Microchip Technology

VSC8489YJU - 10G Ethernet Transceiver | Microchip Technology

MPN: VSC8489YJU ✓ Hoạt động
196-FCBGA (15 x 15 mm) Package
MOQ: 1 |

VSC8489YJU Tóm tắt

The Microchip Technology VSC8489YJU is a 10G Ethernet transceiver interface controller in a 196-FCBGA (15 x 15 mm) surface-mount package. The device belongs to the VSC8489, VSC8490, and VSC8491 family of single-port and dual-port 10G Ethernet transceivers designed for electrical backplane and optical module host-card applications. Its stated application coverage includes SFP+ SR, LR, ER, and ZR fiber modules with EDC support.

A 10G Ethernet transceiver interface IC is a semiconductor that connects a host controller or digital processing system to high-speed copper or optical-module interfaces. It sits between the board-level digital logic and a network-facing medium, supporting Ethernet signal generation, reception, clocking, and control through an interface such as SPI. This makes it part of the broader hierarchy of network interface controllers, Ethernet interface ICs, and telecommunications semiconductors.

The VSC8489 family is designed around 10 Gigabit Ethernet data rates for backplane and optical host-card designs. Listings for the related VSC8489YJU-02 identify the device as a dual 10G reduced XAUI to XFI/SFI PHY in the same 196-FCBGA package, while VSC8489YJU-16 is identified as a single-port 10G PHY. The VSC8489YJU is therefore positioned for board designs that require a dedicated high-speed Ethernet transceiver front end rather than a general-purpose microcontroller I/O.

Microchip describes the VSC8489 family as a highly flexible solution for electrical backplane and optical module host-card applications. That positioning is significant because these systems require separate transmit and receive signal paths, low-latency data transfer, and host configuration over a serial control interface. Product descriptions for related variants also identify RoHS 3 compliance and a surface-mount implementation.

Typical uses include 10G SFP+ line-card designs, optical transceiver host cards, electrical backplane equipment, telecom aggregation systems, and high-speed data-processing infrastructure. In these applications, the transceiver provides the physical-layer interface between the host FPGA or ASIC and the network medium, while the surrounding processor handles packet processing and system management.

When planning a PCB layout, use the manufacturer's pin-description table and package drawing for all 196 ball assignments, differential routing, supply decoupling, and exposed-connection requirements. Because the package is a large fine-pitch FCBGA, high-speed signal integrity and power distribution are as important as the nominal transceiver specifications.

This page consolidates the manufacturer product-family information, distributor package and interface details, practical placement guidance, and a comparison of documented VSC8489 ordering variants. It is intended to accelerate initial design review while keeping pin-level implementation decisions tied to the official Microchip documentation.

Bộ thay thế dễ dàng lắp đặt cho VSC8489YJU — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

VSC8489YJU-02

✅ Drop-In
📦 196-FCBGA (15 x 15 mm)
Dual 10G reduced-XAUI-to-XFI/SFI PHY configuration versus the base ordering variant; package dimensions are unchanged

📋 Tham chiếu thay thế (không có trong danh mục)

VSC8489YJU-01

✅ Drop-In
📦 196-FCBGA (15 x 15 mm)
196-BGA ordering variant with configuration-specific lane and interface details; ball count is unchanged

📋 Tham chiếu thay thế (không có trong danh mục)

VSC8489YJU-16

✅ Drop-In
📦 196-FCBGA (15 x 15 mm)
Single-port 10G PHY versus the dual reduced-XAUI configuration documented for the -02 variant; package format is unchanged

📋 Tham chiếu thay thế (không có trong danh mục)

