XC4VLX15-11FFG668C - 13,824-Cell Virtex-4 FPGA | AMD
MPN: XC4VLX15-11FFG668C ✗ Cuối đờiXC4VLX15-11FFG668C Tóm tắt
A field-programmable gate array is a semiconductor device whose digital functionality is configured after fabrication. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic blocks, programmable interconnect, block memory, dedicated input/output resources, and other fixed functions on one integrated circuit. This allows engineers to implement and revise complex circuits without fabricating a custom ASIC. The Virtex-4 LX family is AMD Xilinx's general-purpose FPGA architecture, while the FFG668 option places the device in a large 27 mm by 27 mm flip-chip ball grid array.
Key resources include 13,824 logic cells organized into 1,536 configurable logic modules, 320 I/O terminals, and a 668-package footprint. The advertised maximum frequency is 1,205 MHz, although practical performance also depends on the selected logic path, speed grade, external memory, routing congestion, and timing constraints. The XC4VLX15-11FFG668C is identified as a commercial-grade component with a 0°C to 85°C operating-temperature range. Its lead-free FCBGA construction supports compact, high-density board-level integration when the PCB has suitable escape routing, power delivery, and thermal design.
The architecture is appropriate for parallel data processing, protocol termination, control-plane logic, test instrumentation, and embedded systems that need configurable hardware rather than a fixed function ASIC. Its 320 I/O terminals provide substantial connectivity for parallel buses, memory interfaces, clocks, and control signals. Designers must still base timing closure on the specific pin assignment and external circuit, because advertised device frequency does not guarantee the same frequency for every implemented design. Configuration storage, programming interfaces, power rails, decoupling, and JTAG access also require board-level implementation.
Typical uses include industrial automation, communications infrastructure, instrumentation, defense and aerospace systems, high-speed interface bridging, and programmable signal-processing platforms. The large logic-cell count supports designs requiring multiple parallel channels, moderate on-chip buffering, or soft-processor-based control. For designs migrating from smaller FPGAs, the device can provide additional routing and I/O capacity while preserving a familiar programmable-logic workflow through AMD/Xilinx design tools.
A critical implementation consideration is the 668-ball package. Its fine ball pitch requires careful PCB stack-up selection, via-in-pad or microvia planning, fanout routing, and assembly-process qualification. Follow the manufacturer's package pinout files and recommended land-pattern guidance when assigning balls. Power and ground distribution must also meet the device's simultaneous switching requirements; otherwise, high-activity designs may encounter voltage integrity or signal-integrity problems despite satisfactory logic timing.
This product page combines device specifications, package guidance, application analysis, drop-in alternatives, and design-oriented comparisons. These engineering details help teams evaluate whether the XC4VLX15-11FFG668C provides the required logic, I/O, speed grade, package, and temperature capability before beginning schematic capture, PCB layout, and FPGA configuration.
Bộ thay thế dễ dàng lắp đặt cho XC4VLX15-11FFG668C — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC4VLX15-11FFG668C (cùng hình factor và footprint) — khác nhau ở Package Type, Device Type, Logic Cells, Package, Speed Grade.
XC4VLX15-11FFG668I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC4VLX15-10FFG668C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC4VLX15-11FFG668CS2
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC4VLX15-10FFG668I
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC4VLX15-12FFG668C
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC4VLX15-11FFG668C Tỷ lệ tối đa & tính chất điện
| Device Type | Virtex-4 LX Field Programmable Gate Array |
| Logic Cells | 13,824 cells |
| Configurable Logic Modules | 1,536 CLBs |
| I/O Count | 320 terminals |
| Điện áp cung cấp | 1.2 V |
| Process Technology | 90 nm CMOS |
| Speed Grade | 11 |
| Temperature Grade | Commercial |
| Minimum Operating Temperature | 0°C |
| Maximum Operating Temperature | 85°C |
| Tần số xung maksimum | 1,205 MHz |
| Combinatorial Delay | 0.17 ns |
| Package Type | 668-ball FCBGA |
| Package Dimensions | 27 mm × 27 mm |
| Ball Pitch | 1.00 mm |
| Terminals on Bottom | 668 terminals |
| Lead-Free Construction | Yes |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân XC4VLX15-11FFG668C 27 mm × 27 mm
Cấu hình chân cho XC4VLX15-11FFG668C (27 mm × 27 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC4VLX15-11FFG668C.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC4VLX15-11FFG668C phù hợp cho 6 Áp dụngs: Industrial Automation Controller, Communications Interface Bridge, Programmable Signal Processing, Test and Measurement Instrumentation, Aerospace and Defense Control Logic, Embedded Control Platform.
Industrial Automation Controller
The XC4VLX15-11FFG668C fits industrial automation controllers that coordinate sensors, actuators, interlocks, and real-time control logic. Its 13,824 logic cells provide capacity for parallel state machines, protocol handling, motion-control sequencing, and supervisory functions, while 320 I/O terminals support field-bus interfaces, digital I/O, clocks, and fault signals. The commercial 0°C to 85°C range is appropriate for controlled indoor equipment. Designers should use the AMD Virtex-4 package pinout files to assign all 668 balls and should budget PCB escape routing, supply decoupling, and thermal spreading around the large 27 mm by 27 mm FCBGA.
Được đề xuất
Communications Interface Bridge
The XC4VLX15-11FFG668C can bridge parallel and serial communications domains by combining configurable logic, dedicated I/O, and programmable data paths on one device. Its 1,536 CLBs provide enough parallel resources for packet classification, buffering, clock-domain crossing, and protocol conversion, while the 320 I/O terminals accommodate wide data buses and source-synchronous interfaces. The 1.2 V core requirement makes careful rail planning essential alongside I/O voltage selection. Timing closure must be demonstrated in the actual design rather than inferred solely from the advertised 1,205 MHz maximum frequency, particularly when line-rate interfaces and external memories constrain routing.
