XC4VFX12-11SF363I - 12,312-Cell Industrial FPGA | AMD
MPN: XC4VFX12-11SF363I ✗ Cuối đờiXC4VFX12-11SF363I Tóm tắt
A field-programmable gate array is a semiconductor whose digital logic, interconnect, and configurable I/O resources can be programmed after fabrication. An FPGA belongs to the programmable-logic hierarchy above ASICs and microcontrollers, providing parallel hardware execution without the mask-production cost of a custom ASIC. Virtex-4 FX devices combine configurable logic, dedicated processing resources, block RAM, digital signal processing blocks, high-speed serial connectivity, and selectable I/O standards within one integrated device.
The XC4VFX12-11SF363I provides 12,312 logic cells for datapath, control, protocol, and image-processing designs. Its 240 inputs and 240 outputs support substantial external connectivity, while the 363-ball package permits dense routing among power, ground, configuration, and user I/O. The Virtex-4 family supports -12, -11, and -10 speed grades, with -12 designated as the highest-performance grade and -11 providing the performance represented by this MPN.
The device uses the Advanced Silicon Modular Block architecture and 90 nm CMOS fabrication to combine configurable logic with dedicated hardware resources. This architecture allows multiple independent processing tasks to execute concurrently rather than relying on sequential instruction execution. Selection logic embedded in the fabric supports routing flexibility, while dedicated block RAM and DSP resources can accelerate data-intensive pipelines when the design maps them appropriately.
Typical applications include telecommunications and networking infrastructure, industrial automation, high-speed data acquisition, broadcast video processing, instrumentation, and embedded signal-processing systems. The large I/O count is particularly useful for parallel ADC or DAC interfaces, digital buses, and custom accelerator fabrics. Existing Virtex-4 designs can preserve the same package footprint when moving between qualified speed, temperature, or device-suffix options, subject to timing and power verification.
A critical design consideration is that a BGA PCB must be designed for fine-pitch assembly, clean power distribution, controlled impedance routing, and careful via-in-pad or through-via escape patterns. Designers should also confirm pin compatibility, configuration requirements, memory-device interfaces, and timing closure before replacing one XC4VFX12 suffix with another. This page combines package, logic-resource, drop-in-alternative, and implementation guidance for faster engineering review.
Bộ thay thế dễ dàng lắp đặt cho XC4VFX12-11SF363I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
XC4VFX12-11SFG363I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC4VFX12-11SF363C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC4VFX12-11SFG363C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC4VFX12-10SFG363I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC4VFX12-12SF363C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC4VFX12-11SF363I Tỷ lệ tối đa & tính chất điện
| Device Type | Virtex-4 FX Field Programmable Gate Array |
| Logic Cells | 12,312 cells |
| Tần số xung maksimum | 1181 MHz |
| Input Terminals | 240 inputs |
| Output Terminals | 240 outputs |
| Hộp | 363-terminal S-PBGA-B363, 0.800 mm pitch |
| Package Type | Square, fine-pitch surface-mount BGA |
| Technology | 90 nm CMOS |
| Architecture | Advanced Silicon Modular Block (ASMBL) architecture |
| Speed Grade | -11 |
| Temperature Grade | Industrial |
| Family Speed Grades Available | -12, -11, and -10 |
Hướng dẫn cấu hình chân XC4VFX12-11SF363I square, fine-pitch surface-mount bga
Cấu hình chân cho XC4VFX12-11SF363I (square, fine-pitch surface-mount bga gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC4VFX12-11SF363I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC4VFX12-11SF363I phù hợp cho 6 Áp dụngs: Industrial Data Acquisition, Telecommunications Networking, Industrial Automation and Control, Broadcast Video Processing, Test and Measurement Instrumentation, Embedded Signal Processing.
Industrial Data Acquisition
The XC4VFX12-11SF363I fits wide parallel data-acquisition systems because its 12,312 logic cells can implement acquisition control, sample buffering, digital filtering, and data formatting in parallel. The 240 inputs and 240 outputs provide substantial board-level connectivity for wide ADCs, DACs, counters, and synchronization signals. Its -11 industrial speed grade supports timing-sensitive signal paths while preserving the Virtex-4 FX 363-ball package already used in industrial control platforms. Implementation should use registered interfaces, pipelined converters, and source-synchronous routing, with power and junction temperature evaluated from actual switching activity.
Được đề xuất
Telecommunications Networking
The XC4VFX12-11SF363I is suitable for telecommunications protocol engines, packet-processing modules, and interface aggregation because the Virtex-4 FX fabric can execute multiple control and data-plane functions concurrently. Its 12,312 logic cells provide capacity for framing, classification, queue management, and test logic, while 240 inputs and 240 outputs support parallel backplane or chip-to-chip connections. The -11 grade balances timing performance and power relative to the -12 grade. System timing, clock quality, and I/O voltage selection must be closed with the complete design rather than inferred from device capacity alone.
Được đề xuất
Industrial Automation and Control
The XC4VFX12-11SF363I can consolidate deterministic machine control, motion sequencing, sensor conditioning, and safety-adjacent monitoring in one programmable-logic device. The 240-input and 240-output resource count supports numerous digital sensors, encoders, actuators, and interlocks without relying solely on a microcontroller peripheral set. Its industrial designation supports deployment in factory environments where the -11 timing grade is sufficient. Engineers should partition critical control into registered logic, constrain clock paths, verify I/O timing against external devices, and assess watchdog behavior for safe fault response.
