XA7A50T-1CSG324Q - 52,160-LC Automotive Artix-7 FPGA | AMD
MPN: XA7A50T-1CSG324Q ✓ Hoạt độngXA7A50T-1CSG324Q Tóm tắt
An FPGA is a programmable semiconductor whose configurable logic blocks, block RAM, DSP resources, and I/O blocks can be interconnected to implement digital systems. Within the device hierarchy, this component belongs to the FPGA and CPLD category and uses a parallel programmable architecture rather than a fixed instruction set. Its configuration logic allows the same hardware to implement control, communication, signal processing, or interface functions.
The XA7A50T-1CSG324Q provides a -1 speed grade, 8,150 configurable logic blocks, and 52,160 logic cells. Its 1.0 V core supply is supplemented by 1.8 V, 2.5 V, and 3.3 V I/O capability. Automotive qualification extends its suitability for demanding vehicle electronics, while the extended -40°C to +125°C operating range addresses temperature extremes commonly encountered in vehicle environments.
The device includes 120 DSP48E1 slices, enabling parallel arithmetic and fixed-point signal-processing pipelines without relying on external accelerators. Four GTP transceivers provide high-speed serial capability for communication links. The 324-ball CSBGA package supports dense board integration, but its fine pitch requires careful power distribution, escape routing, thermal analysis, and assembly planning.
Typical applications include automotive body and chassis controllers, sensor-fusion preprocessing, industrial automation equipment, low-cost instrument interfaces, and compact communication gateways. In each case, the programmable architecture allows field updates and hardware reuse while providing enough DSP, RAM, and serial I/O resources for real-time control.
Designers should separate core and I/O supplies, place decoupling capacitors according to the manufacturer's recommended power architecture, and validate high-speed transceiver layouts against the relevant Artix-7 guidance. Because the CSBGA package concentrates 324 contacts on a 15 x 15 mm area, PCB stack-up, via-in-pad treatment, solder-mask design, and assembly capability directly affect yield.
This product page combines the identified electrical and packaging characteristics, package-level replacement considerations, design guidance, and application engineering context to support faster component selection and PCB planning.
Bộ thay thế dễ dàng lắp đặt cho XA7A50T-1CSG324Q — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XA7A50T-1CSG324Q (cùng hình factor và footprint) — khác nhau ở Mounting Type, Speed Grade, Core Supply Voltage, Device Type, Package.
XA7A50T-1CSG324I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XA7A50T-2CSG324Q
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XA7A50T-2CSG324I
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XA7A50T-1CSG324E
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC7A50T-1CSG324C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XA7A50T-1CSG324Q Tỷ lệ tối đa & tính chất điện
| Device Type | Artix-7 XA FPGA |
| Logic Cells | 52,160 cells |
| Configurable Logic Blocks | 8,150 blocks |
| Block RAM | 2.7 Mb |
| Total RAM Bits | 2,764,800 bits |
| DSP48E1 Slices | 120 slices |
| GTP Transceivers | 4 transceivers |
| User I/O Count | 210 I/Os |
| Core Supply Voltage | 1.0 V |
| I/O Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| Speed Grade | -1 |
| Nhiệt độ hoạt động | -40°C to +125°C |
| Hộp | 324-ball CSBGA, 15 x 15 mm |
| Automotive Qualification | AEC-Q100 qualified |
| Trạng thái RoHS | Compliant |
| REACH Status | Compliant |
| Kiểu lắp đặt | Surface-mount BGA |
Hướng dẫn cấu hình chân XA7A50T-1CSG324Q 324-ball csbga, 15 x 15 mm
Cấu hình chân cho XA7A50T-1CSG324Q (324-ball csbga, 15 x 15 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XA7A50T-1CSG324Q.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XA7A50T-1CSG324Q phù hợp cho 6 Áp dụngs: Automotive Body Control Module, Vehicle Sensor Fusion, Industrial Automation Controller, Machine Vision Edge Processor, Secure Industrial Communication Gateway, Aerospace and Defense Test Instrument.
Automotive Body Control Module
The XA7A50T-1CSG324Q fits a body control module because it combines 52,160 logic cells, 210 user I/Os, and 2,764,800 RAM bits in a 324-ball CSBGA package. The logic fabric can consolidate door, lighting, wiper, central-locking, and diagnostic functions while the -40°C to +125°C range and AEC-Q100 qualification address vehicle environmental requirements. Its 120 DSP48E1 slices can also support signal conditioning around body sensors. The principal engineering trade-off is the fine-pitch BGA assembly required for the 15 x 15 mm device.
Được đề xuất
Vehicle Sensor Fusion
The XA7A50T-1CSG324Q is suitable for vehicle sensor-fusion preprocessing because 120 DSP48E1 slices provide parallel arithmetic for filtering, weighting, and fixed-point transforms. The 2,764,800 block-RAM bits can buffer time-series samples from radar, lidar, wheel-speed, inertial, and environmental sensors before fusion or communication. Four GTP transceivers support high-speed links, while the programmable logic manages acquisition timing and data routing. Engineers should budget DSP pipelines and RAM carefully to preserve timing closure in the 324-ball package.
Được đề xuất
Industrial Automation Controller
The XA7A50T-1CSG324Q can implement a compact industrial automation controller with programmable control logic, 210 user I/Os, and four GTP transceivers. Logic cells accommodate motion sequencing and machine-state logic, block RAM supports protocol frames and diagnostics, and DSP slices can accelerate position or vibration calculations. The -40°C to +125°C range suits equipment exposed to industrial temperature extremes. Its single-device integration reduces inter-board connections, although power delivery and thermal design must accommodate the combined core, I/O, DSP, and transceiver activity.