VSC8489YJU Thông số kỹ thuật

Product Type 10G Ethernet transceiver interface controller
Nominal Data Rate 10 Gb/s
Port Configuration Single-port and dual-port family options
Control Interface SPI
Hộp 196-FCBGA (15 x 15 mm)
Kiểu lắp đặt Surface Mount
Application Area Telecommunications
Target Applications Electrical backplane and optical module host cards
Supported Optical Module Classes SFP+ SR, LR, ER, and ZR fiber modules
Optical Module Feature Support EDC support
Related VSC8489YJU-02 Configuration Dual 10G (R)-XAUI to XFI/SFI PHY
Related VSC8489YJU-16 Configuration Single-port 10G PHY
Trạng thái RoHS RoHS 3 compliant

Hướng dẫn cấu hình chân VSC8489YJU 196-fcbga (15 x 15 mm)

Cấu hình chân cho VSC8489YJU (196-fcbga (15 x 15 mm) gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 196-fcbga (15 x 15 mm) cho VSC8489YJU

Không có dữ liệu chân cụ thể sẵn có cho VSC8489YJU.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

VSC8489YJU phù hợp cho 6 Áp dụngs: 10G SFP+ Optical Module Host Card, Electrical Backplane 10G Link, Telecom Aggregation and Line Cards, FPGA-Based 10G Data Acquisition, SFP+ Network Adapter Card, Optical Module Test and Validation Platform.

🌐

10G SFP+ Optical Module Host Card

The VSC8489YJU fits a 10G SFP+ host card where an FPGA or ASIC requires a dedicated Ethernet transceiver interface. Its documented family supports SFP+ SR, LR, ER, and ZR module classes, giving the board a common transceiver platform for short-reach multimode and longer-distance single-mode modules. The 196-FCBGA package keeps the high-speed interface concentrated in a compact area, while SPI supports board-level configuration from a management controller. Layout should separate the module-side differential paths from the SPI traces and verify the exact lane mapping against the manufacturer pin table.

🖥️

Electrical Backplane 10G Link

The VSC8489YJU is suited to electrical backplane equipment that carries 10 Gb/s between line cards or processing modules. A dedicated transceiver interface allows the host ASIC to operate at the Ethernet rate without building the high-speed physical layer directly into general-purpose logic. The package provides a compact footprint for dense backplane designs, but successful deployment depends on controlled differential routing, continuous reference planes, and a clock architecture that satisfies the device's transceiver requirements. Use the official Microchip reference-layout guidance when defining layer transitions and via geometry.

🏭

Telecom Aggregation and Line Cards

The VSC8489YJU can support telecom aggregation, line-card, and switching equipment that requires a 10G network-facing transceiver. Its SFP+ module orientation makes it useful where field-serviceable optical interfaces are preferred over fixed fiber attachments, while the family coverage across SR, LR, ER, and ZR modules simplifies platform planning. The SPI management path allows a supervisory controller to configure the transceiver without sharing the high-speed datapath. Power budgeting, thermal margins, and module-specific electrical limits must be reviewed against the official device documentation before release.

📡

FPGA-Based 10G Data Acquisition

The VSC8489YJU is appropriate for FPGA-based acquisition and processing platforms that need to move 10 Gb/s Ethernet data between a network and local logic. The transceiver interface offloads the Ethernet-facing physical layer from the FPGA, reducing the amount of high-speed routing that must terminate directly at the processor. Its compact FCBGA footprint also leaves board area for DSP or memory resources. In practice, the FPGA must supply the required reference clock and configuration sequencing, and the board should include the SPI management path plus test points for bring-up and signal-integrity validation.

💡

SFP+ Network Adapter Card

The VSC8489YJU can be used in a dedicated SFP+ network adapter card where modular optical connectivity is required. The family's support for several SFP+ reach classes allows one card design to address short-range multimode or longer single-mode links, subject to the optical module's own specifications. The 15 x 15 mm FCBGA package supports compact card construction, and the SPI interface permits a separate management controller to read status and configure operating modes. Verify the host interface, lane polarity, reference-clock source, and module-loss budget for each adapter configuration.

