XC7K410T-1FBG676I - Kintex-7 406,720-Cell FPGA | AMD
MPN: XC7K410T-1FBG676I ✓ Hoạt độngXC7K410T-1FBG676I Tóm tắt
A Kintex-7 FPGA belongs to the FPGA and CPLD product hierarchy, combining configurable logic blocks, programmable I/O, block RAM, DSP slices, digital clock managers, and high-speed transceiver resources. FPGAs differ from fixed-function logic ICs because engineers define the circuit architecture, interfaces, and parallel processing behavior in HDL, synthesis tools, and programmable device software. This makes the family suitable for designs requiring substantial parallelism or hardware acceleration.
Key features include 406,720 logic cells, a -1 speed grade, an industrial temperature designation, and support for standards including PCIe Gen3 and 10 Gigabit Ethernet. The device also includes MMCM and PLL clock-management resources, allowing designers to generate, divide, multiply, phase-shift, and jitter-filter reference clocks for high-speed interfaces and parallel processing pipelines.
The FBG676 package exposes 676 ball contacts and 250 configurable I/O sites. High-speed I/O can be assigned according to bank voltage requirements, while dedicated resources support high-performance serial links. Exact pin functions, differential I/O standards, voltage limits, AC timing, and transceiver rates must be selected from the FBG676 package tables in the AMD Kintex-7 data sheet DS182 and the corresponding package pinout files.
Typical uses include PCIe endpoint and accelerator designs, 10 Gigabit Ethernet equipment, industrial video processing, high-throughput digital signal processing, communications infrastructure, and test-and-measurement systems. Designers can distribute independent channels across DSP slices and block RAM, then implement clocking, serializing, and data-valid logic around those parallel processing cores.
PCB implementation should preserve the package's power, ground, decoupling, and high-speed routing requirements. Place decoupling capacitors near the relevant supply balls, maintain the documented ball-out and plane connections, and route high-speed differential pairs as controlled-impedance transmission lines. Validate bitstream, timing, power integrity, and thermal performance before releasing a production layout.
This page combines device identification, verified source links, package-level details, engineering alternatives, comparison criteria, and design guidance. It also separates confirmed drop-in options from broader FPGA migration choices, helping engineers evaluate PCB reuse without overlooking speed grade, density, temperature, and resource differences.
Bộ thay thế dễ dàng lắp đặt cho XC7K410T-1FBG676I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
XC7K410T-2FBG676I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC7K325T-1FBG676I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7K480T-1FBG676I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC7K410T-1FBG676I Tỷ lệ tối đa & tính chất điện
| Device Type | Kintex-7 FPGA |
| Logic Cells | 406,720 cells |
| Process Technology | 28 nm |
| Device Speed Grade | -1 |
| Temperature Grade | Industrial |
| Package Type | 676-ball Flip Chip BGA (FBG676) |
| Package Pin Count | 676 balls |
| User I/O Count | 250 I/O |
| Clock Management Resources | MMCM and PLL |
| Supported High-Speed Protocol | PCIe Gen3 |
| Supported Network Standard | 10 Gigabit Ethernet |
| Programmable Logic Type | FPGA |
| Kiểu lắp đặt | Surface Mount |
Hướng dẫn cấu hình chân XC7K410T-1FBG676I 676 balls
Cấu hình chân cho XC7K410T-1FBG676I (676 balls gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC7K410T-1FBG676I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC7K410T-1FBG676I phù hợp cho 6 Áp dụngs: PCIe Gen3 Endpoint and Accelerator, 10 Gigabit Ethernet Data Processing, Industrial Video and Image Processing, Digital Signal Processing and Acceleration, Communications Infrastructure and Protocol Conversion, Test and Measurement Instrumentation.
PCIe Gen3 Endpoint and Accelerator
The XC7K410T-1FBG676I fits PCIe Gen3 endpoint, accelerator, and data-capture systems that combine high-speed serial connectivity with substantial parallel logic. Its 406,720 logic cells can host protocol interfaces, DMA engines, packet buffers, and application-specific processing, while the -1 grade provides a defined performance class for timing closure. Place the design in the correct high-speed transceiver and I/O banks, follow the AMD reference power architecture, and validate channel performance with the intended board stack-up. The practical benefit is consolidation of control logic and high-throughput processing in one programmable device; the trade-off is careful lane planning, clocking, and power budgeting around the transceiver and core rails.
Được đề xuất
10 Gigabit Ethernet Data Processing
The XC7K410T-1FBG676I is suitable for 10 Gigabit Ethernet line cards, protocol analyzers, traffic generators, and network test equipment. Its 406,720-cell fabric can implement multiple packet-processing pipelines, lookup logic, counters, and buffering functions around the high-speed serial interface. Engineers should use the documented bank assignments for the selected Ethernet interface, apply the required reference clock, and preserve controlled-impedance routing between the FPGA and network PHY or optical interface. Compared with a fixed-function network controller, the FPGA permits programmable packet formats and test patterns. The design trade-off is that timing closure, congestion control, and thermal verification must be handled for every deployed line rate and traffic profile.
