Microchip Technology

VSC8522XJQ-04 - 12-Port Gigabit Ethernet PHY | Microchip

MPN: VSC8522XJQ-04 ✗ Cuối đời
302-pin TQFP, 24 x 24 mm Package 10/100/1000BASE-T Gigabit Ethernet Speed
MOQ: 1 |

VSC8522XJQ-04 Tóm tắt

The Microchip Technology VSC8522XJQ-04 is a 12-port Gigabit Ethernet physical-layer transceiver integrated with a QSGMII MAC interface, fabricated using 65 nm technology and housed in a 302-pin TQFP package measuring 24 x 24 mm. The industrial-temperature -04 configuration is intended for multichannel network equipment requiring one package to support twelve copper Ethernet PHYs.

A Gigabit Ethernet PHY is the physical-layer component that converts digital network data into electrical signaling for copper cables while recovering data from received signals. Within an Ethernet system, the PHY sits between the MAC or switching fabric and the magnetics-equipped network ports. A multiport PHY consolidates twelve such channels into one high-integration device, reducing component count and simplifying control when compared with separate single-port PHY implementations.

The VSC8522-02 and VSC8522-04 family members contain twelve integrated Gigabit Ethernet PHYs using a power-efficient voltage-mode design. Their QSGMII interface provides the high-speed parallel link commonly used to connect a switching ASIC or line-card controller to a group of physical-layer channels. The 65 nm implementation is identified by Microchip as a cost- and power-focused process for integrated Ethernet access devices.

The -04 suffix identifies the industrial-temperature member of the family. The Microsemi existing-parts listing identifies the package as a 302-pin, 24 x 24 mm TQFP with lead-free second-level interconnect. Its large leaded package provides numerous mixed-signal, digital, power, and ground connections needed by twelve independent Ethernet channels, but it also requires careful high-speed layout and adequate thermal planning.

Typical uses include multichannel Ethernet line cards, access switches, industrial Ethernet aggregation, telecom access equipment, and other systems that need many copper ports without using twelve separate PHY packages. Because each port also requires suitable magnetic or filtering components, signal-integrity work should include controlled-impedance routing, solid return paths, isolation from switching circuitry, and compliance-oriented separation between transmit and receive paths.

Designers should preserve the datasheet-recommended power and decoupling network, place bulk and high-frequency capacitors near their intended supply pins, and route each differential pair as a tightly coupled pair with minimal stubs. The 302-pin footprint requires exact land-pattern and pin-definition verification before layout; use the manufacturer pin-description table rather than inferring connectivity from the package drawing.

This page summarizes the architecture, package constraints, sourcing considerations, and engineering trade-offs of the VSC8522XJQ-04. It also distinguishes a true pin-compatible family option from unrelated single-port Ethernet controllers, helping engineers evaluate whether a multichannel PHY architecture remains appropriate for a new design or a legacy board refresh.

Bộ thay thế dễ dàng lắp đặt cho VSC8522XJQ-04 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với VSC8522XJQ-04 (cùng hình factor và footprint) — khác nhau ở Product Type.

Microchip Technology
Product Type: 12-port Gigabit Ethernet copper PHY with QSGMII
So sánh với VSC8522XJQ-04 →

Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.

Yêu cầu các bộ thay thế

VSC8522XJQ-04 Thông số kỹ thuật

Product Type 12-port Gigabit Ethernet PHY with QSGMII MAC interface
Number of Integrated PHYs 12 PHYs
Ethernet Speed 10/100/1000BASE-T Gigabit Ethernet
Host Interface QSGMII
Process Technology 65 nm
PHY Design Power-efficient voltage-mode design
Hộp 302-pin TQFP, 24 x 24 mm
Lead-Free Construction Lead-free second-level interconnect
Temperature Grade Industrial temperature
Kiểu lắp đặt Surface mount
Ethernet Ports per Package 12 ports

Hướng dẫn cấu hình chân VSC8522XJQ-04 12 ports

Cấu hình chân cho VSC8522XJQ-04 (12 ports gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 12 ports cho VSC8522XJQ-04

Không có dữ liệu chân cụ thể sẵn có cho VSC8522XJQ-04.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

VSC8522XJQ-04 phù hợp cho 6 Áp dụngs: Industrial Ethernet Aggregation, Telecom Access Line Card, Multichannel Network Appliance, Gigabit Ethernet Access Switch, Industrial Camera Gateway, Ethernet-to-Optical Gateway.