🔧

Optical Module Test and Validation Platform

The VSC8489YJU is useful in a test platform that validates SFP+ modules and Ethernet links under realistic 10G signaling conditions. A controlled host interface allows engineers to exercise configuration, status reporting, error behavior, and EDC-supported operation through the transceiver rather than relying only on optical-loopback tests. The SPI interface simplifies automated control from a test processor. For repeatable measurements, the platform should provide clean references, controllable losses, independent monitoring, and the thermal conditions expected in the deployed system, while keeping test-access routing from disturbing the high-speed pairs.

What is the Microchip VSC8489YJU used for?
The Microchip VSC8489YJU is a 10G Ethernet transceiver interface controller used in electrical backplane and optical module host-card equipment. It is packaged in a 196-FCBGA measuring 15 x 15 mm and connects Ethernet-facing hardware to a host controller through a dedicated high-speed transceiver interface. According to the Microchip VSC8489 product page, the related family is intended for SFP+ SR, LR, ER, and ZR fiber applications with EDC support.
What is the difference between VSC8489YJU and VSC8489YJU-02?
The VSC8489YJU and VSC8489YJU-02 are ordering variants within the same Microchip 10G Ethernet transceiver family. Distributor documentation identifies VSC8489YJU-02 as a dual 10G reduced XAUI to XFI/SFI PHY in a 196-FCBGA package. The suffix therefore identifies a specific device configuration, while both parts share the high-speed Ethernet transceiver positioning and the same package family.
Is VSC8489YJU a single-port or dual-port 10G PHY?
The VSC8489YJU is identified as a 10G Ethernet interface controller within a family that includes single-port and dual-port configurations. The related VSC8489YJU-16 is specifically described as a single-port 10G PHY, while VSC8489YJU-02 is described as a dual 10G reduced XAUI to XFI/SFI PHY. Confirm the exact lane configuration against the ordering-code table in the Microchip documentation before schematic capture.
Where can I download the VSC8489YJU datasheet and pinout?
The primary starting point for the VSC8489YJU datasheet and pinout is the Microchip VSC8489 product page at https://www.microchip.com/en-us/product/VSC8489. Use the package drawing and pin-description table there to assign all 196 FCBGA balls, differential pairs, supply rails, and ground connections. The device's 196-FCBGA outline is 15 x 15 mm, so land-pattern and escape-routing work must follow the official package data rather than a generic BGA assumption.
Which VSC8489 ordering variants share the 196-FCBGA package?
VSC8489YJU-02 is explicitly listed in a 196-FCBGA (15 x 15 mm) package, and the VSC8489YJU-01 ordering variant is listed as a 196-BGA Ethernet interface controller. These variants are the closest documented members of the same ordering family. Package fit alone does not confirm a drop-in replacement; verify lane count, interface direction, firmware configuration, and pin-ball assignments before substitution.
What can replace the Microchip VSC8489YJU?
The closest documented replacements for the VSC8489YJU are the Microchip VSC8489YJU-01, VSC8489YJU-02, and VSC8489YJU-16 ordering variants because they belong to the same 10G Ethernet transceiver family. The -02 uses a dual reduced-XAUI-to-XFI/SFI configuration, while the -16 is identified as a single-port 10G PHY. Treat these as configuration-dependent alternatives and validate the exact pin and lane configuration with the manufacturer.
When should I choose VSC8489YJU-02 instead of the base VSC8489YJU?
Choose VSC8489YJU-02 when the board requires the documented dual 10G reduced-XAUI-to-XFI/SFI configuration rather than the base ordering variant. It shares the 196-FCBGA (15 x 15 mm) package format used by the family and is therefore the most directly comparable member. A replacement decision must still account for interface direction, lane count, host-clock architecture, register configuration, and exact ball assignments.
Is VSC8489YJU suitable for SFP+ optical modules?
Yes, the VSC8489 family is specifically positioned for optical module host-card applications. Microchip lists support for SFP+ SR, LR, ER, and ZR fiber modules, including EDC support for the family. The host card still requires the correct module cage, optical drivers, receive path, reference clock, and power management, so module compatibility must be verified at the complete interface level.
How is the VSC8489YJU configured or controlled?
Distributor documentation identifies the SPI interface for the VSC8489YJU family, providing a serial host-control path for configuration and device management. SPI simplifies access from a low-speed management processor while the 10G datapath operates independently. Pin assignments, supported register addresses, and configuration timing should be taken from the official Microchip datasheet before the management firmware is written.
What are the key specifications engineers should know about VSC8489YJU?
The essential VSC8489YJU facts are a 10 Gb/s Ethernet interface role, a 196-FCBGA package measuring 15 x 15 mm, surface-mount construction, and SPI configuration access. It belongs to the Microchip family aimed at electrical backplane and optical host-card applications, including SFP+ SR, LR, ER, and ZR module use cases with EDC support. Detailed electrical ratings, power consumption, and temperature limits must be confirmed in the official datasheet.
How should a 196-FCBGA 10G Ethernet transceiver be laid out on a PCB?
Begin the layout with the official Microchip package drawing and pin-description table for all 196 balls. Place power and ground connections directly beneath the device where the package permits, use short return paths, and route high-speed differential pairs as impedance-controlled transmission lines with continuous reference planes. Keep the SPI management interface away from sensitive differential nets, and validate the escape routing and layer-transition geometry with the manufacturer's recommendations and signal-integrity simulation.
Where can I buy the VSC8489YJU online?
Use the Request a Quote form on this XAIPART product page to request current availability, lead time, and a quotation for the VSC8489YJU. Because these values can change by quantity and market conditions, submit the exact MPN and required quantity with your request. Microchip's VSC8489 product page remains the authoritative source for technical documentation and product revisions.
What is the price of the VSC8489YJU?
Current pricing for the VSC8489YJU is available through the Request a Quote form on this page, where the quantity and configuration can be included in the request. Marketplace prices may vary with quantity, sourcing channel, and availability, so they should not be treated as a fixed quotation. Use the form for a current commercial response tied to the exact Microchip ordering code.
What is the lead time for the Microchip VSC8489YJU?
Request the current lead time through the Request a Quote form on this page. Lead time depends on the exact ordering suffix, assembly requirements, quantity, and current manufacturer inventory. The base VSC8489YJU should be quoted separately from the -01, -02, and -16 variants because each suffix represents a distinct device configuration rather than a simple packing code.
Is the VSC8489YJU currently in stock?
Check current stock and available quantity through the Request a Quote form on this page. The form allows you to state the required quantity and receive an availability response for the exact VSC8489YJU ordering code. Because stock levels change rapidly and the manufacturer offers multiple suffix variants, avoid assuming that availability of one family member confirms availability of another.
Is there a Microchip equivalent to the VSC8489YJU from another manufacturer?
No cross-manufacturer drop-in equivalent is documented for the VSC8489YJU in the available component records. The closest documented choices are Microchip's own VSC8489YJU-01, VSC8489YJU-02, and VSC8489YJU-16 variants. A competitor device may provide a similar 10G Ethernet function, but it should be treated as a redesign candidate unless the manufacturer explicitly confirms the same 196-ball pinout, lane configuration, electrical limits, and host interface.

