XC4VFX60-11FF672C - 56,880 Logic Cells FPGA | AMD
MPN: XC4VFX60-11FF672C ✗ Cuối đờiXC4VFX60-11FF672C Tóm tắt
A field-programmable gate array is a semiconductor device whose digital logic, interfaces, and other configurable circuits are programmed after manufacture. Within the FPGA hierarchy, the Virtex-4 FX platform combines programmable logic, block RAM, DSP resources, and high-speed serial connectivity in one device. This combination allows complete digital subsystems to be integrated on a single FPGA rather than assembled from separate programmable and fixed-function components.
The XC4VFX60 provides 6,320 configurable logic blocks and 56,880 logic cells. Its -11 designation identifies the device performance grade, while the FF672 package exposes 352 user input/output positions according to the manufacturer listing. SelectIO resources support multiple standards, and the device includes LVCMOS drive-strength options of 2, 4, 6, 8, 12, or 16 mA. These resources support communication, control, storage, and specialized signal-processing interfaces.
The FPGA is built on 90 nm CMOS and operates around a nominal 1.2 V supply. Its family architecture includes logic cells, block RAM, DSP48 processing elements, and high-speed serial transceiver resources. A maximum clock frequency of 1,181 MHz is reported for this device family, while exact timing limits remain design- and tool-version-dependent. Designers should use the Virtex-4 timing models and implementation tools for final sign-off rather than treating the maximum figure as a guaranteed operating frequency.
Typical applications include industrial control, test and measurement, communications infrastructure, high-speed data acquisition, signal processing, and embedded systems. The integrated DSP and memory resources allow filters, transforms, packet processing, and control logic to share one programmable platform. The large I/O count also makes the device useful for parallel interfaces, custom accelerator boards, and legacy system expansions requiring a high pin count.
Implementation requires a 672-ball PCB footprint with careful power, ground, decoupling, and high-speed routing. The exposed package demands a thermal strategy appropriate to the board stack-up and enclosure. Differential and high-speed signals require controlled impedance, while unused inputs must be connected according to the Virtex-4 design guidelines. Configuration, clocking, power sequencing, and JTAG debugging must follow the family architecture documentation.
This page combines device specifications, same-package alternatives, application guidance, comparison parameters, and practical PCB considerations. The alternatives are distinguished by temperature grade, speed grade, or ordering code rather than by functional equivalence. Engineers should confirm package markings, timing behavior, temperature requirements, and bitstream compatibility before approving any substitution.
Bộ thay thế dễ dàng lắp đặt cho XC4VFX60-11FF672C — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC4VFX60-11FF672C (cùng hình factor và footprint) — khác nhau ở Configurable Logic Blocks, Device Type, Logic Cells, Speed Grade, AEC-Q100 Qualification.
XC4VFX60-11FF672I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC4VFX60-11FFG672C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC4VFX60-11FF672IS1
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC4VFX60-10FF672C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC4VFX60-10FFG672C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC4VFX60-11FF672C Tỷ lệ tối đa & tính chất điện
| Device Type | Virtex-4 FX field-programmable gate array |
| Logic Cells | 56,880 cells |
| Configurable Logic Blocks | 6,320 CLBs |
| Tần số xung maksimum | 1,181 MHz |
| Combinatorial Delay | 0.17 ns per CLB |
| Process Technology | 90 nm CMOS |
| Nominal Core Supply Voltage | 1.2 V |
| Speed Grade | -11 |
| Hộp | 672-pin FCBGA |
| User I/O | 352 I/O |
| LVCMOS Drive Strengths | 2, 4, 6, 8, 12, or 16 mA |
| Device Family | Virtex-4 FX |
| Kiểu lắp đặt | Surface mount |
| Trạng thái RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
Hướng dẫn cấu hình chân XC4VFX60-11FF672C 672-pin fcbga
Cấu hình chân cho XC4VFX60-11FF672C (672-pin fcbga gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC4VFX60-11FF672C.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC4VFX60-11FF672C phù hợp cho 6 Áp dụngs: Industrial Control Systems, Telecommunications and Network Interfaces, Digital Signal Processing, Test and Measurement Equipment, High-Speed Data Acquisition, Embedded Processing and Control.