Được đề xuất
Programmable Signal Processing
The XC4VLX15-11FFG668C is appropriate for parallel filtering, data acquisition, and fixed-function signal-processing implementations that benefit from reconfigurable hardware. Its 13,824 logic cells can be partitioned into parallel arithmetic, correlation, control, or digital-filter pipelines, and the 320 I/O terminals simplify connection to converters, memory, and acquisition systems. Designers should assess pipeline depth against timing closure at the grade-11 speed class and avoid treating the 1,205 MHz device-level figure as guaranteed pipeline performance. Synchronous design practices, registered I/O paths, and controlled clock distribution are recommended to preserve deterministic behavior.
Được đề xuất
Test and Measurement Instrumentation
The XC4VLX15-11FFG668C supports programmable measurement systems in which sequencing, acquisition control, calibration, and result processing benefit from reconfigurable logic. The device can implement multiple parallel channels, test-pattern generation, trigger logic, and interface management while providing 320 I/O terminals for converters and peripherals. Its 0°C to 85°C commercial range suits laboratory and production equipment with controlled environments. For high-density fanout, use the manufacturer's package and pinout documentation, validate the PCB stack-up against the 1.00 mm ball pitch, and include adequate power and ground planes for predictable performance.
Được đề xuất
Aerospace and Defense Control Logic
The XC4VLX15-11FFG668C can be evaluated for legacy aerospace, defense, and mission-control logic where an established Virtex-4 design already targets this exact device. Its 320 I/O terminals and 13,824 logic cells support supervisory control, telemetry formatting, redundant sequencing, and embedded state-machine networks. The target is a commercial-grade, 0°C to 85°C component; mission applications normally require an appropriate temperature grade and formal qualification process rather than assumption of suitability. Any substitution should compare exact package balls, timing, radiation, temperature, configuration, and qualification requirements, with implementation approval governed by the applicable program specifications.
Được đề xuất
Embedded Control Platform
The XC4VLX15-11FFG668C is well suited to embedded control platforms that combine hard real-time sequencing with programmable peripherals. Designers can use configurable logic for hardware-assisted control, custom peripherals, bus arbitration, and monitoring functions, and can pair the FPGA with external memory or processors when the application exceeds the on-chip device capacity. The 320 I/O terminals simplify expansion, but the implementation must account for the 668-ball package during assembly and routing. Validate configuration startup, JTAG access, clock integrity, and power sequencing early in the design, then confirm all timing paths with post-route analysis.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC4VLX15-11FFG668C — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC4VLX15-11FFG668I | XC4VLX15-10FFG668C | XC4VLX15-11FFG668CS2 | XC4VLX15-10FFG668I | XC4VLX15-12FFG668C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 668-BBGA FCBGA | 668-BBGA FCBGA - same | 668-BBGA FCBGA - same | 668-BBGA FCBGA - same | 668-BBGA FCBGA - same | 668-BBGA FCBGA - same |
| FPGA Family | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX |
| Logic Cells | 13,824 cells | 13,824 cells | 13,824 cells | 13,824 cells | 13,824 cells | 13,824 cells |
| I/O Count | 320 terminals | 320 terminals | 320 terminals | 320 terminals | 320 terminals | 320 terminals |
| Speed Grade | Grade 11 | Grade 11 | Grade 10 | Grade 11 | Grade 10 | Grade 12 |
| Temperature Grade | Commercial, 0°C to 85°C | Industrial | Commercial | Industrial | Industrial | Commercial |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
Bảo phân biệt quan trọng
- Maintains grade-11 performance with an industrial-grade package option (vsXC4VLX15-10FFG668C)
- Preserves the complete 320-terminal I/O interface (vsXC4VLX15-12FFG668C)
- Combines 13,824 logic cells with a 1.2 V core supply (vsXC4VLX15-10FFG668I)
Ghi chú thiết kế
The 668-ball FCBGA uses a 1.00 mm ball pitch, so PCB escape routing is a first-order design constraint. Follow AMD's package pinout files and recommended land-pattern guidance before assigning signals. Select a stack-up that supports the required escape strategy, maintain adequate ball-to-via clearances, and plan layer transitions early. Do not route directly from fine-pitch balls to a conventional coarse-pitch footprint without confirming that the manufacturing process can achieve the required density and inspection criteria.
Design the 1.2 V core rail for the worst-case combination of resource use and switching activity rather than a nominal idle condition. Use the manufacturer's power-estimation workflow with the actual design and include margin for temperature and supply tolerance. Place bulk and high-frequency decoupling according to the recommended power architecture, use multiple power and ground connections where the package assigns them, and verify the assembled board with rail-noise measurements under maximum switching load.
A large BGA can concentrate heat even though the device uses 90 nm CMOS. Preserve continuous ground-plane area beneath and around the package, avoid thermal isolation by split planes, and use the manufacturer's thermal data for junction-temperature calculations. The final thermal solution may require copper spreading, board-area utilization, forced airflow, or a heat-spreading structure. Temperature sensors or system monitoring should be considered where mission-critical reliability requires direct observation of board or junction conditions.
Do not treat the advertised 1,205 MHz maximum frequency as a guaranteed operating frequency for an arbitrary design. Timing closure depends on architecture, routing, utilization, pin placement, memory interfaces, and speed grade. Establish timing constraints early, keep high-speed interfaces and clock-sensitive logic away from aggressive switching regions, and run post-route timing analysis with realistic clock uncertainty and I/O timing assumptions before releasing the PCB.
Thông tin tuân thủ
The device is described as a lead-free flip-chip ball grid array. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals status require documentary confirmation.