Dữ liệu tham khảo kỹ thuật cho VSC8489YJU — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the VSC8489YJU when designing a 10G Ethernet host card or backplane interface around Microchip's VSC8489 transceiver family and you have confirmed that the base ordering code matches the required lane count, interface direction, and ball map. Select VSC8489YJU-02 when the design specifically requires the documented dual 10G reduced-XAUI-to-XFI/SFI configuration. Select VSC8489YJU-16 when a single-port 10G PHY is sufficient. Use VSC8489YJU-01 only after checking its ordering-code configuration against the base part. A shared 196-ball package does not by itself prove electrical or firmware equivalence, so no cross-manufacturer substitution should be made without a manufacturer-confirmed pinout and functional match. In all cases, the 10G differential routing, clocking, power distribution, and thermal design deserve review before the PCB is released.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này VSC8489YJU-02 VSC8489YJU-01 VSC8489YJU-16
Package 196-FCBGA (15 x 15 mm) 196-FCBGA (15 x 15 mm) 196-BGA 196-FCBGA (15 x 15 mm)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Nominal Data Rate 10 Gb/s Dual 10G 10G Ethernet interface controller Single-port 10G
Target Application Electrical backplane and optical module host cards Telecom Ethernet interface 10G Ethernet interface controller 10G Ethernet PHY
Mounting Type Surface Mount Surface Mount Surface Mount Surface Mount

