XC4VSX25-10FF668C - 23,040-Cell Virtex-4 SX FPGA | AMD
MPN: XC4VSX25-10FF668C ✗ Cuối đờiXC4VSX25-10FF668C Tóm tắt
A field-programmable gate array, or FPGA, is a programmable semiconductor containing configurable logic, memory, DSP, clocking, and I/O resources. FPGA belongs to the broader semiconductor hierarchy of programmable logic devices and digital ASICs. Unlike a fixed-function ASIC, an FPGA allows design logic, interfaces, and signal-processing pipelines to be updated after manufacture, shortening development cycles for communications, control, test, and instrumentation equipment.
The XC4VSX25-10FF668C combines 23,040 logic cells with 320 I/O in one high-pin-count FCBGA package. Its Virtex-4 SX architecture includes XtremeDSP processing resources for filtering, transforms, and real-time signal processing. The 1,028 MHz internal-frequency figure represents the device's stated operating range rather than a guarantee that every user design or I/O path will run at that rate; actual performance depends on logic depth, clocking, routing, and timing constraints.
The 668-pin FCBGA package supports high I/O density, which makes the device useful for parallel interfaces, multi-channel data acquisition, custom communication links, and video or control systems that cannot fit into a lower-pin-count package. The 0°C to 85°C commercial-temperature range suits laboratory, industrial, and indoor equipment. Because the FF package designation does not carry the G lead-free terminal-finish code, the XC4VSX25-10FFG668C is the lead-free equivalent identified for this device family.
Typical uses include telecommunications line cards, industrial control systems, radar and test equipment, high-speed data converters, digital filtering, and embedded signal-processing platforms. A Virtex-4 SX design can consolidate parallel datapaths and DSP functions that would otherwise require multiple programmable devices. Designers should also account for configuration storage, clock distribution, power sequencing, and the large BGA escape-routing requirements of the 668-pin package.
For PCB implementation, follow the AMD package drawing and pinout table for the FF668 variant, including the exposed thermal arrangement and ball-map orientation. Provide multiple low-inductance supply connections and a controlled plane structure, and keep high-speed clock and differential-routing constraints within the device timing rules. Do not mix the FF and FFG package variants in the same library entry without confirming terminal finish, pin mapping, and assembly requirements.
This page brings together package details, replacement options, application guidance, and design cautions that engineers would otherwise assemble from separate part listings and support documents. It also distinguishes the lead-bearing FF668 option from its identified FFG668 lead-free counterpart, helping procurement and assembly teams make a controlled migration decision.
Bộ thay thế dễ dàng lắp đặt cho XC4VSX25-10FF668C — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC4VSX25-10FF668C (cùng hình factor và footprint) — khác nhau ở Package Type, Device Type, Mounting Type, Speed Grade, RoHS Status.
XC4VSX25-10FFG668C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC4VSX25-10FF668I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC4VSX25-11FFG668I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC4VSX35-10FFG668C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC4VSX35-10FF668C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC4VSX35-10FFG668I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC4VSX25-10FF668C Tỷ lệ tối đa & tính chất điện
| Device Type | Virtex-4 SX field-programmable gate array |
| Logic Cells | 23,040 cells |
| I/O Count | 320 I/O |
| Maximum Internal Frequency | 1,028 MHz |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -10 |
| Package Type | 668-pin FCBGA |
| Package Pin Count | 668 pins |
| Nhiệt độ hoạt động | 0°C to 85°C |
| Architecture | Virtex-4 SX with XtremeDSP resources |
| Terminal Finish | Lead-bearing FF668 variant |
| Lead-Free Equivalent | XC4VSX25-10FFG668C |
| Moisture Sensitivity Level | Level 4 (72 hours) |
| Trạng thái RoHS | Non-compliant for the FF668 terminal-finish variant |
| Device DNA | Unique identifier for design authentication and tracking |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân XC4VSX25-10FF668C 668 pins
Cấu hình chân cho XC4VSX25-10FF668C (668 pins gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC4VSX25-10FF668C.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC4VSX25-10FF668C phù hợp cho 6 Áp dụngs: Digital Signal Processing, Telecommunications Line Cards, Industrial Control Systems, High-Speed Data Acquisition, Test and Measurement Equipment, Embedded Video Processing.
Digital Signal Processing
The XC4VSX25-10FF668C fits real-time filtering, transforms, and fixed-point signal-processing pipelines because its Virtex-4 SX architecture includes XtremeDSP resources and 23,040 logic cells. The 1,028 MHz maximum internal-frequency figure supports pipelined designs that require predictable clocking at elevated rates. Place parallel converter data into the DSP48 resource chains, clock the pipeline synchronously, and constrain all DSP and I/O paths to the selected -10 speed grade. The 320-I/O device also accommodates parallel input and output buses without requiring multiple programmable devices. Verify converter clocking requirements, output latency, and DSP utilization in the implementation tools before fixing the system clock.
Được đề xuất
Telecommunications Line Cards
The XC4VSX25-10FF668C is suitable for telecommunications line-card functions that combine framing, packet control, parallel datapaths, and digital filtering. Its 23,040 logic cells and 320 I/O provide enough connectivity for multi-bit buses and clocked interface logic, while the XtremeDSP resources can implement filters or transforms without relying entirely on general-purpose logic. A practical design places the serial transceiver outputs into parallel DSP chains and then into framing logic. Follow the device's supported I/O standards and external clocking requirements, and maintain timing margin across the specified 0°C to 85°C operating range. This device is appropriate for legacy or long-lifecycle equipment where the mature Virtex-4 SX design flow and established tools are valuable.
