảng nhiệt độ hoạt động | -40 °C to +125 °C |
| Hộp | 14-DIP (0.300 inch, 7.62 mm) |
| Số lượng chân | 14 pins |
| Kiểu lắp đặt | Through-hole |
| Packaging Type | Tube |
| Compatibility | Pin-to-pin and functionally compatible with bipolar NE555 |
| Output Capability | High output current capability |
| Supply Current Spike Behavior | Reduced during output transitions |
| Datasheet Length | 11 pages |
Hướng dẫn cấu hình chân TS556IN 14-dip (0.300 inch, 7.62 mm)
Cấu hình chân cho TS556IN (14-dip (0.300 inch, 7.62 mm) gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho TS556IN.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
TS556IN phù hợp cho 6 Áp dụngs: Industrial Pulse and Delay Generation, Astable Oscillator and Clock Generation, LED Flashing and Indicator Control, Motor and Solenoid Control, Power-Supply and Monitoring Timing, Audio and Communication Tone Generation.
Industrial Pulse and Delay Generation
The TS556IN fits industrial pulse-generation and time-delay circuits because it provides two independent 555-type timer sections, a 2.7 MHz maximum astable frequency, and a reported -40 °C to +125 °C operating range. Each section can be configured as a monostable or astable timer to produce fixed-duration events or repetitive pulses. The CMOS implementation also addresses low-power operation, with one verified datasheet excerpt quoting 100 µA typical supply current at VCC = 5 V. In a delay circuit, the trigger, threshold, discharge, and timing capacitor establish the output interval. Designers must verify capacitor tolerance, reset behavior, output loading, and supply regulation because timing accuracy and repeatability depend on those external and operating conditions.
Được đề xuất
Astable Oscillator and Clock Generation
The TS556IN is suitable for astable oscillation because its verified maximum astable frequency is 2.7 MHz and its architecture is compatible with the bipolar NE555. Two timer sections can create related clocks, modulation signals, or flash sequences without adding two separate IC packages. External resistors and a capacitor determine the repetition rate and duty cycle, so component tolerance and temperature coefficient directly affect timing stability. At low frequencies, capacitor leakage may become important; at high frequencies, propagation delay, output transition time, and layout parasitics must be checked. The 14-DIP footprint is especially useful for through-hole repair and prototype boards where maintainability and visual inspection are priorities.
Được đề xuất
LED Flashing and Indicator Control
The TS556IN can implement LED flashing, warning indicators, and alternating beacon controls using its two timer sections. One section can establish a repetition rate while the other derives a shifted or complementary timing interval, reducing the number of discrete timers required. The reported high output-current capability supports driving typical indicator circuitry, but the exact load, series resistance, and pulse duration must be checked against the device limits. Because this is a through-hole 14-DIP package, it is practical for industrial control panels, educational equipment, and legacy repair assemblies. Low-power CMOS operation also helps when the timer runs continuously, although the indicator driver should still be checked for injected current and switching transients.
Được đề xuất
Motor and Solenoid Control
The TS556IN is appropriate for basic motor, solenoid, and relay timing sequences where a defined on-time or repeated pulse is required. Its dual timer sections can provide an activation interval and an interlock delay, while the reported high output-current capability simplifies driving suitable transistor stages. The timer does not directly supply motor power; an appropriately rated transistor, flyback protection element, and separate load supply are still required. Designers should account for inductive voltage spikes, contactor inrush current, and the output transistor's switching behavior. The 2.7 MHz maximum astable frequency gives ample timing range, while the 14-DIP package supports serviceable through-hole control boards.
Được đề xuất
Power-Supply and Monitoring Timing
The TS556IN can provide repetitive monitoring or sampling intervals in power-supply control and supervisory systems, provided its 2 V to 16 V supply requirement is compatible with the monitored rail. One timer can initiate periodic checks while the other creates a delay before an action or acknowledgment signal. The low-power CMOS characteristic is useful in continuously operating equipment, and a source reports 100 µA typical supply current at VCC = 5 V. Designers must avoid exceeding the verified TS556IN maximum supply voltage, account for startup and reset behavior, and keep sensitive threshold inputs away from noisy switching nodes. Galvanic isolation, protection, and output-interface requirements remain outside the timer IC and must be implemented separately.
Được đề xuất
Audio and Communication Tone Generation
The TS556IN can generate low-frequency tones, audible test signals, or simple communication timing waveforms using the two astable timer sections. Its 2.7 MHz maximum astable frequency provides a wide timing range, although practical output quality near that limit depends on timer resolution and external component behavior. Low-frequency tone generation benefits from the CMOS implementation's low supply consumption, while the 14-DIP package allows straightforward prototyping in legacy audio equipment. The output stage should drive a coupling or amplification stage rather than a speaker directly in most designs. Timing-component tolerance, temperature drift, supply ripple, and unwanted coupling into nearby audio paths should be evaluated on the PCB to prevent frequency instability or audible noise.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho TS556IN — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | TLC556IN |
|---|---|---|
| Package | 14-DIP (0.300 inch, 7.62 mm) | 14-DIP (0.300 inch, 7.62 mm) |
| Brand | STMicroelectronics | Texas Instruments |
| Timer Configuration | Dual 555 Type, Timer/Oscillator | Dual 555 Type, Timer/Oscillator |
| Technology | CMOS | CMOS |
Bảo phân biệt quan trọng
- Exact STMicroelectronics dual CMOS timer identity (vsTLC556IN)
- Verified maximum astable frequency (vsTLC556IN)
- Verified TS556IN supply range (vsTLC556IN)
- Low-power CMOS implementation (vsTLC556IN)
Ghi chú thiết kế
Do not apply the TS556 family's broader voltage statement to TS556IN without checking the exact datasheet limits. The verified TS556IN listing gives 2 V to 16 V, while other TS556 family material describes operation up to +18 V. Use 16 V as the verified TS556IN ceiling, include adequate supply decoupling, and confirm reset and trigger levels at the actual VCC value.
Keep the timing capacitor and timing resistors close to the timer pins, and route threshold and trigger traces away from output and switching nodes. The TS556IN uses a 14-DIP through-hole footprint, so use adequate spacing for the 7.62 mm pin pitch and inspect solder joints after assembly. A solid ground plane and short supply paths reduce susceptibility to false triggering in industrial environments.
Calculate the timing network for the intended supply rather than assuming a fixed frequency across the complete 2 V to 16 V range. Resistance and capacitance tolerances, threshold tolerances, output delay, and the 2.7 MHz maximum astable-frequency limit all affect usable timing accuracy. Use the manufacturer equations and worst-case component tolerances, and verify that the selected capacitor technology has suitable leakage and temperature characteristics.
For high-frequency astable operation, minimize capacitance at the threshold and trigger pins and account for PCB parasitic capacitance. The 2.7 MHz figure is the maximum astable frequency, not a guaranteed operating point with every external network. Probe the actual output waveform at the load and verify rise time, duty cycle, overshoot, and ringing before increasing frequency.
Thông tin tuân thủ
The verified web data does not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements for TS556IN. No compliance claim has been inferred.