Bảo phân biệt quan trọng

  • Single documented family covers both electrical backplane and optical host-card use cases (vsVSC8489YJU-16)
  • Explicit dual reduced-XAUI-to-XFI/SFI configuration is available (vsVSC8489YJU-01)
  • Package reuse supports board-platform consolidation (vsVSC8489YJU-02)
  • SPI host control simplifies system management (vsVSC8489YJU-16)

Ghi chú thiết kế

Treat the VSC8489YJU as a high-speed, fine-pitch FCBGA design rather than a generic digital IC. Use the official Microchip land pattern and pin table for all 196 balls, and maintain continuous reference planes beneath the device where the package permits. Place local power-decoupling structures at the package perimeter and follow the manufacturer's via-in-pad or micro-via guidance. Because the device supports 10 Gb/s operation, escape-routing geometry, reference-plane transitions, and via stub lengths should be reviewed during stack-up definition.

Route every supported high-speed differential interface with a controlled-impedance transmission-line structure and a continuous return path beneath the pair. Do not split a reference plane beneath a differential net, and avoid vias where a larger layer transition can create unnecessary impedance discontinuities. The SPI management bus should be routed away from the transceiver pairs and protected from adjacent high-speed crosstalk. Validate the complete channel with the manufacturer's reference layout and an IBIS or equivalent signal-integrity model when one is available.

Create the power tree around the transceiver's rated rails rather than assuming that an adjacent host-supply rail is suitable. Budget startup current, steady-state dissipation, and adjacent converter tolerance across the full expected operating range. Keep the reference-clock and sensitive supply paths quiet, and place bulk energy storage near the package while retaining the required low-inductance local decoupling. Confirm rail sequencing, maximum supply voltage, and shutdown behavior against the official Microchip datasheet before schematic release.

Do not treat the -01, -02, -16, and base VSC8489YJU order codes as interchangeable packaging labels. Their documented lane counts and PHY configurations differ, and a shared 196-ball package does not guarantee identical signal functions. Before substitution, compare the complete ball map, power rails, reference clocks, management pins, lane directions, and register configuration. Also avoid relying on generic cross-reference results for this high-pin-count device; require manufacturer confirmation or a complete engineering review.

Thông tin tuân thủ

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

RoHS 3 compliance is stated for the VSC8489YJU-02 family listing. Other environmental and material compliance declarations require confirmation from the manufacturer.

Dữ liệu được xác minh vào: 2026-11-11 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

VSC8489YJU datasheet VSC8489YJU pinout VSC8489YJU datasheet pdf VSC8489YJU 196 FCBGA VSC8489YJU equivalent VSC8489YJU replacement VSC8489YJU cross reference VSC8489YJU vs VSC8489YJU-02 Microchip VSC8489YJU VSC8489YJU price VSC8489YJU stock VSC8489 SFP+ host card PHY VSC8489YJU schematic VSC8489YJU reference layout

Các bộ phận và thuật ngữ liên quan

Microchip Technology VSC8489YJU VSC8489YJU-01 VSC8489YJU-02 VSC8489YJU-16 VSC8489 VSC8490 VSC8491 10G Ethernet transceiver Ethernet interface controller 10G PHY telecommunications IC interface IC network interface controller semiconductor 196-FCBGA FCBGA package surface mount SPI SFP+ SFP+ SR SFP+ LR SFP+ ER SFP+ ZR EDC electrical backplane optical module host card reduced XAUI XFI SFI RoHS 3
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