XC7A15T-L2CPG236E - 28nm Artix-7 FPGA | AMD
MPN: XC7A15T-L2CPG236E ✓ Hoạt độngXC7A15T-L2CPG236E Tóm tắt
An FPGA is a programmable logic semiconductor whose digital circuits are configured after manufacture. Within the product hierarchy, the XC7A15T-L2CPG236E is an Artix-7 FPGA, a field-programmable gate array, a programmable-logic device, and ultimately a semiconductor. Artix-7 devices combine configurable logic blocks, programmable I/O, block RAM, digital signal processing resources, and programmable interconnect to implement control logic, signal processing, interface bridging, and embedded systems.
The device provides 16,640 logic cells and 106 I/O in a CSBGA package rated by the manufacturer listing for 1 V operation. Its 28 nm process technology supports a compact implementation of moderately complex digital systems. The -L2 speed grade is intended for designs where lower power consumption is more important than the maximum performance available from faster Artix-7 speed grades. Exact timing, memory, and power ratings should be selected from the appropriate Artix-7 datasheet for the complete device ordering code.
The Artix-7 architecture supports programmable logic, dedicated block RAM, and DSP resources. These blocks can be combined for parallel data pipelines, control processors, communications interfaces, video timing, and instrumentation. The CPG236 package provides 236 package balls and a 0.500 mm fine-pitch arrangement according to a listing for a closely related L1 device; the target listing identifies the device as a 236-pin CSBGA. Board design must follow the official package pinout and escape-routing guidance.
Typical uses include industrial control, test and measurement, embedded communications, camera and image-processing pipelines, audio interfaces, and compact embedded systems. The combination of 16,640 logic cells and 106 I/O is suitable for designs requiring substantial parallel logic without moving to a larger FPGA. A low-power speed grade can also help control total system energy in continuously operating equipment.
A critical implementation step is to preserve the power architecture and ball assignments of the CPG236 package during schematic capture and PCB layout. Decoupling, auxiliary-voltage sequencing, configuration-source wiring, clocking, and high-speed I/O routing must be checked against the manufacturer package files and Artix-7 design documentation before fabrication.
This product record combines the target's verified package, process, logic-cell, I/O, and voltage details with same-package migration options, engineering comparison points, and practical implementation guidance. It is intended to accelerate component selection while preserving the validation required for FPGA timing, power, pinout, and lifecycle decisions.
Bộ thay thế dễ dàng lắp đặt cho XC7A15T-L2CPG236E — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC7A15T-L2CPG236E (cùng hình factor và footprint) — khác nhau ở Package Type, Process Technology, Speed Grade.
XC7A15T-1CPG236C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7A15T-1CPG236I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC7A15T-L2CPG236C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC7A15T-L2CPG236I
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC7A15T-L1CPG236E
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC7A15T-L2CPG236E Tỷ lệ tối đa & tính chất điện
| Device Type | Artix-7 field-programmable gate array (FPGA) |
| Logic Cells | 16,640 cells |
| Process Technology | 28 nm HPL |
| I/O Count | 106 I/O |
| Package Type | CSBGA |
| Package Pin Count | 236 pins |
| Điện áp cung cấp | 1 V |
| Speed Grade | -2 |
| Power Class | Low-power (-L) |
| Programmable Logic Architecture | Artix-7 |
| Trạng thái RoHS | Compliant |
Hướng dẫn cấu hình chân XC7A15T-L2CPG236E 236 pins
Cấu hình chân cho XC7A15T-L2CPG236E (236 pins gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC7A15T-L2CPG236E.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC7A15T-L2CPG236E phù hợp cho 6 Áp dụngs: Industrial Control and Automation, Test and Measurement Equipment, Embedded Communications, Video and Image Processing Pipelines, Audio Interface and Signal Control, Embedded Systems and Instrumentation.
Industrial Control and Automation
The XC7A15T-L2CPG236E fits industrial controllers that coordinate sensors, actuators, interlocks, and machine-status logic while operating continuously. Its 16,640 logic cells provide capacity for parallel control paths, state machines, and communication handling, while 106 I/O support board-level connections. The -2 low-power speed grade is useful where energy reduction matters, provided the design meets timing at that grade. Place the FPGA close to decoupling networks and route clock and control signals away from high-current switching nodes.
Được đề xuất
Test and Measurement Equipment
The XC7A15T-L2CPG236E can implement acquisition sequencing, stimulus control, timing logic, and data preprocessing in compact test equipment. The 16,640-cell Artix-7 fabric supports parallel pipelines, while 106 I/O provide connections to converters, triggers, and communication transceivers. Its 1 V-class supply architecture requires careful rail generation and decoupling. The CPG236 fine-pitch package also demands disciplined escape routing and clean return paths for high-speed timing signals.
