XC3S400A-4FGG400C - 400K Gate Spartan-3A FPGA | AMD
MPN: XC3S400A-4FGG400C ✗ Cuối đờiXC3S400A-4FGG400C Tóm tắt
An FPGA is a semiconductor whose internal digital circuits are configured after manufacture. A field-programmable gate array belongs to the programmable-logic hierarchy: FPGA → programmable logic device → digital semiconductor. Unlike a fixed-function microcontroller, an FPGA can implement parallel data paths, protocol bridges, control logic, and signal processing in one device while retaining reprogrammability for design revisions or field updates.
The Spartan-3A architecture combines 8,064 logic cells with 311 I/O in a compact 400-ball FBGA package. Its -4 speed designation identifies the performance grade, while the G package code identifies the lead-free 400-ball option. The device provides substantially more parallel I/O than typical low-pin-count microcontrollers, making it useful when several buses, converters, counters, or acquisition channels must operate concurrently.
The XC3S400A family was created for high-volume, cost-sensitive systems. A 400K-gate device can consolidate control logic, interface translation, and limited parallel processing without requiring a larger FPGA. Its 1.2 V core architecture simplifies power partitioning when the board also uses 3.3 V I/O, although board-level voltage compatibility must be evaluated using the family datasheet rather than assumed from the package designation.
Typical uses include industrial automation, motor and motion control, programmable logic controllers, protocol conversion, embedded test equipment, communications interfaces, and data-acquisition control. The large I/O count is especially useful for parallel ADC and DAC control, industrial data acquisition, and board-level interconnect logic. A high pin count also makes careful escape routing and layer planning essential.
PCB implementation should preserve short configuration and clock paths, provide clean power planes for the 1.2 V core, and account for the 400-ball land pattern. Designers should also use the AMD Spartan-3A family pinout and configuration guidance to assign dedicated configuration pins and implement a reliable startup and JTAG arrangement.
This product page combines the exact device identity, package, logic-capacity information, replacement analysis, comparison data, and implementation guidance needed to evaluate the XC3S400A-4FGG400C for legacy, industrial, and cost-sensitive programmable-logic designs.
Bộ thay thế dễ dàng lắp đặt cho XC3S400A-4FGG400C — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
XC3S400A-4FGG400I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC3S400A-5FGG400C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC3S400A-4FG400C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC3S400AN-4FGG400C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC3S400AN-4FGG400I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC3S400A-4FGG400C Tỷ lệ tối đa & tính chất điện
| FPGA Family | Spartan-3A |
| System Gates | 400,000 gates |
| Configured Logic Cells | 8,064 cells |
| Configurable Logic Blocks | 896 CLBs |
| Input/Output Count | 311 I/O |
| Tần số xung maksimum | 667 MHz |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -4 |
| Hộp | 400-ball FBGA |
| Package Pin Count | 400 pins |
| Package Body Size | 21 mm x 21 mm |
| Kiểu lắp đặt | Surface mount |
| Lead-Free Status | Lead free |
| Trạng thái RoHS | RoHS compliant |
| Product Class | Field-programmable gate array |
| Primary Logic Class | Cost-sensitive programmable logic |
Hướng dẫn cấu hình chân XC3S400A-4FGG400C 21 mm x 21 mm
Cấu hình chân cho XC3S400A-4FGG400C (21 mm x 21 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC3S400A-4FGG400C.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC3S400A-4FGG400C phù hợp cho 6 Áp dụngs: Industrial Automation and PLC Control, Motor and Motion Control, Data Acquisition and Test Systems, Protocol Conversion and Communications Interfaces, Programmable Logic Controller Expansion, Embedded Instrumentation and Signal Conditioning.