Industrial Control Systems
The AMD XC4VFX60-11FF672C fits industrial controllers that combine deterministic control logic, data acquisition, communications, and supervisory processing in one programmable device. Its 56,880 logic cells and 6,320 configurable logic blocks provide substantial capacity for state machines, motion control, interlocks, and protocol handling, while the 672-ball package exposes 352 user I/O positions for field-bus, digital I/O, analog-interface control, and sensor interfaces. The -11 speed grade supports demanding control-clock targets, and block RAM can buffer samples or trace data without external memory. For an industrial design, the XC4VFX60-11FF672I is preferable when the enclosure can exceed the commercial temperature range. Final operation should be checked against the -11 timing limits, and the PCB must provide dense core decoupling, careful ground-plane partitioning, and robust power sequencing.
Được đề xuất
Telecommunications and Network Interfaces
The AMD XC4VFX60-11FF672C is suitable for telecommunications equipment requiring parallel data paths, packet processing, buffering, and multiple external interfaces. Its large programmable fabric can implement protocol state machines, traffic classifiers, and backplane interfaces, while dedicated serial resources can support high-speed links when enabled through the appropriate design configuration. The 352 user I/O positions allow parallel Ethernet, ATM, storage, or custom backplane interfaces to be consolidated on one device, and block RAM supports packet queues and timing buffers. Because the FF672 package requires a dense multilayer PCB, engineers should preserve short return paths for high-speed interfaces and separate sensitive clock routing from data buses. The -10 alternatives are pin-compatible, but their lower speed grade can invalidate an existing -11 timing closure. The final design should therefore be reimplemented and statically timed after any replacement.
Được đề xuất
Digital Signal Processing
The AMD XC4VFX60-11FF672C fits signal-processing systems that need programmable arithmetic alongside extensive control logic. DSP48 resources and block RAM can implement filters, correlators, transforms, decimators, and fixed-point pipelines, while 56,880 logic cells accommodate interfaces, scheduling, channelization, and status reporting. The reported 1,181 MHz maximum clock frequency provides a useful family-level ceiling, but practical throughput depends on arithmetic width, DSP cascade requirements, routing congestion, and the selected -11 timing constraints. For a high-performance acquisition card, the device can combine sensor capture, digital correction, spectral processing, and data transfer on a single FPGA. Place input and clock circuitry close to their assigned balls, keep decoupling symmetrical around the device, and use controlled-impedance routing for high-speed sample buses. Resource utilization and maximum operating frequency should be confirmed with the Virtex-4 implementation environment before schematic freeze.
Được đề xuất
Test and Measurement Equipment
The AMD XC4VFX60-11FF672C is well matched to test and measurement instruments that need flexible timing, parallel capture, pattern generation, and real-time analysis. Its programmable fabric can coordinate instruments, synthesize test vectors, manage acquisition pipelines, and implement protocol-specific logic, while the high pin count supports parallel DUT connections and wide data buses. A combination of block RAM, DSP resources, and the -11 speed grade permits reusable FPGA-based test platforms to cover communications, semiconductor, and industrial DUTs without fixed-function silicon. The 672-ball package demands careful ball-grid fanout and layer transitions, so PCB planning should begin with escape routing and power delivery rather than after schematic completion. Keep clocks and differential pairs controlled, provide substantial ground planes, and verify thermal performance under sustained acquisition workloads. When replacing the device with a -10 grade, repeat timing analysis because acquisition-clock and I/O margins may change even though the package is unchanged.
Được đề xuất
High-Speed Data Acquisition
The AMD XC4VFX60-11FF672C supports high-speed data-acquisition designs where acquisition, buffering, processing, and output must operate concurrently. Its 352 user I/O positions can interface with parallel ADC and DAC components, while DSP48 resources perform real-time filtering and block RAM stores sample windows or trigger records. The -11 speed grade provides more timing margin than the -10 alternatives, making it preferable when source-synchronous interfaces or tightly constrained clock domains are central to the design. Pin assignment should group acquisition buses by data rate, and PCB signal integrity depends on matched length, uninterrupted reference planes, and appropriate via transitions. The 672-ball device also requires a thermal design sized for sustained conversion and transfer activity rather than idle power alone. Engineers should model package and board power in the Virtex-4 power-estimation tool, validate rail sequencing during startup, and verify the selected device against all acquisition-interface timing constraints.
