XC4VFX20-10FFG672I - 19,224-Cell Virtex-4 FX FPGA | AMD
MPN: XC4VFX20-10FFG672I ✓ Hoạt độngXC4VFX20-10FFG672I Tóm tắt
An FPGA is a semiconductor whose digital logic, interconnect, and memory blocks are configured after manufacture. Within the product hierarchy, a field-programmable gate array belongs to programmable logic devices and sits above basic logic cells while providing system integration through programmable I/O, embedded processors, DSP blocks, and dedicated memory. The Virtex-4 FX architecture combines these resources on one CMOS device for parallel processing, protocol bridging, control, and signal conditioning.
Principal resources include 2,136 logic blocks, 19,224 logic cells, 320 I/O, and 1,253,376 RAM bits. The part is manufactured in a 90 nm CMOS process and operates from a 1.2 V core supply. The -10 designation identifies its performance grade, while the I suffix identifies the industrial-temperature option. The reported junction-temperature range for the G672I version is -40°C to +100°C.
The architecture supports parallel datapaths instead of executing instructions sequentially, making it suitable where throughput, deterministic latency, or multiple simultaneous interfaces matter. Its 19,224-cell resource count is substantially larger than a small microcontroller, while its 320 I/O positions allow extensive connection to external memories, transceivers, converters, clocks, and application-specific interfaces. Embedded block RAM reduces external-memory traffic when the working set fits the available RAM.
Typical uses include industrial control and automation, telecommunications and network-interface equipment, video processing, instrumentation, test systems, and embedded signal-processing platforms. The large FCBGA package provides extensive I/O capacity but requires a fine-pitch PCB layout with careful power distribution, decoupling, thermal management, and high-speed routing discipline.
Designers should verify the complete pin list, supported I/O standards, configuration interface, clock requirements, supply sequencing, and exposed thermal behavior against the manufacturer datasheet before layout release. Board-level signal integrity and FPGA timing closure are particularly important when the device drives memory, clocks, or high-speed serial interfaces through a 672-pin package.
This page combines the device’s core logic, memory, I/O, package, temperature-grade, and lifecycle information with practical replacement guidance, comparison criteria, and design notes. It focuses on engineering decisions engineers must make when integrating this large Virtex-4 FX FPGA into a constrained, multi-rail, high-pin-count system.
Bộ thay thế dễ dàng lắp đặt cho XC4VFX20-10FFG672I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC4VFX20-10FFG672I (cùng hình factor và footprint) — khác nhau ở Logic Family, Core Supply Voltage, Internal Frequency, Logic Blocks, Mounting Type.
XC4VFX20-10FF672I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC4VFX20-10FFG672C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC4VFX20-9FFG672I
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC4VFX20-8FFG672I
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC4VFX20-12FFG672I
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC4VFX20-10FFG672I Tỷ lệ tối đa & tính chất điện
| Product Type | Virtex-4 FX field-programmable gate array (FPGA) |
| Logic Cells | 19,224 cells |
| Logic Blocks | 2,136 LABs/CLBs |
| Adaptive Logic Modules | 8,544 ALMs |
| Embedded RAM | 1,253,376 bits |
| User I/O | 320 I/O |
| Package Pins | 672 pins |
| Package Type | FCBGA-672, 27 x 27 mm |
| Kiểu lắp đặt | Surface-mount (SMD) |
| Internal Frequency | 1,028 MHz |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -10 |
| Nhiệt độ hoạt động | -40°C to +100°C junction temperature |
| Logic Family | CMOS |
| Trạng thái vòng đời | Active |
| RoHS Details | Available in the manufacturer product record |
Hướng dẫn cấu hình chân XC4VFX20-10FFG672I fcbga-672, 27 x 27 mm
Cấu hình chân cho XC4VFX20-10FFG672I (fcbga-672, 27 x 27 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC4VFX20-10FFG672I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC4VFX20-10FFG672I phù hợp cho 6 Áp dụngs: Industrial Automation and Control, Telecommunications Interface Equipment, Video and Image Processing, Precision Instrumentation and Test Systems, Embedded Signal Processing, Network Packet Processing.