Industrial Automation and PLC Control
The XC3S400A-4FGG400C fits industrial automation and PLC control because its 311 I/O can support multiple digital inputs, outputs, interlocks, and bus interfaces while 8,064 logic cells implement sequencing and state-machine functions. The 400,000-gate capacity allows parallel control paths to operate without splitting one machine function across several devices. A -4-grade design can use the 667 MHz maximum clock as a timing reference, but designers should evaluate complete I/O, counter, and communication paths after placement and routing. For operation outside the C-grade temperature range, use the corresponding industrial-temperature FGG400 variant and confirm all operating limits in DS529.
Được đề xuất
Motor and Motion Control
The XC3S400A-4FGG400C is suitable for motor-control and motion-control logic where position capture, pulse generation, sequencing, and protection must operate in parallel. Its 311 I/O provides substantial connectivity for encoder inputs, control signals, and diagnostic outputs, while the programmable architecture allows control algorithms and safety interlocks to be consolidated. The 667 MHz clock rating supports demanding timing architecture, although actual pulse accuracy depends on clock quality, routing, I/O standards, and external drivers. External power stages and isolation should be designed independently from the FPGA logic, with the device used for precise command generation, feedback decoding, and fault sequencing.
Được đề xuất
Data Acquisition and Test Systems
The XC3S400A-4FGG400C works well in parallel data-acquisition and automated-test systems because 311 I/O can organize ADC and DAC control, trigger routing, channel sequencing, and fixture multiplexing. The 8,064 logic cells provide room for timing generation, measurement state machines, and protocol conversion, while the 400,000-system-gate envelope supports a consolidated instrument-control architecture. The 667 MHz maximum clock should not be interpreted as universal acquisition bandwidth; converter settling time, external clock delay, acquisition architecture, and routing margin set the usable rate. Place high-speed interfaces close to their corresponding balls and validate timing with the complete external circuit rather than isolated block-clock targets.
Được đề xuất
Protocol Conversion and Communications Interfaces
The XC3S400A-4FGG400C can consolidate parallel-to-serial protocol conversion, framing, buffering, and interface control in a single FPGA. Its 311 I/O are useful for multi-lane data capture, status signals, clocks, and flow control, while the programmable architecture allows legacy and newer interfaces to share one board. The 400,000-gate capacity provides meaningful parallel-processing headroom compared with a microcontroller, and the 667 MHz clock rating supports high-speed digital logic. Actual interface rates remain governed by I/O timing, board-level skew, transceiver characteristics, and the selected standard. Use device-specific IOB timing constraints and test worst-case routing delays for every high-speed interface.
Được đề xuất
Programmable Logic Controller Expansion
The XC3S400A-4FGG400C can serve as a programmable-logic expansion engine for high-channel-count machines, production fixtures, and legacy control systems. The 311 I/O permits numerous discrete inputs, relay outputs, interlocks, and field-bus signals to be handled concurrently, while 8,064 logic cells support scan sequences, diagnostics, and machine-state management. This integration reduces the number of separate logic devices needed for deterministic parallel control. For safety-related or harsh-environment deployments, select a grade matching the full ambient range, isolate field wiring appropriately, and verify watchdog, power-fail, and configuration-recovery behavior as part of the complete system design.
