WM8904CGEFL/V - Stereo Audio Codec 24-Bit | Cirrus Logic
MPN: WM8904CGEFL/V ✓ Hoạt độngWM8904CGEFL/V Tóm tắt
An audio codec is an integrated semiconductor that converts between digital audio data and analog microphone, line, and headphone signals. In the signal chain, an ADC represents incoming analog audio as digital samples, while a DAC converts digital playback data back into an analog output. The WM8904 combines these functions with integrated headphone and line-output circuitry, reducing the number of external active components required in portable audio systems.
The WM8904CGEFL/V supports stereo playback through ground-referenced headphone and line outputs. Because the outputs are ground referenced, their signal is centered around the analog ground reference rather than a divided supply midpoint. The manufacturer states that the outputs eliminate AC coupling capacitors and include common-mode feedback paths that help reject ground noise. These features are particularly useful in portable products where component count, board area, power consumption, and low-frequency noise directly affect user experience.
Its Class-W headphone amplifiers incorporate a dual-mode charge-pump architecture to optimize efficiency and power consumption during playback. This architecture supports the device's ultra-low-power design goal while providing integrated headphone drive. The 24-bit codec resolution and two-channel conversion capability make the device suitable for high-quality voice, music, and multimedia playback. Exact conversion rates, signal-to-noise ratios, headphone-output limits, clock frequencies, and supply-voltage limits should be confirmed in the manufacturer datasheet for the selected production configuration.
Typical applications include smartphones, portable media players, personal audio devices, portable game consoles, and compact connected audio products. In a smartphone or portable player, the codec can accept digital audio from an application processor, convert it through the DAC, and drive stereo headphones or line outputs while minimizing external passive-component count. The same architecture is suitable for industrial test equipment or voice-enabled systems where low power and a small footprint are important.
Layout should prioritize short, quiet analog paths between the codec, microphone or line inputs, and headphone outputs. Place decoupling capacitors close to their associated supply pins and route digital clock and data signals away from sensitive analog inputs. Headphone and line output routing should also account for output impedance, cable loading, and the external components recommended by the manufacturer datasheet. The exposed-pad thermal and layout requirements in the package drawing should be followed to maintain reliable operation across the intended temperature range.
This product page combines package, codec, interface, and amplifier details with drop-in replacement information, application guidance, comparison parameters, and PCB-focused design notes. It is structured to help engineers identify whether the WM8904CGEFL/V matches the required channel count, package footprint, power level, and portable-audio architecture before beginning board layout or production sourcing.
Bộ thay thế dễ dàng lắp đặt cho WM8904CGEFL/V — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
WM8904CGEFL/RV
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
WM8904CGEFL
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
WM8904CGEFL/V Tỷ lệ tối đa & tính chất điện
| Product Type | Stereo audio codec |
| Signal Resolution | 24 bit |
| ADC Configuration | Stereo ADC |
| DAC Configuration | Stereo DAC |
| Hộp | 32-pin QFN |
| Package Dimensions | 4 mm x 4 mm |
| Headphone Output | Stereo ground-referenced output |
| Line Output | Stereo ground-referenced output |
| Headphone Amplifier Technology | Wolfson Class-W |
| Charge-Pump Architecture | Dual-mode |
| Output Coupling Capacitors | Not required for ground-referenced outputs |
| Common-Mode Feedback | Included for ground-noise rejection |
| Primary Application | Portable audio |
| Power Class | Ultra-low power |
| Kiểu lắp đặt | Surface mount |
| Trạng thái RoHS | EU RoHS compliant |
| REACH Status | REACH compliant |
| Conflict Minerals Status | DRC conflict free |
Hướng dẫn cấu hình chân WM8904CGEFL/V 4 mm x 4 mm
Cấu hình chân cho WM8904CGEFL/V (4 mm x 4 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho WM8904CGEFL/V.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
WM8904CGEFL/V phù hợp cho 6 Áp dụngs: Smartphone Audio Playback, Portable Music Player, Voice-Enabled IoT Device, Portable Game Console, Industrial Audio Test Module, Digital Audio Accessory.
Smartphone Audio Playback
The WM8904CGEFL/V suits smartphones that require 24-bit stereo playback from an application processor while limiting board area and external passive components. Its stereo DAC feeds ground-referenced headphone and line outputs, and the absence of output AC coupling capacitors simplifies the analog output network. The dual-mode charge-pump architecture in the Class-W headphone amplifiers supports efficient portable operation. Integration of the ADC also allows the same device to handle microphone capture when the system requires full-duplex voice. Before schematic release, verify the device's supported digital interface, analog and digital supply ranges, clocking method, microphone bias arrangement, and maximum headphone load against the phone platform requirements.
Được đề xuất
Portable Music Player
A portable music player can use the WM8904CGEFL/V to convert digital audio into a stereo analog signal and drive headphones without discrete AC coupling capacitors. The 24-bit stereo DAC path supports high-resolution audio content, while ground-referenced outputs simplify common-mode behavior relative to a mid-supply-referenced amplifier. The 32-pin 4 mm by 4 mm QFN package helps preserve board area in compact enclosures. Power efficiency during playback is addressed by the dual-mode charge-pump Class-W headphone architecture. Designers should still evaluate battery-current targets, headphone impedance, startup behavior, analog supply sequencing, and the heat generated at the maximum expected output level.