🏭

Industrial Ethernet Aggregation

The VSC8522XJQ-04 fits a 12-port copper aggregation board because it integrates 12 Gigabit Ethernet PHYs behind one QSGMII interface, allowing a central switching ASIC to manage all channels. The 65 nm, voltage-mode implementation supports the manufacturer’s stated power-efficient architecture, while the industrial-temperature -04 designation suits equipment expected to operate beyond consumer environments. The design still requires validated magnetics, port filtering, controlled-impedance routing, and careful separation of Ethernet signals from noisy power stages. Its 302-pin TQFP footprint is large and demanding, so this architecture is most attractive when twelve ports can be deployed on one board and the reduced PHY-package count offsets that routing complexity.

🌐

Telecom Access Line Card

A telecom access line card can use the VSC8522XJQ-04 to place 12 copper Gigabit Ethernet channels in one 24 x 24 mm package and connect them through QSGMII to the line-card controller. Concentrating the PHYs reduces the number of discrete transceiver packages, potentially simplifying enclosure space and shared-controller arrangement. In return, the board must support many differential pairs, numerous supply connections, and a high pin count, making power-plane continuity and return-path integrity critical. The industrial-temperature -04 configuration is relevant to access equipment operating in uncontrolled environments, subject to the manufacturer’s complete electrical and thermal ratings.

🖥️

Multichannel Network Appliance

The VSC8522XJQ-04 is appropriate for network appliances that need many wired Gigabit Ethernet interfaces without provisioning a separate PHY package for every port. Twelve integrated PHYs share a QSGMII uplink to the appliance’s switching or packet-processing silicon, which can simplify board partitioning and centralize configuration through the device management interface. The trade-off is that this highly integrated device has a 302-lead package and requires disciplined layout to prevent crosstalk, reference-clock degradation, and supply-noise coupling. Mechanical design must also provide adequate copper area and airflow because the leaded TQFP carries the electrical and thermal burden of a multichannel Ethernet front end.

🔧

Gigabit Ethernet Access Switch

For a 12-port Gigabit Ethernet access switch, the VSC8522XJQ-04 directly matches the copper-port count while exposing the group of channels through QSGMII for a switching ASIC. This arrangement allows line-card electronics to concentrate on forwarding, classification, and management while the VSC8522 handles physical signaling for all ports. The voltage-mode, 65 nm PHY architecture is specifically positioned by Microchip for efficient multichannel deployments. To realize the expected performance, the board must use the manufacturer’s recommended reference network, verify magnetics selection, maintain controlled differential-pair geometry, and provide low-impedance power distribution across the unusually large package.

🎥

Industrial Camera Gateway

The VSC8522XJQ-04 can support an industrial camera or machine-vision gateway requiring twelve Gigabit Ethernet endpoints. Consolidating the physical layers allows the gateway’s main processor or network ASIC to handle traffic through QSGMII while leaving copper signaling to the dedicated PHY device. This is useful in production cells where multiple cameras, sensors, and service equipment may share a common network enclosure. Industrial suitability must still be verified against ambient-temperature, shock, vibration, and availability requirements. Layout should emphasize isolation between adjacent channels, uninterrupted ground references, controlled impedance, and filtering that prevents Ethernet transceiver energy from coupling into sensitive sensor circuitry.

⚡

Ethernet-to-Optical Gateway

An Ethernet-to-optical gateway can pair the VSC8522XJQ-04’s twelve copper PHYs with upstream optical transport electronics, creating a high-density copper-to-fiber bridge. The QSGMII interface provides a practical partition between the multichannel physical layer and the gateway’s switching or packet-processing block, while the 65 nm voltage-mode PHY architecture supports power-efficient operation. The gateway must still meet EMC, isolation, and environmental requirements for its installation environment. Practical implementation should follow the manufacturer reference circuit closely, validate magnetics and surge protection, keep protection components away from high-speed differential traces, and provide multiple low-impedance supply connections rather than routing sensitive rails through long narrow paths.