Được đề xuất
Embedded Instrumentation and Signal Conditioning
The XC3S400A-4FGG400C is applicable to embedded instrumentation that requires deterministic digital control beside analog measurement circuitry. Its large I/O count can handle multiplexers, calibration tables, sensor selection, trigger sequencing, and digital compensation, while the programmable logic fabric supports parallel filters or fixed-point calculations. The 90 nm Spartan-3A implementation and 1.2 V core supply permit integration into multirail instrument designs, but analog and digital grounding must be planned together. Keep high-impedance sensor paths away from switching nodes, use the clock-capable pins for critical synchronous sampling paths, and validate that the implemented design meets the required measurement accuracy and latency.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC3S400A-4FGG400C — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC3S400A-4FGG400I | XC3S400A-5FGG400C | XC3S400A-4FG400C | XC3S400AN-4FGG400C | XC3S400AN-4FGG400I |
|---|---|---|---|---|---|---|
| Brand | Advanced Micro Devices, Inc. | Advanced Micro Devices, Inc. | Advanced Micro Devices, Inc. | Advanced Micro Devices, Inc. | Advanced Micro Devices, Inc. | Advanced Micro Devices, Inc. |
| Package | 400-ball FBGA | 400-ball FBGA | 400-ball FBGA | 400-ball FBGA | 400-ball FBGA | 400-ball FBGA |
| FPGA Family | Spartan-3A | Spartan-3A | Spartan-3A | Spartan-3A | Spartan-3AN | Spartan-3AN |
| System Gates | 400,000 gates | 400,000 gates | 400,000 gates | 400,000 gates | 400,000 gates | 400,000 gates |
| Configurable Logic Cells | 8,064 cells | 8,064 cells | 8,064 cells | 8,064 cells | 8,064 cells | 8,064 cells |
| Speed and Temperature Suffix | -4 speed grade, C suffix | -4 speed grade, I suffix | -5 speed grade, C suffix | -4 speed grade, C suffix | -4 speed grade, C suffix | -4 speed grade, I suffix |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
Bảo phân biệt quan trọng
- Large I/O count relative to its logic class (vsXC3S400A-4FG400C)
- Higher timing headroom through speed-grade selection (vsXC3S400A-4FGG400C)
- Package-compatible path for extended-temperature deployments (vsXC3S400A-4FGG400C)
- Consolidation of parallel control and interface functions (vsXC3S400AN-4FGG400C)
Ghi chú thiết kế
Treat the 400-ball FBGA as a high-density routing and escape problem. Follow the exact FGG400 land pattern and ball map in DS529, place decoupling capacitors near the associated power balls, and maintain uninterrupted reference-plane connectivity beneath the device. Assign the most timing-sensitive interfaces to the appropriate clock-capable and I/O resources before fixing the board outline, because changing the package assignment can force expensive routing-layer and length-matching changes.
Implement the 1.2 V core supply as a dedicated, low-impedance rail and keep it electrically distinct from noisy I/O supplies. Calculate regulator dissipation from the actual VIN-to-1.2 V differential and expected FPGA current rather than the maximum clock frequency alone. Include startup sequencing, power-good monitoring, and configuration behavior in the supply design. For an 8,064-cell Spartan-3A design, activity-dependent current can vary substantially, so validate against both a representative design and the family worst-case limits in DS529.
Provide a thermal path through the 400-ball package and board stack-up. The exact junction-temperature limit and package thermal metrics should be taken from the AMD family documentation for the selected speed and temperature grade. Use copper planes and vias to spread heat, avoid placing heat sources directly beneath the BGA, and evaluate the enclosure's worst-case ambient temperature. Thermal analysis must include regulator loss and nearby converter heating because board-level heat can increase junction temperature beyond what the FPGA alone produces.
Do not treat a matching 400-ball package as sufficient proof of interchangeability. Confirm configuration pins, JTAG behavior, supply sequencing, I/O standards, supported I/O ranges, and bitstream compatibility before replacing XC3S400A-4FGG400C with an I-grade, speed-grade, AN-family, or differently suffixed candidate. Re-run timing and pin constraints after the change. For Spartan-3AN migration, follow the AMD migration procedure and validate the generated bitstream on hardware rather than assuming behavioral equivalence.
Constrain every high-speed interface using device-specific timing requirements rather than the 667 MHz maximum clock rating. Account for clock skew, package delay, board length mismatch, series termination, and I/O drive strength in the complete path. Use clock-capable pins for external clocks and distribute derived clocks only through supported resources. A design that closes internal block timing can still fail at the connector or converter, so validate interface eye timing and overshoot with representative loading.
Thông tin tuân thủ
The device is identified as lead-free and RoHS compliant. REACH, halogen-free, conflict-minerals, and automotive qualification status are unknown.