Được đề xuất
Embedded Processing and Control
The AMD XC4VFX60-11FF672C can implement an embedded processor subsystem together with dedicated hardware accelerators and peripheral logic. Its 56,880 logic cells support one or more soft processor cores, boot code, interrupt handling, memory interfaces, and application-specific control, while DSP48 and block RAM resources handle workloads that would otherwise require external accelerators. This heterogeneous mix is useful in embedded controllers, protocol gateways, and adaptable industrial modules where firmware-like flexibility and deterministic hardware behavior must coexist. The 672-pin package provides substantial external connectivity but creates a demanding ball-grid escape and power-distribution problem, so layer planning and decoupling placement are critical. The XC4VFX60-11FF672I is the appropriate same-package option when industrial-temperature operation is required. Because this legacy family relies on established FPGA toolchains, engineers should preserve a reproducible bitstream generation flow and validate replacement parts for processor timing, peripheral timing, and configuration behavior.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC4VFX60-11FF672C — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC4VFX60-11FF672I | XC4VFX60-11FFG672C | XC4VFX60-11FF672IS1 | XC4VFX60-10FF672C | XC4VFX60-10FFG672C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 672-pin FCBGA | 672-pin FCBGA | 672-pin FCBGA | 672-pin FCBGA | 672-pin FCBGA | 672-pin FCBGA |
| Logic Cells | 56,880 cells | 56,880 cells | 56,880 cells | 56,880 cells | 56,880 cells | 56,880 cells |
| Configurable Logic Blocks | 6,320 CLBs | 6,320 CLBs | 6,320 CLBs | 6,320 CLBs | 6,320 CLBs | 6,320 CLBs |
| Speed Grade | -11 | -11 | -11 | -11 | -10 | -10 |
| User I/O | 352 I/O | 352 I/O | 352 I/O | 352 I/O | 352 I/O | 352 I/O |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage | 1.2 V nominal | 1.14 V to 1.26 V | 1.2 V nominal | 1.14 V to 1.26 V | 1.2 V nominal | 1.2 V nominal |
Bảo phân biệt quan trọng
- Maintains the -11 performance grade (vsXC4VFX60-10FF672C)
- Commercial ordering configuration (vsXC4VFX60-11FF672I)
- Matches the -11 grade without the G ordering-code variant (vsXC4VFX60-11FFG672C)
Ghi chú thiết kế
The 672-ball FCBGA requires multilayer escape routing, uninterrupted reference planes, and dense core and auxiliary decoupling. Place the smallest available capacitors directly across the relevant supply balls, distribute them across all four sides of the device, and keep via transitions symmetrical. Confirm the final ball map against the Virtex-4 Packaging and Pinout Specification because FF672 assignments must not be copied from another package.
Thermal performance depends on the board stack-up, copper area, airflow, and adjacent heat sources. Use the package thermal data and a board-level power estimate to determine whether the 672-ball device requires a heat spreader, exposed thermal balls, or chassis airflow. Estimated: if calculated FPGA dissipation is 8 W, a 1.0 C/W system thermal resistance would produce an 8 C rise; validate that assumption against the actual board construction before release.
Treat clocks, source-synchronous interfaces, and serial links as controlled-impedance routes with continuous reference planes. Match data and strobe signals according to the selected interface standard, avoid stubs, and keep switching current loops small. The advertised LVCMOS drive strengths of 2, 4, 6, 8, 12, or 16 mA should be selected only after evaluating edge rate, EMI, power, and receiver loading rather than driving every output at maximum strength.
Implement the recommended power-up and power-down sequence for core and auxiliary rails, and provide independent current limiting or sequencing where the family architecture requires it. The nominal 1.2 V core is not the voltage for every supply rail; use the device power specification to determine core, auxiliary, and I/O requirements. Validate startup across temperature and load because sequencing errors can stress configuration logic even when steady-state voltage is correct.
Thông tin tuân thủ
The manufacturer listing does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for this legacy ordering code. AEC-Q100 is not applicable to the commercial FPGA ordering code.