WM8731CLSEFL Stereo Audio Codec with Headphone Driver | Cirrus Logic
MPN: WM8731CLSEFL ✓ Hoạt độngWM8731CLSEFL Tóm tắt
An audio codec is a mixed-signal semiconductor that converts analog audio into digital data and converts digital audio back into analog signals. In the wider hierarchy, the WM8731CLSEFL belongs to the audio codec category, combines an ADC and DAC, and operates as an interface IC for portable audio equipment. This integration helps simplify board space and signal routing compared with separate converters, amplifiers, and control logic. The exact sampling-rate, voltage, dynamic-range, and headphone-output details should be confirmed against the manufacturer datasheet before final schematic and firmware release.
Key documented characteristics include a 24-bit serial audio interface, a 28-QFN package measuring 5 x 5 mm, and support for portable Internet audio applications. The WM8731 is manufactured on a CMOS process and is identified as an ESD-sensitive device, so production handling should include appropriate electrostatic-discharge controls. The integrated headphone-driver architecture is particularly relevant to portable products that need a local audio output without a separate output amplifier.
The WM8731CLSEFL can be paired with a host processor through its serial digital audio interface, allowing recorded or streamed audio to be decoded and mixed within the same system. Its compact package is suitable for space-constrained portable equipment, while the integrated analog and digital functions support a streamlined audio signal chain. Designers should confirm logical-interface levels, clocking, sample-rate support, analog input configuration, and external component requirements against the manufacturer datasheet.
Typical uses include portable audio players, Internet-audio products, headset electronics, portable media devices, and compact embedded audio systems. The device is also relevant to designs where a headphone output and microphone or line input must coexist with a serial digital audio processor. The integration can reduce external component count, although headphone-output loading, thermal conditions, and analog grounding still require careful validation.
A key design consideration is the separation of analog and digital signal paths. Keep microphone and headphone-related analog routing away from high-speed serial clock lines, provide the decoupling and filtering specified by the manufacturer, and use stable low-noise supplies for audio performance. Because the device includes sensitive mixed-signal circuitry, PCB layout and grounding can be as important as the nominal codec specifications.
This product page combines the manufacturer datasheet identity, package information, available distributor listings, lifecycle-oriented sourcing context, and practical integration guidance. It is intended to help engineers identify the correct footprint, plan the surrounding audio architecture, and determine whether the WM8731CLSEFL matches the required portable-audio application.
Bộ thay thế dễ dàng lắp đặt cho WM8731CLSEFL — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với WM8731CLSEFL (cùng hình factor và footprint) — khác nhau ở Package.
WM8731CLSEFL/R
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
WM8731CSEFL
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →WM8731CLSEFL Tỷ lệ tối đa & tính chất điện
| Product Type | Stereo audio codec with headphone driver |
| Audio Interface | 24-bit serial |
| Hộp | 28-QFN (5 x 5 mm) |
| Số chân | 28 pins |
| Process Technology | CMOS |
| ESD Classification | ESD-sensitive device |
| ADC Resolution | 24-bit |
| DAC Resolution | 24-bit |
| Headphone Driver | Integrated |
| Khoảng nhiệt độ hoạt động | -40 °C to +85 °C |
| Digital Audio Interface | Serial audio interface |
| Kiểu lắp đặt | Surface mount |
| Trạng thái RoHS | unknown |
| REACH Status | unknown |
Hướng dẫn cấu hình chân WM8731CLSEFL 28-qfn (5 x 5 mm)
Cấu hình chân cho WM8731CLSEFL (28-qfn (5 x 5 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho WM8731CLSEFL.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
WM8731CLSEFL phù hợp cho 6 Áp dụngs: Portable Internet Audio Player, Digital Headset Electronics, Portable Media Device, USB Audio Accessory, Industrial Audio Control Module, Recording and Voice-Capture Product.
Portable Internet Audio Player
The WM8731CLSEFL fits portable Internet-audio players that require a 24-bit serial audio path and integrated headphone amplification in a compact board area. It can receive digital audio from a host processor, convert it through the stereo codec, and drive a headphone output without requiring a separate output-amplifier stage. Its 28-QFN 5 x 5 mm package helps preserve space in portable enclosures, while operation down to 1.8 V supports low-voltage system architectures. Designers should use the manufacturer application circuit as the basis for analog filtering, supply decoupling, clocking, and exposed-pad layout.
Được đề xuất
Digital Headset Electronics
The WM8731CLSEFL is suited to digital headsets where a compact stereo codec and headphone driver can share the same 28-QFN package. The 24-bit serial audio interface supports high-resolution digital audio content, while the integrated headphone stage reduces the number of external analog components needed near the connector. A headset design can pair this codec with a low-power controller while routing microphone input into the recording path. The practical constraints are headphone impedance, available output power, analog-noise performance, and the exact grounding and filtering recommendations in the manufacturer datasheet.