Industrial Automation and Control
The XC4VFX20-10FFG672I fits industrial controllers that coordinate multiple machine functions, sensor inputs, and actuator outputs through deterministic parallel logic. Its 19,224 logic cells and 2,136 logic blocks allow control pipelines to run concurrently, while 320 user I/O provide connections to fieldbus transceivers, isolated digital interfaces, encoders, and motor-control peripherals. The 1,253,376 RAM bits can buffer protocol frames and diagnostic histories without continuous external-memory traffic. In a production platform, the -40°C to +100°C junction-temperature option is preferable for wider industrial environments. Layout should reserve clean power planes and short decoupling paths for the 672-ball FCBGA, while thermal analysis should use realistic switching activity rather than an idle-device estimate.
Được đề xuất
Telecommunications Interface Equipment
The XC4VFX20-10FFG672I suits telecommunications interface equipment requiring multiple wide data paths, packet buffering, clocking, and protocol termination. Its 19,224 logic cells can support parallel packet classification, traffic shaping, and interface adaptation, while the FPGA fabric can implement multiple concurrent operations instead of a single sequential instruction stream. The available 1,253,376 RAM bits provide distributed buffering for line-rate state and packet metadata. With 320 user I/O, the device can connect directly to high-speed transceivers, network processors, and parallel memory interfaces. The -10 grade supports demanding timing while the 672-pin FCBGA demands careful package escape routing, length matching, split supply planes, and verified clock-tree implementation for reliable telecommunications operation.
Được đề xuất
Video and Image Processing
The XC4VFX20-10FFG672I can support parallel video and image-processing functions that benefit from simultaneous pixel operations. Its 19,224 logic cells provide configurable logic for format conversion, timing control, filtering, and data movement, while 1,253,376 RAM bits can support line buffers, frame queues, and lookup structures. The 320 user I/O allow connection to parallel image sensors, frame-capture devices, memory components, and display controllers. Compared with a sequential processor, the FPGA fabric can execute several pipeline stages concurrently and maintain predictable latency when clocks and memory interfaces are designed carefully. A 672-ball FCBGA implementation should account for high pin count, signal integrity on wide buses, supply-noise isolation, and the thermal load caused by switching activity in wide parallel datapaths.
Được đề xuất
Precision Instrumentation and Test Systems
The XC4VFX20-10FFG672I fits instrumentation and test systems that must combine acquisition control, timing, protocol management, and real-time processing. Programmable logic can implement parallel counters, trigger logic, calibration tables, and interface state machines, while the embedded RAM supports captured waveforms and configuration data. Its 320 I/O positions reduce the need for external glue logic when connecting converters, memories, clock sources, and communication transceivers. The 19,224-cell device can also host multiple measurement channels or concurrent control loops with deterministic FPGA timing. For laboratory or production test equipment, use the manufacturer pinout to assign configuration and JTAG access correctly, and perform signal-integrity analysis on every high-speed memory or converter interface before finalizing the 672-ball layout.
Được đề xuất
Embedded Signal Processing
The XC4VFX20-10FFG672I is appropriate for embedded signal-processing systems that need configurable parallel filters, transforms, correlation, modulation, or interface conditioning. Its logic fabric can sustain multiple concurrent datapaths, and the 1,253,376 RAM bits provide storage for coefficients, sample histories, and intermediate results. The -10 speed grade offers a timing-focused option when external interfaces require predictable operation, while 320 user I/O support converters, memory, and clocking resources. Unlike a processor-only implementation, this FPGA can place acquisition, filtering, and output stages in one configurable pipeline. The design should use synchronous interfaces wherever possible, constrain every high-speed path, and include decoupling close to the package power balls to minimize supply disturbance during dense switching activity.