Được đề xuất
Industrial Video and Image Processing
The XC7K410T-1FBG676I supports industrial video processing systems requiring parallel pixel pipelines, control logic, and programmable interfaces. Its 406,720 logic cells can support multiple parallel channels, while MMCM and PLL resources help derive stable clocks for pixel capture, processing, and output timing. The industrial-grade ordering code suits equipment expected to operate outside consumer-temperature conditions, subject to the exact operating-range limits in the AMD documentation. Place high-speed memory and video interfaces in banks with compatible voltage requirements, use the pinout files for ball assignment, and maintain signal-integrity spacing on long parallel routes. The advantage is reconfigurable processing and broad I/O capacity; the cost is substantial implementation complexity and careful thermal design.
Được đề xuất
Digital Signal Processing and Acceleration
The XC7K410T-1FBG676I can implement parallel DSP pipelines, fixed-point filtering, modulation, correlation, or custom accelerator logic in a single Kintex-7 device. The large 406,720-cell fabric allows several processing pipelines to operate concurrently while control code, memory interfaces, and data capture remain programmable. Engineers should select clock regions and dedicated resources according to the implementation report, then verify timing with realistic stimulus rather than block-count estimates alone. The same-package XC7K480T-1FBG676I provides 72,000 additional logic cells for larger designs, while the XC7K325T-1FBG676I reduces capacity by 19.8%. This makes the target a useful middle-density option when performance, board area, and design capacity must be balanced.
Được đề xuất
Communications Infrastructure and Protocol Conversion
The XC7K410T-1FBG676I fits communications infrastructure equipment requiring parallel interfaces, programmable protocol logic, clock recovery, and flexible data routing. Its MMCM and PLL resources support clock generation and jitter conditioning, while the 250 I/O sites provide substantial connectivity for module interfaces. For a new board, use the FBG676 package files to assign banks and follow AMD's decoupling and high-speed routing guidance. For an existing board, compare the complete ball map and resource usage before selecting a replacement. The primary advantage is the combination of programmable logic and high I/O availability in one device; the main engineering burden is ensuring the power architecture and signal-integrity constraints remain unchanged when the device or speed grade changes.
Được đề xuất
Test and Measurement Instrumentation
The XC7K410T-1FBG676I is appropriate for programmable test equipment, protocol analyzers, waveform generators, and automated measurement systems requiring flexible timing and interface logic. Its logic capacity can support acquisition pipelines, pattern generation, sequencing, and embedded control, while the clock-management resources allow multiple related domains to be derived with controlled phase relationships. The design should establish an exact clocking tree, isolate sensitive routes, and use the package-specific ball map to plan high-speed and high-voltage I/O assignments. Compared with an ASIC implementation, the FPGA shortens the path from architecture to working instrument. The principal trade-off is lower unit economics at very high volume and the need for careful configuration, thermal, and board-level validation.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC7K410T-1FBG676I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC7K410T-2FBG676I | XC7K325T-1FBG676I | XC7K480T-1FBG676I |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD |
| Package | FBG676 | FBG676 - same package | FBG676 - same package | FBG676 - same package |
| Logic Cells | 406,720 cells | 406,720 cells | 326,080 cells | 478,720 cells |
| Speed Grade | -1 | -2 | -1 | -1 |
| Temperature Grade | Industrial | Industrial | Industrial | Industrial |
Bảo phân biệt quan trọng
- Balanced 406,720-cell density within the FBG676 Kintex-7 family (vsXC7K325T-1FBG676I)
- Lower device density than the highest-capacity same-package option (vsXC7K480T-1FBG676I)
- Same-package speed-grade migration without changing the base device density (vsXC7K410T-2FBG676I)
Ghi chú thiết kế
Use the AMD Kintex-7 FBG676 package pinout files as the authoritative ball-map starting point, and match all supply, ground, configuration, clock, and user I/O assignments to the selected bank voltages. Place decoupling capacitance at the appropriate power balls with short, low-inductance paths, and avoid routing user signals through plane discontinuities. Before PCB release, run the AMD design-rule checks and compare every ball assignment against the final HDL constraints and implementation report.
Treat high-speed serial and differential interfaces as controlled-impedance structures rather than ordinary digital nets. Use the reference stack-up and impedance targets from the AMD design guidance, maintain symmetric routing, avoid stubs, and place clock and transceiver components where the implementation constraints require them. Validate insertion loss, return loss, skew, and jitter through simulation before fabrication, since electrical compliance of the FPGA alone does not guarantee a compliant channel.
Estimated: the device dissipation depends on the implemented design and cannot be represented by one universal value. Run AMD's power estimator with the final logic utilization, I/O activity, clock frequencies, transceiver state, and ambient assumptions, then include board-level thermal resistance. Preserve the exposed package heat-transfer path with the recommended copper and via arrangement, and verify junction temperature in the assembled system under worst-case operating conditions.
Do not treat an FBG676 package as interchangeable with FFG676 solely because both use 676 contacts. Device naming, ball assignment, voltage architecture, and supported resources must be compared package by package. Likewise, do not approve a speed-grade or density migration from the MPN suffix alone; re-run synthesis, place-and-route, timing analysis, power estimation, bitstream generation, and hardware regression for the exact replacement part.
Thông tin tuân thủ
No exact material-compliance declaration for XC7K410T-1FBG676I appears in the cited product and distributor records. Confirm the current RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations for the ordered manufacturing lot.