Được đề xuất
Broadcast Video Processing
The XC4VFX12-11SF363I is appropriate for pixel-format conversion, scaling, color processing, synchronization, and test-pattern generation because programmable fabric can execute several parallel video streams with deterministic latency. Its 12,312 logic cells allow fixed-function pipelines to coexist with control and diagnostics, while 240 inputs and 240 outputs support wide parallel interfaces. The -11 speed grade can meet moderate-resolution processing targets without requiring the family’s highest -12 performance. Video timing constraints, external memory or frame-buffer interfaces, and output standards must be selected before pin assignment and PCB implementation.
Được đề xuất
Test and Measurement Instrumentation
The XC4VFX12-11SF363I supports programmable logic, counters, pattern generation, capture, and sequencing in laboratory instruments because these tasks benefit from parallel deterministic hardware. The 240 inputs and 240 outputs can connect test-head channels, triggers, status signals, and high-speed parallel converters. The -11 industrial grade allows the same architecture to support temperature-challenged test environments, while its configurable logic reduces dependence on sequential processor execution. Calibration, trigger jitter, analog-interface settling, and timing-closure margins remain separate system-level considerations.
Được đề xuất
Embedded Signal Processing
The XC4VFX12-11SF363I is useful for DSP pipelines, digital filtering, modulation, correlation, and real-time sensor-processing systems that benefit from parallel logic and dedicated FPGA resources. Its 12,312-cell fabric can implement parallel arithmetic stages and control logic, while 240 outputs permit broad data exchange with downstream processors or converters. The -11 grade provides a practical performance point between the -10 and -12 options. Resource sharing, block-RAM mapping, DSP utilization, and maximum-clock targets should be checked with the actual synthesis and timing results rather than estimated from the MPN alone.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC4VFX12-11SF363I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC4VFX12-11SFG363I | XC4VFX12-11SF363C | XC4VFX12-11SFG363C | XC4VFX12-10SFG363I | XC4VFX12-12SF363C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 363-terminal S-PBGA-B363 | 363-terminal S-PBGA-B363 | 363-terminal S-PBGA-B363 | 363-terminal S-PBGA-B363 | 363-terminal S-PBGA-B363 | 363-terminal S-PBGA-B363 |
| Logic Cells | 12,312 cells | 12,312 cells | 12,312 cells | 12,312 cells | 12,312 cells | 12,312 cells |
| Speed Grade | -11 | -11 | -11 | -11 | -10 | -12 |
| Temperature Designation | Industrial | Industrial | Commercial | Commercial | Industrial | Commercial |
| Input Terminals | 240 inputs | 240 inputs | 240 inputs | 240 inputs | 240 inputs | 240 inputs |
| Output Terminals | 240 outputs | 240 outputs | 240 outputs | 240 outputs | 240 outputs | 240 outputs |
| Special Features | Virtex-4 FX with Advanced Silicon Modular Block architecture | Virtex-4 FX with Advanced Silicon Modular Block architecture | Virtex-4 FX family option | Virtex-4 FX family option | Virtex-4 FX family option | Virtex-4 FX family option |
Bảo phân biệt quan trọng
- Matches the -11 speed class with same-footprint industrial-family candidates (vsXC4VFX12-10SFG363I)
- Retains industrial temperature designation while offering a same-speed package option (vsXC4VFX12-11SFG363I)
- Avoids the higher power and timing demand associated with the top speed grade (vsXC4VFX12-12SF363C)
- Maintains 240-input and 240-output connectivity in the replacement family (vsXC4VFX12-11SFG363C)
Ghi chú thiết kế
Design the PCB from the official Virtex-4 363-ball mechanical drawing rather than from a generic BGA footprint. The package uses a 0.800 mm ball pitch, so escape routing, pad and mask definitions, solder-mask clearance, via dimensions, and component placement must match the assembly process. A small routing error can accumulate across densely interconnected rows and prevent reliable escape from the device.
Place the required ceramic decoupling capacitance close to each applicable power ball and maintain separate return paths for each supply group. Use the AMD power estimator with realistic clock, I/O, and switching assumptions to establish rail requirements. Peak current, voltage tolerance, and transient response must be checked across speed-grade and temperature corners because average laboratory power is not an adequate worst-case design input.
Estimate junction temperature from total device dissipation, the package thermal model, and the actual PCB copper and airflow configuration. The 363-ball package can appear thermally symmetric on a schematic but may not distribute heat uniformly in a real assembly. Spread high-utilization logic across the die when practical, avoid concentrating resource use beneath a poorly cooled area, and validate the final thermal design in an assembled board.
Preserve clock integrity with short reference-clock routing, controlled impedance, appropriate return paths, and isolation from high-swinging I/O. Apply device-specific timing constraints for every interface and review source-synchronous and chip-to-chip paths after placement. Although all listed alternatives use the same package family, suffix changes and speed-grade changes still require complete timing closure rather than a pin substitution alone.
Do not treat all XC4VFX12 suffix variants as automatically interchangeable. Check the speed grade, temperature designation, substrate or package suffix, configuration behavior, and ordering code against the official device table. For an end-of-life replacement, also verify bitstream compatibility, supply sequencing, memory interfaces, and whether the sourced component’s condition meets the system’s inspection requirements.
Thông tin tuân thủ
The exact lot declarations were not identified. The industrial suffix does not by itself establish AEC-Q100 qualification. Obtain current environmental and material compliance documentation for the quoted manufacturer, condition, and lot.