What is the VSC8522XJQ-04?
The VSC8522XJQ-04 is a 12-port Gigabit Ethernet PHY with a QSGMII MAC interface. According to the Microchip VSC8522 product page, the device combines twelve Gigabit Ethernet PHYs in one package and uses a power-efficient voltage-mode implementation fabricated on 65 nm technology. It is packaged as a 302-pin, 24 x 24 mm TQFP for industrial-temperature network equipment.
How many Gigabit Ethernet PHYs are integrated in the VSC8522XJQ-04?
The VSC8522XJQ-04 integrates 12 Gigabit Ethernet PHYs in a single package. The Microchip VSC8522 product page states that both the VSC8522-02 and VSC8522-04 devices contain the twelve PHYs, while the manufacturer datasheet describes a shared QSGMII connection to the surrounding switching or line-card electronics. This integration is intended to simplify multichannel copper-Ethernet designs.
Where can I download the VSC8522XJQ-04 datasheet PDF?
The VSC8522XJQ-04 datasheet PDF is available through the Microchip VSC8522 family documentation linked from the manufacturer product page and through the Mouser-hosted Microsemi VSC8522 document. Use the pin-description table, electrical characteristics, reference circuit, and layout guidance in that document before assigning signals or releasing a PCB layout. The exact package is a 302-pin TQFP measuring 24 x 24 mm.
Where can I find the VSC8522XJQ-04 pinout?
The definitive VSC8522XJQ-04 pinout is in the pin-description table of the Microsemi VSC8522 manufacturer datasheet. The component uses a 302-pin, 24 x 24 mm TQFP, so a generic 100-pin TQFP drawing is not a valid substitute. Use the manufacturer document to map every power, ground, QSGMII, management, and Ethernet signal before schematic capture and PCB routing.
What technology is used in the VSC8522XJQ-04?
The VSC8522XJQ-04 uses 65 nm process technology. According to the Microchip VSC8522 product page, this process supports a cost-efficient and low-power implementation of the twelve-port Gigabit Ethernet PHY device. The process statement applies to the VSC8522-02 and VSC8522-04 family members described on the manufacturer page.
Is the VSC8522XJQ-04 suitable for industrial temperature applications?
Yes, the -04 configuration is identified as the industrial-temperature member of the VSC8522 family. The exact minimum and maximum junction or ambient-temperature ratings must be taken from the electrical-characteristics table in the manufacturer datasheet. Industrial qualification should be assessed against the complete system requirements rather than the device suffix alone.
Where can I buy the VSC8522XJQ-04?
Use the Request a Quote form on this page to ask about VSC8522XJQ-04 availability, current lifecycle status, minimum order quantity, and delivery requirements. The manufacturer’s existing-parts information indicates a legacy component, so allocation and lead time should be confirmed for the exact 302-pin industrial-temperature ordering code rather than assumed from another VSC8522 suffix.
What is the current price and lead time for the VSC8522XJQ-04?
Current commercial terms for the VSC8522XJQ-04 should be requested through the Request a Quote form on this page. Because this is a specialized 302-pin legacy Ethernet device, quantity availability and lead time may vary with market conditions and exact packaging needs. Confirm the MPN, quantity, and target delivery date in the quotation response.
Is the VSC8522XJQ-04 in stock?
Stock should be confirmed through the Request a Quote form on this page for the exact VSC8522XJQ-04 ordering code. The device is listed through legacy-part channels, but a distributor search result alone does not establish guaranteed inventory. Provide the required quantity, date code preference, and traceability requirements when requesting a quotation.
What is the difference between VSC8522XJQ-04 and VSC8522-02?
Both devices are members of the 12-port Gigabit Ethernet PHY family and share the 65 nm voltage-mode architecture described by Microchip. Their exact configuration and pin-function differences must be checked in the VSC8522 datasheet before treating one as a substitute. The -04 ordering code is identified as the industrial-temperature member, while the complete -02 versus -04 feature delta is not stated in the available product summary.
When should I choose the VSC8522XJQ-04 instead of a single-port Ethernet PHY?
Choose the VSC8522XJQ-04 when a design needs multiple copper Gigabit Ethernet ports and can justify one large 302-pin PHY package. A single-port PHY can simplify low-channel-count boards and reduce routing complexity, but the VSC8522 family consolidates 12 PHYs behind QSGMII, reducing the number of separate PHY packages while increasing package, power-supply, and signal-integrity complexity.
Is the VSC8522XJQ-04 suitable for a 12-port industrial Ethernet switch?
The VSC8522XJQ-04 is architecturally suited to a 12-port copper Gigabit Ethernet access or industrial aggregation design because it provides twelve PHYs and a QSGMII interface in one device. Final suitability depends on the required operating temperature, power budget, port certification, magnetics, thermal conditions, and whether the system needs the exact -04 configuration. Those details must be validated against the manufacturer datasheet.
What can replace the VSC8522XJQ-04?
The closest documented replacement is a like-for-like VSC8522 family ordering option with the same 302-pin TQFP footprint and 12-port QSGMII architecture, but the exact suffix-level compatibility must be confirmed in the manufacturer pin table. Single-port Ethernet PHYs and unrelated 10G copper PHYs are not drop-in replacements because their channel count, package, interface, and electrical requirements differ.
Is there a Microchip drop-in replacement for the VSC8522XJQ-04?
No fully documented drop-in replacement is established by the available manufacturer and cross-reference information. A same-family VSC8522 option may provide the closest path, but it should not be called drop-in until its 302-pin pinout, QSGMII configuration, power rails, management interface, and firmware requirements match. Use Microchip’s cross-reference search and the manufacturer datasheet for an engineering-level match.
What are the key specifications of the VSC8522XJQ-04 that engineers should know?
The principal specifications are 12 integrated Gigabit Ethernet PHYs, a QSGMII MAC interface, 65 nm fabrication, a 302-pin TQFP package measuring 24 x 24 mm, and an industrial-temperature -04 designation. The device also uses a power-efficient voltage-mode PHY design and a lead-free second-level interconnect. Exact supply voltages, power figures, temperature limits, and clock requirements require the manufacturer datasheet.

