W78E058DPG - 8-Bit 40MHz 32KB Flash MCU | Nuvoton | PLCC-44
MPN: W78E058DPG ✗ Cuối đờiW78E058DPG Tóm tắt
An 8052-compatible MCU is an embedded microcontroller built around the established 8-bit 8051/8052 instruction-set architecture. Within the product hierarchy, the W78E058D belongs to the Nuvoton 8-bit 8051 MCU family and combines a 6T/12T configurable core with Flash program memory. This architecture is appropriate for compact control systems that need deterministic control logic, moderate processing capacity, and broad peripheral integration without the cost or complexity of a higher-bit MCU.
The principal device parameters include an 8-bit architecture, 40 MHz operating speed, 32 KB Flash memory, 512 bytes of RAM, 36 I/O pins, and a 44-pin PLCC package. According to Nuvoton product information, the W78E058D family is configurable and pin-compatible with traditional 12T 8051 devices. Its operating range of 2.4 V to 5.5 V also supports both lower-voltage and legacy 5 V equipment designs.
The W78E058D family combines Flash program memory with an 8052-compatible core and is positioned for embedded controls including security and alarm equipment, barcode readers, KVM equipment, key phones, user interfaces, and industrial control products. The 36 available I/O pins provide substantial peripheral connectivity for sensors, displays, communication interfaces, and discrete control signals while retaining the familiar 8051 software ecosystem.
For new designs, NRND status is the primary selection consideration. An existing product using the W78E058DPG can generally be maintained when its electrical, memory, timing, and software requirements remain unchanged, but designers should evaluate an active Nuvoton MCU or another currently supported platform when beginning a new production program. A firmware migration is not necessarily required for an identical device, although peripheral changes, memory layout, timing, and package differences require careful review.
When laying out a 44-pin PLCC design, preserve the component's specified pin arrangement and provide suitable bypass capacitance and signal-integrity routing for external clock, reset, and I/O signals. Socketed PLCC assemblies may be convenient for prototypes or service programs, whereas exposed-pad leaded PLCC packages generally require inspection for solder-joint reliability after rework. The manufacturer's datasheet remains the controlling reference for pin names, electrical limits, and programming details.
This product page consolidates verified manufacturer and distributor information, operating limits, package data, pricing availability status, and a documented drop-in comparison for the verified W78E058B40PL candidate. Unlike a raw distributor listing, it also distinguishes a confirmed pin-compatible replacement from unverified catalog recommendations and identifies where additional engineering validation is still required.
Bộ thay thế dễ dàng lắp đặt cho W78E058DPG — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với W78E058DPG (cùng hình factor và footprint) — khác nhau ở Core Architecture, Mounting Type, Package.
W78E058B40PL
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
W78E058DPG Tỷ lệ tối đa & tính chất điện
| Microcontroller Type | 8-bit 8052-compatible W78 microcontroller |
| Maximum CPU Frequency | 40 MHz |
| Program Memory Size | 32 KB (32K x 8) Flash |
| RAM Size | 512 x 8 bits (512 bytes) |
| Number of I/O Pins | 36 pins |
| Hộp | 44-pin PLCC |
| Điện áp cung cấp hoạt động | 2.4 V to 5.5 V |
| Nhiệt độ hoạt động | -40°C to +85°C |
| Core Architecture | 8052-compatible, configurable 6T/12T core |
| Instruction Set Architecture | 8-bit CISC |
| Kiểu lắp đặt | Surface-mount PLCC |
| Lead-Free Status | Pb-free |
| Trạng thái vòng đời | Not Recommended for New Designs (NRND) |
Hướng dẫn cấu hình chân W78E058DPG 44-pin plcc
Cấu hình chân cho W78E058DPG (44-pin plcc gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho W78E058DPG.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
W78E058DPG phù hợp cho 6 Áp dụngs: Security and Alarm Control Panels, Barcode Reader Interfaces, KVM and Human-Interface Equipment, Key Telephone and Communication Terminals, Industrial Control and Utility Products, Legacy Embedded Control Modules.
Security and Alarm Control Panels
The W78E058DPG fits security and alarm control equipment that needs an 8-bit 8052-compatible core, 32 KB of Flash program memory, and 36 I/O pins. Its 2.4 V to 5.5 V operating range supports legacy 5 V panels and lower-voltage sensor interfaces, while the PLCC package simplifies socketed service assemblies. The 40 MHz maximum CPU rate provides deterministic control for keypad scanning, zone monitoring, relay sequencing, and status feedback. Because the family is NRND, engineers should qualify a supported successor for new products and preserve an exact-device BOM for maintenance builds.
