XC5VLX30T-1FF323I - 30,720-Cell Virtex-5 LXT FPGA | AMD
MPN: XC5VLX30T-1FF323I ✓ Hoạt độngXC5VLX30T-1FF323I Tóm tắt
A field-programmable gate array, or FPGA, is a reconfigurable digital semiconductor whose interconnect and logic functions are defined by a programmable configuration bitstream. The XC5VLX30T belongs to the Virtex-5 LXT product family, a field-programmable logic device within the broader FPGA and programmable-logic hierarchy. Its 30,720-cell architecture supports parallel digital processing, interface termination, protocol bridging, signal conditioning, and embedded control functions.
The device provides 30,720 logic cells organized as 4,800 configurable logic blocks and includes 1,327,104 bits of block RAM. Its 172 user I/O support high connectivity to external memory, transceivers, clocks, and data converters. The listed operating-temperature range is 0°C to 85°C, while the industrial-grade suffix identifies the product as the extended-temperature version of the Virtex-5 LXT family.
The Virtex-5 architecture uses dedicated hardware resources for common signal-processing operations. Selectable I/O standards allow the same FPGA to connect with logic families whose voltage levels and signaling requirements differ. Integrated block RAM reduces external memory demand in designs requiring buffering, packet storage, data acquisition, or wide internal data paths. The 1098 MHz internal figure identifies the device's internal operating capability but does not by itself guarantee that an I/O interface will operate at the same frequency.
Typical applications include industrial network-interface equipment, video and image-processing pipelines, communications infrastructure, instrumentation, storage controllers, and embedded signal-processing systems. The 172 I/O and 1,327,104 RAM bits are especially useful for designs that combine multiple external interfaces with substantial real-time buffering. Because the device is programmable, one board design can support multiple protocol or algorithm revisions without changing the physical FPGA.
PCB design must preserve the exact FCBGA-323 land pattern, power-supply sequencing, and high-speed escape routing required by the device. The manufacturer package pinout resources should be used to assign every ball, including power, ground, configuration, clock, and user I/O functions. Decoupling, thermal management, and configuration memory implementation are as important as logical RTL design because they determine whether an otherwise correct design operates reliably.
This page consolidates package, logic-capacity, memory, temperature, and interface information into a design-oriented view of the XC5VLX30T-1FF323I. It also distinguishes same-footprint alternatives, summarizes their temperature or speed differences, and provides practical guidance for FPGA selection, migration, layout, and qualification without treating package compatibility as proof of complete system equivalence.
Bộ thay thế dễ dàng lắp đặt cho XC5VLX30T-1FF323I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
XC5VLX30T-1FFG323I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC5VLX30T-1FFG323C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC5VLX30T-1FF323C
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC5VLX30T-1FFG323C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC5VLX30T-1FF323I Tỷ lệ tối đa & tính chất điện
| Device Type | Virtex-5 LXT Field-Programmable Gate Array (FPGA) |
| Logic Cells | 30,720 cells |
| Logic Blocks | 2,400 configurable logic blocks |
| Adaptive Logic Modules | 4,800 ALMs |
| Block RAM | 1,327,104 bits |
| User I/O | 172 I/O |
| Internal Frequency | 1098 MHz |
| Core Supply Voltage | 0.95 V to 1.05 V |
| Process Technology | CMOS |
| Hộp | FCBGA-323, 19 mm × 19 mm |
| Total Package Pins | 323 pins |
| Nhiệt độ hoạt động | 0°C to 85°C |
| Architecture | Virtex-5 LXT with second-generation ASMBL architecture |
| Programmable Logic | 30,720-cell CMOS FPGA |
| Embedded Block RAM | 1,327,104 bits |
| Kiểu lắp đặt | Surface Mount |
Hướng dẫn cấu hình chân XC5VLX30T-1FF323I 323 pins
Cấu hình chân cho XC5VLX30T-1FF323I (323 pins gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC5VLX30T-1FF323I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC5VLX30T-1FF323I phù hợp cho 6 Áp dụngs: Industrial Network Interface Equipment, Video and Image Processing, Industrial Control and Instrumentation, Communications Baseband Processing, Data Acquisition Systems, Storage and Interface Controllers.
Industrial Network Interface Equipment
The XC5VLX30T-1FF323I fits network-interface equipment requiring parallel packet processing, multiple I/O standards, and local buffering. Its 30,720 logic cells and 4,800 ALMs can implement protocol engines, arbitration, queue management, and traffic classification, while 1,327,104 bits of block RAM support packet buffering and local data storage. The 172 user I/O provide connectivity for memory, management interfaces, clocks, and physical-layer devices. In a design, use the selectable I/O resources for each interface and keep high-speed routing short. The listed 0°C to 85°C operating range must be checked against the enclosure and the system's required environmental limits.
Được đề xuất
Video and Image Processing
The XC5VLX30T-1FF323I is appropriate for video pipelines that combine pixel-domain processing, frame buffering, and parallel external interfaces. Its 30,720 logic cells can support timing generation, color processing, scaling, filtering, and control logic, while the dedicated DSP resources accelerate multiply-accumulate operations commonly found in scaling and filtering. The 1,327,104 bits of block RAM can hold line or partial-frame data when configured appropriately. Designers should use the manufacturer I/O standards for the selected video interface and constrain timing according to the target pixel rate. External frame memory remains necessary when the design exceeds the internal RAM capacity.