Được đề xuất
Industrial Control Systems
The XC4VSX25-10FF668C can implement deterministic machine-control, motion-assist, and industrial data-acquisition logic within its 23,040-cell Virtex-4 SX resource set. The commercial 0°C to 85°C operating range suits controlled indoor environments, while the 320 I/O allow encoder, counter, latch, and interlock signals to be handled in a single programmable device. For a control design, separate timing-critical paths from slower supervisory logic, register external inputs, and use dedicated clocking resources to avoid unpredictable routing delays. Validate every external interface against the FF668 pinout and verify the design's timing margin with production-speed analysis rather than relying only on estimated performance.
Được đề xuất
High-Speed Data Acquisition
The XC4VSX25-10FF668C is appropriate for parallel multi-channel acquisition systems that require substantial I/O bandwidth, on-chip buffering, and real-time processing. Its 320 I/O can accept parallel converter, ADC, or digital-interface outputs, while XtremeDSP resources can apply correction, filtering, or decimation before data transfer. The 1,028 MHz internal-frequency capability supports deeply pipelined data paths when the converter and memory interfaces are implemented with suitable timing constraints. Keep analog and digital return paths separated, use point-to-point routing for high-speed buses, and follow the package's decoupling and power-plane recommendations. Confirm converter aperture timing, output skew, and required data rate against the device I/O timing tables.
Được đề xuất
Test and Measurement Equipment
The XC4VSX25-10FF668C is useful in legacy test and measurement platforms where pattern generation, real-time analysis, timing control, and parallel data capture must share one FPGA. Its 23,040 logic cells and 320 I/O allow multiple instrument channels to be consolidated, and the DSP resources support real-time filtering or spectral-decimation stages. A practical implementation uses dedicated clock resources for deterministic sample timing and registers data immediately after capture. Place input and output interface logic near the corresponding package balls, preserve the stated 0°C to 85°C operating limit, and verify timing against the -10 grade at the slowest applicable corner. For new RoHS-controlled instruments, use the FFG668C terminal-finish variant after assembly review.
Được đề xuất
Embedded Video Processing
The XC4VSX25-10FF668C can support legacy embedded video pipeline functions such as pixel transport, timing generation, frame synchronization, and real-time color or spatial transformations. Its 320 I/O are useful for parallel pixel interfaces, while the DSP resources can implement filters or arithmetic stages between capture and display. The design should use registered pixel boundaries, dedicated clocking, and timing constraints derived from the target video rate and the -10 device speed grade. Keep routing compact by placing interface logic and memory interfaces near their associated I/O regions, and follow the FF668 package's thermal and power-connection requirements. Confirm that the selected external memory interface, video standards, and legacy toolchain remain supported before committing the platform to this device.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC4VSX25-10FF668C — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC4VSX25-10FFG668C | XC4VSX25-10FF668I | XC4VSX25-11FFG668I | XC4VSX35-10FFG668C |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 668-pin FCBGA | 668-pin FCBGA | 668-pin FCBGA | 668-pin FCBGA | 668-pin FCBGA |
| Device Family | Virtex-4 SX | Virtex-4 SX | Virtex-4 SX | Virtex-4 SX | Virtex-4 SX |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Speed Grade | -10 | -10 | -10 | -11 | -10 |
| Temperature Grade | 0°C to 85°C | 0°C to 85°C | Industrial grade | Industrial grade | 0°C to 85°C |
| Terminal Finish | Lead-bearing FF668 finish | Lead-free FFG668 finish | Lead-bearing FF668 finish | Lead-free FFG668 finish | Lead-free FFG668 finish |
Bảo phân biệt quan trọng
- Closest lead-free migration path (vsXC4VSX25-10FFG668C)
- Temperature-grade option without changing the XC4VSX25 basis (vsXC4VSX25-10FF668I)
- Higher speed grade in the same device basis (vsXC4VSX25-11FFG668I)
- Larger resource option for utilization-constrained designs (vsXC4VSX35-10FFG668C)
Ghi chú thiết kế
The 668-pin FCBGA requires a multilayer PCB with short, continuous power and ground planes beneath the device. Follow the AMD FF668 package drawing for via placement, ball-map orientation, and exposed thermal connections. Keep high-speed clock and data routes away from noisy analog or switching-converter return paths, and route configuration signals away from high-speed buses. Validate the stack-up, return paths, and via transitions with field solver analysis before fabrication.
The XC4VSX25-10FF668C uses a 1.2 V core supply, but configuration and I/O interfaces require the complete power architecture defined by the Virtex-4 family documentation. Place bulk and high-frequency decoupling capacitors close to their designated supply and ground balls, use multiple plane connections where recommended, and keep supply sequencing consistent with configuration requirements. Estimated: total dissipation depends on utilization, I/O activity, and ambient temperature, so evaluate the worst switching state rather than relying on a nominal quiescent figure.
A large FCBGA can move heat primarily through its board connections and package thermal features, making the PCB stack-up part of the thermal design. Use the AMD recommended thermal via pattern and maintain copper area under the package where permitted. Estimated: junction temperature should be checked with the package thermal model, PCB thermal resistance, ambient temperature, and the design's actual power dissipation. Use the -10 speed grade and 0°C to 85°C range when evaluating worst-case timing and thermal conditions.
Do not treat FF668 and FFG668 ordering codes as identical without checking the terminal-finish requirement. XC4VSX25-10FFG668C is the identified lead-free equivalent, while XC4VSX25-10FF668I changes the temperature grade. A larger XC4VSX35 device may share the package family but can change resource allocation, timing, power, and configuration expectations. Validate the exact ordering code against the schematic, BOM, package drawing, and programming configuration before releasing a build.
Thông tin tuân thủ
The FF668 terminal-finish variant is identified as RoHS non-compliant because it contains lead. The identified lead-free equivalent is XC4VSX25-10FFG668C. MSL Level 4 is identified as a 72-hour rating.