Được đề xuất
Barcode Reader Interfaces
The W78E058DPG can manage a barcode-reader interface where a compact embedded controller must decode or transport serial data while supervising switches and indicators. Its 32 KB Flash capacity provides room for protocol and decoding firmware, 36 I/O pins support peripheral selection and status signaling, and the 40 MHz 8052-compatible core supports responsive real-time control. The 2.4 V to 5.5 V range accommodates both legacy and modern interface levels, subject to each attached device's requirements. Firmware and peripheral mappings must be checked against the manufacturer datasheet before using a replacement MCU.
Được đề xuất
KVM and Human-Interface Equipment
The W78E058DPG is suitable for compact KVM controllers and user-interface modules that translate switch activity, LEDs, and serial commands into device control. Its 36 I/O pins provide substantial connection capacity for panel inputs and indicator outputs, while 32 KB of Flash accommodates control firmware and configuration tables. The 8052-compatible architecture is familiar in embedded KVM products, and the PLCC package supports sockets where field replacement is valuable. For new KVM platforms, evaluate the device's NRND status against currently supported MCUs with validated USB, HID, or communications peripherals.
Được đề xuất
Key Telephone and Communication Terminals
The W78E058DPG can support key-phone and communication-terminal functions that combine button scanning, display indication, call signaling, and serial communications. Its 8-bit 8052-compatible core handles deterministic peripheral tasks, 36 I/O pins reduce the need for additional logic, and 32 KB Flash supports menu, signaling, and communication routines. The wide 2.4 V to 5.5 V supply range can simplify mixed legacy-voltage designs, although external line-interface circuits still require proper isolation and protection. Verify oscillator, timer, UART, and port-multiplexing details against the exact device data before board release.
Được đề xuất
Industrial Control and Utility Products
The W78E058DPG is applicable to compact industrial controllers where deterministic 8-bit logic, 36 I/O pins, and 32 KB Flash are sufficient. The -40°C to +85°C specification supports extended-temperature equipment, while the 44-pin PLCC package facilitates socketed legacy products. Typical tasks include discrete actuator sequencing, sensor-condition monitoring, local buttons, and communication between modules. Industrial adoption should include normal ESD, surge, brownout, and EMC design practices, plus review of operating-life expectations because the W78E058D family is marked NRND.
Được đề xuất
Legacy Embedded Control Modules
The W78E058DPG is primarily useful in legacy embedded-control modules whose firmware and PCB were designed around the W78E058D family. Its 8052-compatible instruction set supports familiarity with established 8051 toolchains, while 40 MHz operation, 32 KB Flash, and 36 I/O pins define the device's performance envelope. For repair and continuation programs, the part can reduce redesign risk when the same package, firmware, clock, and electrical configuration are retained. For new products, choose an active microcontroller with a supported lifecycle and modern peripherals instead of expanding an NRND platform.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho W78E058DPG — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | W78E058B40PL |
|---|---|---|
| Package | 44-pin PLCC | 44-pin PLCC |
| Brand | Nuvoton Technology Corporation | Nuvoton Technology Corporation |
Bảo phân biệt quan trọng
- Flash-backed 8052-compatible control platform (vsW78E058B40PL)
- Wide legacy-compatible operating range (vsW78E058B40PL)
- Established PLCC serviceability (vsW78E058B40PL)
Ghi chú thiết kế
Design the supply rail for the verified 2.4 V to 5.5 V operating range and account for 5 V legacy peripherals that may not tolerate lower rails. Place the required bypass capacitors close to the device supply and ground pins using the shortest possible return path. Brownout behavior, 5 V input tolerance, and startup sequencing must be taken from the manufacturer datasheet rather than inferred from the distributor summary.
Preserve the manufacturer's 44-pin PLCC pad geometry, pin-1 orientation, and socket keying; mechanical rotation is not a drop-in change. Keep oscillator, reset, and programming-related traces short and away from noisy switching nodes. Verify that a replacement such as W78E058B40PL uses the same pin functions and alternate-function mapping rather than relying only on the shared PLCC package.
Do not treat a shared package as proof of complete drop-in compatibility. Compare the W78E058DPG and proposed replacement for Flash size, RAM, clock limits, port multiplexing, peripheral register behavior, reset pins, and programming interface. The NRND status also means that incoming-device traceability and approved sourcing should be maintained for production continuity.
Thông tin tuân thủ
The verified Mouser snippet explicitly identifies the device as Pb-free. No explicit RoHS, REACH, halogen-free, conflict-minerals, or AEC-Q100 declaration was supplied, so those values remain unknown. The W78E058D family is identified by Nuvoton as Not Recommended for New Designs.