Được đề xuất
Industrial Control and Instrumentation
The XC5VLX30T-1FF323I can serve as the digital control core of industrial instrumentation where acquisition, timing, and data conditioning must be coordinated deterministically. The 172 user I/O can connect sensors, converters, counters, and communication transceivers, while 30,720 logic cells support state machines, filtering, calibration, and supervisory functions. The 1098 MHz internal operating figure provides substantial logic bandwidth, but the actual signal-chain rate depends on routing and I/O constraints. Use synchronous clocking, dedicated clock-capable pins, and registered I/O paths to control timing. The device's listed 0°C to 85°C range should be reconciled with the required factory, field, or laboratory temperature profile.
Được đề xuất
Communications Baseband Processing
The XC5VLX30T-1FF323I is well matched to communications baseband functions that benefit from parallel configurable logic and dedicated multiply-accumulate hardware. Its 4,800 ALMs and DSP resources can implement filters, symbol processing, rate conversion, and control functions, while block RAM supports sample buffering and configurable finite-state machines. The 172 user I/O permit direct connection to converters, transceiver interfaces, and reference clocks when the corresponding I/O standards are selected. For production designs, apply the manufacturer's timing constraints, clocking architecture, and pin assignments. A migration to the FFG ordering code is electrically attractive only after confirming package-code and qualification requirements.
Được đề xuất
Data Acquisition Systems
The XC5VLX30T-1FF323I can implement a parallel data-acquisition front end when multiple converter outputs must be captured, filtered, timestamped, and transferred. The 172 user I/O allow direct connection to parallel ADC or DAC buses, while 1,327,104 bits of block RAM can provide capture buffers and intermediate storage. Its 30,720 logic cells are sufficient for digital filtering, calibration, packetization, and control. Designers should register source-synchronous interfaces, constrain input timing, and preserve the selected I/O voltage standard. If acquisition rate exceeds internal processing capacity, the design should use a supported memory interface or a higher-speed device rather than relaxing timing constraints.
Được đề xuất
Storage and Interface Controllers
The XC5VLX30T-1FF323I is suitable for storage controllers, interface bridges, and protocol-conversion logic because it combines 30,720 logic cells with 1,327,104 bits of block RAM and 172 user I/O. It can implement command handling, FIFO structures, ECC-related processing, arbitration, and data steering while external memory or storage devices occupy the remaining I/O. The dedicated block RAM helps minimize external memory transactions for command queues and burst buffering. For a reliable implementation, use the manufacturer's supported memory interfaces, define reset and power-up behavior explicitly, and verify all timing against the selected speed grade. The alternative FFG323 variants should be selected only when their ordering and qualification codes meet the product requirement.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC5VLX30T-1FF323I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC5VLX30T-1FFG323I | XC5VLX30T-1FFG323C | XC5VLX30T-1FF323C | XC5VLX30T-1FFG323C |
|---|---|---|---|---|---|
| Package | FCBGA-323, 19 mm × 19 mm | FCBGA-323, 19 mm × 19 mm | FCBGA-323, 19 mm × 19 mm | FCBGA-323, 19 mm × 19 mm | FCBGA-323, 19 mm × 19 mm |
| Brand | AMD | AMD | AMD | AMD | AMD |
| Temperature Ordering Code | I suffix | I suffix | C suffix | C suffix | C suffix |
Bảo phân biệt quan trọng
- Closest identified package-code migration preserves the listed compute resources (vsXC5VLX30T-1FFG323I)
- Maintains the complete FCBGA-323 footprint and 172 user I/O (vsXC5VLX30T-1FFG323C)
- Provides substantial embedded storage for buffering and control logic (vsXC5VLX30T-1FFG323I)
Ghi chú thiết kế
Use the manufacturer FCBGA-323 land pattern and pinout files as the authoritative PCB references. The package has 323 balls but only 172 user I/O, so treating every non-power ball as a general-purpose signal will cause assignment errors. Route clock-capable pins and dedicated configuration pins first, preserve the documented escape geometry, and verify the selected FF or FFG package code against the assembly drawing before releasing copper.
Implement the exact core, auxiliary, and I/O supply architecture, tolerances, sequencing, and bypass network specified in the manufacturer power guidelines. Place each prescribed decoupling capacitor directly between its corresponding supply and ground balls, and use a continuous ground plane to minimize supply inductance. Do not use the listed 0.95 V to 1.05 V core range as a substitute for the full set of rail requirements.
Estimate power from the actual configuration because unused logic, I/O activity, clock rates, and the selected DSP workload can change dissipation substantially. Estimated: combine the manufacturer's static and dynamic power data for the intended design with the PCB thermal model, then add the required temperature margin. For high-activity configurations, provide uninterrupted thermal paths through the board and evaluate whether the exposed-package thermal arrangement needs additional copper or system cooling.
Apply the manufacturer timing constraints to every clocked interface and use registered I/O paths where required. The listed 1098 MHz internal frequency is not a guarantee for external interface timing; board-level skew, I/O voltage standards, pin placement, and clock quality remain critical. For source-synchronous interfaces, follow the recommended reference-plane and trace-matching geometry, and validate the finished board with suitable test equipment.
A matching FCBGA-323 outline does not by itself prove that two order codes are interchangeable. Check the FF versus FFG package designation, I versus C temperature suffix, speed grade, configuration interface, supply requirements, and manufacturer ordering status. For a replacement, program the equivalent device and compare configuration behavior and critical I/O timing before treating it as a production drop-in part.
Thông tin tuân thủ
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were identified for this exact MPN. The FFG package-code variants may indicate a different ordering treatment, but package coding alone is not treated as proof of compliance.