Dữ liệu tham khảo kỹ thuật cho VSC8522XJQ-04 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

The VSC8522XJQ-04 is most appropriate when a board needs 12 copper Gigabit Ethernet ports and can support a specialized 302-pin TQFP layout. It integrates all 12 PHYs behind QSGMII and uses a 65 nm voltage-mode architecture, reducing PHY-package count while centralizing control through the surrounding switch or network controller. It is less attractive for low-port-count products, where a single-port PHY will usually simplify the schematic, reduce routing congestion, and lower thermal and procurement complexity. For an existing VSC8522-based design, a like-for-like family ordering option may be the only practical replacement path; its pinout, clock, power, management, and firmware compatibility must be checked before installation. Cross-brand single-port PHYs and unrelated multichannel devices are not drop-in choices, and no documented cross-brand equivalent is identified. For new multiport products, also consider whether a more current Ethernet switching solution offers better lifecycle assurance, thermal performance, or vendor support.

Ghi chú thiết kế

Use the exact 302-pin TQFP land pattern and manufacturer pin-description table when laying out the VSC8522XJQ-04. A generic 100-pin TQFP footprint is mechanically and electrically unsuitable. Place each required bypass capacitor close to its supply pins, preserve the recommended ground connections, and route QSGMII and differential Ethernet nets as controlled-impedance signals. Because there are 302 external connections, verify every pin assignment mechanically and electrically rather than relying on visual inspection alone.

Treat all twelve copper channels as simultaneous high-speed differential pairs. Keep each TX and RX pair tightly coupled with a continuous reference plane, avoid stubs and plane splits, and maintain the geometry specified by the manufacturer reference design. Provide an uninterrupted ground-return path beneath the package and separate switching regulators, magnetics, and protection components from sensitive PHY nets. Validate the final layout for crosstalk and channel-margin behavior across all supported traffic patterns.

The 302-pin TQFP integrates twelve PHYs and associated digital logic into a 24 x 24 mm package, so thermal design cannot be based only on average board temperature. Use the manufacturer’s thermal information and application circuit to select copper area, airflow, and any external heat-spreading arrangement. Check junction-temperature rise at the highest expected channel activity and ambient temperature. Lead length and solder-joint quality also affect thermal performance, so production processes should maintain uniform wetting and adequate solder fillets.

Implement the manufacturer-recommended supply network rather than inferring decoupling from generic Ethernet guidance. Separate sensitive analog or PHY supply paths from high-current switching nodes where the reference design allows, terminate unused supply pins as directed, and check startup sequencing, voltage tolerances, and current limits against the electrical-characteristics table. The available product summary does not state supply values or power consumption, so those parameters must be obtained from the manufacturer datasheet before sizing regulators and bulk capacitance.

Do not substitute a single-port PHY, a 10G copper PHY, or an unrelated QSGMII switch controller without treating the change as a redesign. Channel count, package pins, reference clock, management interface, firmware expectations, and port magnics may differ even when the host interface name is similar. For a legacy-board replacement, compare every manufacturer pin name and power rail, preserve the original QSGMII timing constraints, and verify software driver compatibility before approving the substitution.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Yes
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The Microsemi existing-parts listing identifies the VSC8522 package as having lead-free second-level interconnect. RoHS, REACH, halogen-free, and conflict-minerals status are not established by the available product information.

Dữ liệu được xác minh vào: 2026-11-16 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

VSC8522XJQ-04 datasheet VSC8522XJQ-04 datasheet pdf VSC8522XJQ-04 pinout VSC8522XJQ-04 302 pin VSC8522XJQ-04 QSGMII VSC8522XJQ-04 equivalent VSC8522XJQ-04 replacement VSC8522XJQ-04 price VSC8522XJQ-04 stock Microchip VSC8522XJQ-04 VSC8522XJQ-04 Ethernet switch VSC8522XJQ-04 industrial

Các bộ phận và thuật ngữ liên quan

Microchip Technology Microsemi VSC8522XJQ-04 VSC8522-04 VSC8522-02 Gigabit Ethernet PHY Ethernet physical layer QSGMII QSGMII MAC 12-port Ethernet Copper Ethernet 10/100/1000BASE-T 65 nm semiconductor process Voltage-mode PHY 302-pin TQFP 24 x 24 mm TQFP Surface-mount package Lead-free second-level interconnect Industrial temperature Ethernet switch Telecom access equipment Industrial Ethernet Network switch ASIC Ethernet magnetics Differential-pair routing
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