Được đề xuất
Portable Media Device
A portable media device can use the WM8731CLSEFL to consolidate digital-audio reception, conversion, and headphone output in a small mixed-signal block. The 24-bit codec format supports high-resolution playback, and the 28-QFN package reduces board footprint relative to discrete converters and an output amplifier. Operation from 1.8 V to 3.6 V is particularly useful for systems with a low-voltage battery-derived rail. Battery efficiency still depends on the selected operating mode, analog biasing, headphone load, and system power-management architecture, so the complete power budget should be measured on hardware.
Được đề xuất
USB Audio Accessory
The WM8731CLSEFL can serve as the analog audio endpoint in a USB audio accessory, accepting digital samples from a USB-capable controller and producing stereo headphone output. Its 24-bit serial interface aligns with high-resolution USB-audio formats, and the integrated driver helps reduce analog component count beside the USB connector. The design must still account for clock generation, sample-rate support, digital-to-analog filtering, headphone loading, and ground separation. For products requiring certified USB classes or immediate production quantities, the complete host-device design should be validated with the intended controller and accessory firmware.
Được đề xuất
Industrial Audio Control Module
The WM8731CLSEFL can provide a compact stereo audio interface in industrial control modules that include local speakers, headphone connections, or analog monitoring. Its -40 °C to +85 °C operating range supports extended commercial and industrial environments, and the integrated headphone driver is useful where a local monitoring output is required. Industrial designs should protect the codec from conductive contamination, mechanical stress, and supply transients while maintaining the analog layout specified by the manufacturer. The absence of a high-power speaker driver means external amplification may still be required for higher-output speakers.
Được đề xuất
Recording and Voice-Capture Product
The WM8731CLSEFL is appropriate for compact recording products requiring a digital stereo interface, analog audio capture, and headphone monitoring. The stereo codec architecture allows the same mixed-signal device to support playback and recording paths, while its serial interface connects to a host processor for storage or streaming. Analog input conditioning, microphone bias, anti-alias filtering, and grounding require careful implementation to preserve usable signal quality. The 28-QFN footprint is compact, but exposed-pad connection and analog supply cleanliness must follow the manufacturer land-pattern and application guidance.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho WM8731CLSEFL — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | WM8731CLSEFL/R | WM8731CSEFL |
|---|---|---|---|
| Package | 28-QFN (5 x 5 mm) | 28-QFN (5 x 5 mm) | 28-QFN (5 x 5 mm) |
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Minimum Supply Voltage | 1.8 V | 1.8 V | 2.7 V |
| Maximum Supply Voltage | 3.6 V | 3.6 V | 3.6 V |
Bảo phân biệt quan trọng
- Lower minimum operating supply than the WM8731CSEFL (vsWM8731CSEFL)
- Identical family architecture in a documented drop-in suffix option (vsWM8731CLSEFL/R)
- Integrated conversion and headphone output in one compact package (vsWM8731CSEFL)
Ghi chú thiết kế
Separate the analog and digital return paths as closely as the manufacturer application circuit permits. Place audio input and headphone-output components near their associated pins, keep high-speed serial clock traces away from microphone and line-input nodes, and connect the exposed pad using the recommended land pattern. The 28-QFN footprint has fine-pitch terminals, so verify pad dimensions and paste stencil geometry against the current package drawing before releasing artwork.
Design the supply network for both the 1.8 V minimum operating requirement and the 3.6 V maximum supported by the WM8731CLSEFL. Use the manufacturer-specified bypass capacitance and route analog and digital supplies to their respective pins with the shortest practical connections. Confirm startup sequencing, rail tolerances, and dropout behavior in the final system rather than assuming that a nominal 1.8 V rail remains valid throughout battery discharge.
Do not assume the WM8731CSEFL is an automatic substitute for the WM8731CLSEFL: its documented minimum supply voltage is 2.7 V rather than 1.8 V. In addition, the /R suffix identifies a different factory-pack quantity, not an electrically different codec. Verify the complete orderable MPN, reel orientation, exposed-pad treatment, and minimum rail before approving either replacement on an existing PCB.
Treat the digital audio interface as a clock-sensitive mixed-signal design. Route serial data and clock signals over continuous ground planes, minimize stub branches, and apply source-series or termination techniques only after evaluating the host timing and signal levels. Keep the headphone and microphone networks away from switching supplies and high-current return paths to reduce audible artifacts and converter error.
Thông tin tuân thủ
The WM8731 comparison information addresses RoHS and REACH status, but no explicit compliance result for this exact MPN is established. The device is a commercial audio codec rather than an automotive-qualified AEC-Q100 device.