Được đề xuất
Machine Vision Edge Processor
The XA7A50T-1CSG324Q is applicable to machine-vision edge processing because its 120 DSP48E1 slices support parallel pixel filtering and feature calculations, while 2,764,800 RAM bits provide line buffers and working memory. Four GTP transceivers can carry image or sensor data between cameras, processors, and downstream logic. The 210 user I/Os provide parallel sensor, trigger, and control connections. A practical design should partition DSP and RAM resources early, then validate the high-speed BGA escape routing and independent supply rails before layout sign-off.
Được đề xuất
Secure Industrial Communication Gateway
The XA7A50T-1CSG324Q supports a secure industrial communication gateway by combining four GTP transceivers with programmable protocol and packet-processing logic. The FPGA fabric can implement multiple Ethernet-facing interfaces, buffering, authentication control, and monitoring functions, while 210 I/Os connect local sensors and actuators. Its broad -40°C to +125°C range is useful in industrial enclosures. Designers should reserve logic and RAM for security functions, constrain transceiver interfaces properly, and keep sensitive configuration and key-storage practices separate from the general-purpose fabric.
Được đề xuất
Aerospace and Defense Test Instrument
The XA7A50T-1CSG324Q can serve as the programmable heart of a compact test instrument when its programmable logic, DSP slices, and block RAM are used for acquisition, real-time analysis, and data formatting. The four high-speed transceivers support fast test-data paths, and 210 I/Os provide broad control and instrumentation connectivity. The wide -40°C to +125°C operating range supports harsh test environments, but aerospace and defense use requires program-specific qualification, configuration-security controls, radiation-impact assessment, and procurement traceability beyond the component's automotive qualification.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XA7A50T-1CSG324Q — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XA7A50T-1CSG324I | XA7A50T-2CSG324Q | XA7A50T-2CSG324I | XA7A50T-1CSG324E | XC7A50T-1CSG324C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 324-ball CSBGA, 15 x 15 mm | 324-ball CSBGA, 15 x 15 mm | 324-ball CSBGA, 15 x 15 mm | 324-ball CSBGA, 15 x 15 mm | 324-ball CSBGA, 15 x 15 mm | 324-ball CSBGA, 15 x 15 mm |
| Device Family | Artix-7 XA | Artix-7 XA | Artix-7 XA | Artix-7 XA | Artix-7 XA | Artix-7 |
| Logic Cells | 52,160 cells | 52,160 cells | 52,160 cells | 52,160 cells | 52,160 cells | 52,160 cells |
| Total RAM Bits | 2,764,800 bits | 2,764,800 bits | 2,764,800 bits | 2,764,800 bits | 2,764,800 bits | 2,764,800 bits |
| DSP48E1 Slices | 120 slices | 120 slices | 120 slices | 120 slices | 120 slices | 120 slices |
| GTP Transceivers | 4 transceivers | 4 transceivers | 4 transceivers | 4 transceivers | 4 transceivers | 4 transceivers |
| User I/O Count | 210 I/Os | 210 I/Os | 210 I/Os | 210 I/Os | 210 I/Os | 210 I/Os |
| Core Supply Voltage | 1.0 V | 1.0 V | 1.0 V | 1.0 V | 1.0 V | 1.0 V |
| Speed Grade | -1 | -1 | -2 | -2 | -1 | -1 |
| Automotive Qualification | AEC-Q100 qualified | Not identified as automotive qualified | AEC-Q100 qualified | Not identified as automotive qualified | Not identified as automotive qualified | Commercial Artix-7 qualification |
Bảo phân biệt quan trọng
- Automotive qualification with a wide operating range (vsXC7A50T-1CSG324C)
- Substantial integrated signal-processing capacity (vsXA7A50T-1CSG324I)
- High-speed serial connectivity in the same package (vsXA7A50T-2CSG324Q)
- Complete logic, RAM, and DSP integration (vsXA7A50T-2CSG324I)
Ghi chú thiết kế
Implement separate 1.0 V core and applicable 1.8 V, 2.5 V, or 3.3 V I/O supplies, then assign each BGA power ball according to the AMD package map. Place the required decoupling directly at the relevant supply and ground balls, use multiple current paths for the core and I/O rails, and account for DSP and transceiver activity in worst-case power analysis. Validate sequencing, voltage tolerances, and rail ripple against the manufacturer data sheet before release.
The 324-ball CSBGA requires a constrained escape-routing strategy because all device connectivity is concentrated on a 15 x 15 mm footprint. Follow the AMD package pinout files and CSG324 land pattern, preserve via-in-pad and solder-mask requirements, and verify the PCB stack-up against the assembly process. The layout should also provide thermal-via access under the device because simultaneous core, I/O, DSP, and GTP activity can create localized heating.
Treat the four GTP transceiver interfaces as controlled-impedance, high-speed nets and use the Artix-7 transceiver layout guidance for reference planes, via transitions, and connector escape paths. Keep configuration and sensitive programming interfaces away from noisy power and switching nodes. Maintain continuous return paths beneath high-speed routes and check the complete board with the actual stack-up, connector geometry, and enclosure rather than relying only on schematic partitioning.
Do not treat a footprint-compatible commercial Artix-7 FPGA as automatically equivalent to the automotive-qualified XA7A50T-1CSG324Q. The XC7A50T-1CSG324C shares the same principal resources and CSG324 package, but qualification and temperature intent differ. Likewise, changing the speed grade from -1 to -2 can alter timing margins even though the logic resources remain unchanged. Review timing, qualification, temperature, lifecycle, and procurement requirements together before approving a substitution.
Thông tin tuân thủ
RoHS and REACH compliance are identified for this ordering code. The XA7A50T-1CSG324Q is associated with AEC-Q100 qualification and DRC Conflict Free status.