Được đề xuất
Embedded Communications
The XC7A15T-L2CPG236E is suitable for protocol bridging, packet processing, and embedded communication endpoints where parallel logic must operate beside limited serial I/O. Its 16,640 logic cells can implement framing, buffers, state machines, and interface adaptation, while 106 I/O connect directly to transceivers and companion processors. Select the required temperature suffix for the installation environment, and keep high-speed serial routes away from switching power inductors to reduce coupling and timing risk.
Được đề xuất
Video and Image Processing Pipelines
The XC7A15T-L2CPG236E can implement pixel transport, timing generation, preprocessing, and sensor-camera interface logic in embedded imaging systems. The 16,640-cell device and 106 I/O are appropriate for parallel pipelines that do not require a larger Artix-7 member. Use short matched routes for clock and pixel buses, keep the FPGA supply return continuous, and validate the selected -2 speed grade against the required pixel-clock and data-path timing.
Được đề xuất
Audio Interface and Signal Control
The XC7A15T-L2CPG236E can manage digital audio transport, sample-rate conversion control, synchronization, and programmable routing in multi-channel audio equipment. Its configurable logic supports parallel data alignment and deterministic control sequencing, while the -L2 family emphasizes lower power for sustained audio workloads. The device is not itself a precision audio converter, so analog stages remain external. Validate clock jitter, I/O timing, and ground continuity with the production configuration and selected temperature grade.
Được đề xuất
Embedded Systems and Instrumentation
The XC7A15T-L2CPG236E works well as the programmable core of compact instrumentation that combines acquisition, calibration, local control, and host communication. Its 16,640 logic cells allow moderate parallel-processing capacity without moving to a larger package, and 106 I/O leave room for sensors, displays, and local memories. Use disciplined power-plane partitioning around the 1 V-class core supply, follow the official CPG236 escape-routing geometry, and preserve configuration access for reliable field updates.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC7A15T-L2CPG236E — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC7A15T-1CPG236C | XC7A15T-1CPG236I | XC7A15T-L2CPG236C | XC7A15T-L2CPG236I | XC7A15T-L1CPG236E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | CSBGA-236 | CSBGA-236 | CSBGA-236 | CSBGA-236 | CSBGA-236 | CSBGA-236 |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 16,640 cells | 16,640 cells | 16,640 cells | 16,640 cells | 16,640 cells | 16,640 cells |
| Speed Grade | -2 | -1 | -1 | -2 | -2 | -1 |
| Temperature Suffix | E | C | I | C | I | E |
| Process Technology | 28 nm HPL | 28 nm HPL | 28 nm HPL | 28 nm HPL | 28 nm HPL | 28 nm HPL |
Bảo phân biệt quan trọng
- Low-power -2 speed grade in the same Artix-7 family (vsXC7A15T-L1CPG236E)
- Same-package timing migration without a board change (vsXC7A15T-1CPG236C)
- Temperature-suffix alternatives preserve PCB compatibility (vsXC7A15T-L2CPG236I)
- Compact 236-ball implementation for moderate logic capacity (vsXC7A15T-1CPG236I)
Ghi chú thiết kế
Use the AMD Artix-7 CPG236 package files as the geometric authority for ball locations, escape routing, and land patterns. The fine-pitch CSBGA package requires short fan-out routes and uninterrupted reference planes. Cross-check every ball assignment in the schematic against the package-specific CSV file, especially configuration, clock, reset, auxiliary supply, and ground balls.
The target is associated with a 1 V supply designation, so generate and distribute the required core and auxiliary rails separately. Place local high-frequency decoupling directly at the appropriate supply and ground balls, maintain a continuous return path, and avoid sharing narrow neck regions between the FPGA and unrelated switching loads. Validate sequencing and rail limits with the relevant Artix-7 power documentation.
Route clocks and high-speed interfaces on controlled-impedance layers with continuous reference planes and short return paths. Keep clocks away from switching-node copper and noisy connector areas, and use the package-specific escape geometry without introducing unnecessary stubs. Re-run static timing with the exact -2 speed grade and final I/O standards after PCB constraints are applied.
A same-package alternative is not automatically a production-equivalent substitute. Compare speed grade, temperature suffix, supported I/O standards, configuration method, resource limits, timing, and power before approving XC7A15T-1CPG236C, XC7A15T-1CPG236I, or another CPG236 migration option. Rebuild the implementation, rerun timing, and repeat signal-integrity and power checks.
Thông tin tuân thủ
The JLCPCB product result identifies the XC7A15T-L2CPG236E as RoHS compliant. No additional compliance declaration was identified in the referenced manufacturer-series information.