Được đề xuất
Network Packet Processing
The XC4VFX20-10FFG672I can implement network packet-processing functions directly in programmable logic, including classification, header parsing, filtering, aggregation, and traffic shaping. Its 19,224 logic cells allow several pipeline stages to operate concurrently, and 1,253,376 RAM bits can support packet buffers, lookup tables, and queue metadata. The 320 user I/O permit direct connection to parallel PHY interfaces, network processors, and external memories when suitable board-level standards are implemented. This architecture is attractive when deterministic latency or line-rate parallel operation is more important than software flexibility. A successful design must align buffering boundaries with the selected interface protocol, constrain timing for internal RAM and registers, and verify the 672-ball package escape-routing geometry before fabrication.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC4VFX20-10FFG672I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC4VFX20-10FF672I | XC4VFX20-10FFG672C | XC4VFX20-9FFG672I | XC4VFX20-8FFG672I | XC4VFX20-12FFG672I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FCBGA-672 (27 x 27 mm) | FCBGA-672 | FBGA-672 | FCBGA-672 | FCBGA-672 | FCBGA-672 |
| Logic Cells | 19,224 cells | 19,224 cells | 19,224 cells | 19,224 cells | 19,224 cells | 19,224 cells |
| Total RAM | 1,253,376 bits | 1,253,376 bits | 1,253,376 bits | 1,253,376 bits | 1,253,376 bits | 1,253,376 bits |
| User I/O | 320 I/O | 320 I/O | 320 I/O | 320 I/O | 320 I/O | 320 I/O |
| Speed Grade | -10 | -10 | -10 | -9 | -8 | -12 |
| Temperature Grade | Industrial: -40°C to +100°C junction temperature | Industrial suffix I | Commercial suffix C | Industrial suffix I | Industrial suffix I | Industrial suffix I |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
Bảo phân biệt quan trọng
- Substantial parallel processing capacity for a 672-ball design (vsXC4VLX15-10FF676I)
- Industrial temperature option with the same -10 performance grade (vsXC4VFX20-10FFG672C)
- Closest documented suffix alternative retains identical core resources (vsXC4VFX20-10FF672I)
- Higher performance upgrade path within the same device family (vsXC4VFX20-8FFG672I)
Ghi chú thiết kế
Treat the 672-ball FCBGA as a high-speed, multi-supply design rather than a conventional low-pin-count IC layout. Place the required input, output, and bulk-decoupling capacitors directly at their associated package balls; keep the high-frequency return path continuous through every supply plane. Use the manufacturer ball map to identify dedicated configuration, clock, and reference pins before assigning user I/O. Confirm PCB design rules for ball pitch, solder-mask definition, thermal-via arrays, and assembly capability with the selected fabricator.
Estimated: junction-temperature rise equals package thermal resistance multiplied by total FPGA dissipation. For example, a design dissipating 4 W with an effective 10°C/W system thermal resistance produces an estimated 40°C rise above ambient. These values are design estimates, not device specifications. Actual dissipation depends heavily on configuration, clocking, I/O activity, and power supply, so obtain power data from the FPGA power-analysis tool and confirm the final junction temperature against the -40°C to +100°C operating range.
Constrain clock, chip-select, byte-lane, and other source-synchronous interfaces using the supported timing methodology rather than relying on nominal clock frequency alone. Maintain continuous reference-plane return paths beneath high-speed routes, avoid plane splits beneath I/O networks, and apply length matching where the external interface requires it. The 1,028 MHz internal-frequency figure is not permission to use uncontrolled PCB routing; external interface timing is governed by the selected I/O standard, data rate, board topology, and device timing constraints.
Do not approve a substitution based only on the 672-ball package name. Compare the exact ordering suffix, speed grade, temperature grade, configuration pins, power balls, exposed-pad requirements, and the manufacturer pin-description table. The XC4VFX20-10FF672I and XC4VFX20-10FFG672C are close options, but suffix changes can alter temperature grade or ordering requirements. Also avoid confusing the 320 user I/O count with 672 physical package balls, since the latter also includes power, ground, clock, configuration, and other fixed functions.
Separate core and I/O supply planning because the device operates from a 1.2 V core while external interfaces may require other rails. Verify sequencing and ramp limits from the Virtex-4 FX power guidelines, then size supply droop for simultaneous switching rather than average current alone. Place bulk energy storage near the package and distribute high-current connections across multiple supply and ground balls as directed by the pinout. Monitor configuration-current behavior separately because startup can create a distinct transient.
Thông tin tuân thủ
The target is an industrial-temperature FPGA rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not explicitly established for the exact ordering code.