Được đề xuất
Voice-Enabled IoT Device
The WM8904CGEFL/V fits voice-enabled IoT products that need compact stereo or microphone signal handling without a separate ADC and DAC. Its integrated 24-bit stereo ADC can capture analog voice input, while the stereo DAC supports monitoring or playback. The QFN-32 footprint reduces the space required for the audio subsystem, and the ground-referenced line outputs can reduce passive-component count. Low-power portable-audio optimization is beneficial in sensor nodes and connected home devices that operate from limited energy budgets. Firmware configuration, supported sample rates, microphone input topology, digital clocking, and electromagnetic compatibility around sensitive analog lines should be validated early in the design cycle.
Được đề xuất
Portable Game Console
Portable game consoles benefit from the WM8904CGEFL/V's combination of 24-bit stereo conversion, integrated headphone drive, and a compact 4 mm by 4 mm QFN package. The device can accept digital audio from a game processor and provide low-latency analog headphone output through a ground-referenced Class-W amplifier. Removing output coupling capacitors reduces component count and board space, while the dual-mode charge pump is designed to optimize playback efficiency. The implementation should account for transient sound effects, connector protection, channel imbalance checks, pop-noise behavior during mode transitions, and heat dissipation. The exact supported digital audio format and maximum sample rate must match the console's audio architecture.
Được đề xuất
Industrial Audio Test Module
The WM8904CGEFL/V can form the core of a compact industrial audio test module when the same board must generate and capture stereo audio. The integrated 24-bit ADC and DAC eliminates the need to pair separate conversion ICs, while the headphone and line outputs provide useful test signals for speakers, cables, and microphone products. Its ground-referenced outputs and common-mode feedback paths can simplify measurement setup and improve ground-noise rejection. For test equipment, the design team should verify clock jitter requirements, supported digital audio formats, analog input ranges, output impedance, and the accuracy of the external reference and decoupling network. EMI control is also important when the module operates near switching converters or high-speed digital circuitry.
Được đề xuất
Digital Audio Accessory
A digital-audio accessory can use the WM8904CGEFL/V to bridge a digital audio source to analog headphones or line-level equipment. The 24-bit stereo codec supports high-resolution playback, and the integrated ground-referenced outputs remove conventional output coupling capacitors. Its compact 32-pin QFN package is useful for dongles, compact control surfaces, and portable listening devices. The dual-mode charge-pump headphone architecture supports efficient playback when operating from a USB or battery-derived supply. Engineering validation should include supported bus rates, audio-channel format, digital-audio synchronization, headphone impedance, ESD protection at exposed connectors, and isolation between noisy digital return currents and the analog output path.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho WM8904CGEFL/V — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | WM8904CGEFL/RV | WM8904CGEFL |
|---|---|---|---|
| Package | QFN-32 (4x4 mm) | QFN-32 (4x4 mm) | QFN-32 (4x4 mm) |
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Product Type | Stereo audio codec | Stereo audio codec | Stereo audio codec |
| Signal Resolution | 24 bit | 24 bit | 24 bit |
| ADC Configuration | Stereo ADC | Stereo ADC | Stereo ADC |
| DAC Configuration | Stereo DAC | Stereo DAC | Stereo DAC |
| Headphone Output Architecture | Ground-referenced Class-W output | Ground-referenced Class-W output | Ground-referenced Class-W output |
| Charge-Pump Architecture | Dual-mode | Dual-mode | Dual-mode |
| Output Coupling Capacitors | Not required for ground-referenced outputs | Not required for ground-referenced outputs | Not required for ground-referenced outputs |
| Common-Mode Feedback | Included | Included | Included |
Bảo phân biệt quan trọng
- Ground-referenced outputs reduce external passive-component count (vsWM8904CGEFL/RV)
- Integrated 24-bit stereo conversion in a compact package (vsWM8904CGEFL)
- Portable-audio-focused Class-W headphone architecture (vsWM8904CGEFL/RV)
Ghi chú thiết kế
Place input, output, and supply decoupling components directly beside their associated QFN pins, following the capacitance values and placement shown in the manufacturer application information. Keep the exposed pad connection and ground-plane arrangement consistent with the package drawing. Maintain short return paths for the analog ground and headphone outputs so that switching currents do not share the sensitive signal conductors.
Separate digital audio data and clock routing from microphone and line-input traces, especially when the codec operates beside a switching regulator or high-speed processor. Use a continuous ground reference beneath the analog section and avoid routing headphone or microphone signals across split-plane boundaries. Verify the digital-interface levels and signal-integrity requirements in the electrical-characteristics and application sections before finalizing trace geometry.
Do not assume that every WM8904 ordering suffix is interchangeable without checking the manufacturer ordering table. WM8904CGEFL/RV and WM8904CGEFL are identified as equivalent core variants, but the physical suffix can encode orderable packaging information. Confirm reel orientation, pin compatibility, moisture handling, clock configuration, and supply sequencing before releasing production artwork.
Thông tin tuân thủ
EU RoHS compliance, REACH compliance, and DRC conflict-free status are stated for WM8904CGEFL/V. AEC-Q100 status is not applicable to this portable-audio codec application. Lead-free and halogen-free status are not stated.